Software User Manual. Table of Contents

Click to view Web Link, click Chapter 8, Click Web Link from left navigation, then click Plug and Play below Chapter 8. Operating System Functions How do you install a

The newly added device should be displayed in Devices panel. The following shows steps to add extensions for the new device. Click link of the device shown in the Devices panel.

To pair a device using the Microsoft stack you need to click on the Bluetooth Icon in the task bar and then select Add a Device..

Click “Status” on the left hand side then click “Device Information” at the top of the page. Check for an IP Address in the “WAN” section. If you still do not pull an IP

Click upper left "Edit", click the device name, enter the device information edit interface;.. Click "Delete" to delete

The mechanical properties for test specimen produced using a new mould differed by up to 57% when tested regarding their quasi-static tensile behavior and 9% with

1) Click or and select to enter the Device Management interface.. 3) Edit the device name (as you like, not domain name here) in the Alias field. 4) Click the Register Mode

1. Make sure that the Control access to the protected objects option is enabled. In the Device buses section, click to add a device to the Blocked buses list. Select device buses