Study on Dissimilar Aluminium Alloys of AA7075 and AA6061 using Friction Stir Welding

The magnesium alloy exhibited the average tensile strength of about 256 MPa, which was higher than that of the aluminum alloy (about 200 MPa). In all the tool rotation speeds, the

The present investigation is aimed to study the tensile strength, microstructures and corrosion behavior of underwater friction stir welding (UFSW) welded joints of

It is observed that the tensile strength performance of friction stir welded aluminum alloys is superior to that of fusion welded aluminum alloys for joining materials

Study of Dissimilar Welding AA6061 Aluminium Alloy and AZ31B Magnesium Alloy with ER5356 Filler Using Friction Stir Welding.. To cite this article: M I I Mahamud et al 2017

[18] Fujji Hidetoshi and Cri Ling., Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys, journal of materials

The parameters affect tensile strength and hardness properties of dissimilar joining SSM356 aluminum alloys with SSM6061 aluminum alloys by using RFW can be concluded

heat flow phenomena for friction stir welded joints using 3D finite element heat transfer analysis program, the heat distribution was plotted in AA6061 alloy.. It has been

Index Terms---Gas metal arc welding, Friction stir welding, aluminium alloys, welding techniques, Destructive test, Non destructive test.. Friction stir