• No results found

SCHEDULE PRODUCTION. (Banner Schedule Production Manual, Sept 2, 2015) SCHEDULING OFFICE

N/A
N/A
Protected

Academic year: 2021

Share "SCHEDULE PRODUCTION. (Banner Schedule Production Manual, Sept 2, 2015) SCHEDULING OFFICE"

Copied!
24
0
0

Loading.... (view fulltext now)

Full text

(1)

SCHEDULE PRODUCTION

(2)

What Banner Forms to Use ... 2  

Adding a New Class – Basic Class Information ... 3  

Adding Seat Count and Wait List ... 6  

Adding Meet Days, Time and Room ... 6  

Adding or Changing an Instructor ... 9  

Adding or Changing an Assignment Type & Loadfactor ... 111  

Schedule Calendar Form - SSAACCL ... 133  

Deleting a Class During Schedule Production ... 14  

Faculty Schedule Query – SIAASGQ Form ... 15  

Schedule Section Query – SSASECQ Form ... 16  

Banner Buttons, Icons and Keyboard Shortcuts ... 17  

Military Time Grid ... 17

Calculating Meeting Times ... 179

(3)

What Banner Forms to Use

Adding a new class:

1. SSASECT form – enter class information.

2. SIAASGN form – enter pay information such as, assignment type, loadfactor, etc. 3. SSAACCL form – enter Academic Calendar Type code (students cannot register if

code is not entered).

Modifying faculty or class information:

1. SSASECT form – modify the appropriate information.

2. SIAASGN form – need to re-enter information if instructor was modified in the SSASECT form.

Modifying an assignment type & loadfactor:

1. SIAASGN form – modify the appropriate information.

SSASECT SSAACCL SIAASGN

Adding a new class x x x

Change meeting days and time x

Change instructor x x

Change assignment type & loadfactor x

NOTE: Information must be re-entered in

SIAASGN form if the instructor is added or removedfrom SSASECT form.

(4)

Adding a New Class – Basic Class Information

Adding a new class in Banner requires inputting information in three of the following Banner forms:

SSASECT, SIAASGN, and SSAACCL. Complete the forms in the order that they are listed.

ADDING BASIC CLASS INFORMATION:

1. Go to your Banner main page, type “SSASECT” form name in the [Go To] field, and hit the

[Enter] key on your keyboard.

2. Enter effective term for the class in the [Term] field.

Term = 6-digit numbers (year + quarter code + school code) Quarter codes: Summer=1, Fall=2, Winter=3, Spring=4 School codes: De Anza=2, Foothill=1

Ex.201322 = Fall 2012, 201332 = Winter 2013

NOTE: Summer is the first quarter in a given Academic Year. Example, 2013-2014 Academic Year starts with:

Summer 2013 = 201412

Fall 2013 = 201422

Winter 2014 = 201432

Spring 2014 = 201442

(5)

4. Click on the [Next Block] icon or press [Ctrl+PgDn] to enter the class information.

5. Enter the [Subject] and [Course Number] fields. Use the [Tab] key to move to the next field.

[All course numbers must begin with a “D” for De Anza College, and “F” for Foothill College.] Ex. Subject=EWRT Course Number=D001A

6. Enter class section number in [Section] field.

7. Skip the [Cross List] field, even if it is a cross-listed class.

[Skip for now, Scheduling Office will set this up in the future.]

8. Enter “DA” or “DO” in the [Campus] field. [Classes offered on campus should have “DA” in the Campus field, use “DO” for classes that are off-campus and abroad.]

9. Enter “O” in the [Status] field. [The code “O” stands for Open-Students May Register, classes with this code will be displayed in Banner Self Service and will allow students to register for the class if the seat count > 0.]

IF YOU MADE A MISTAKE, delete class by hitting [Record Remove] or [Shift+F6] and

[Save].

10.Click on the pull-down menu in the [Schedule Type] field, select the appropriate schedule type from the list, and click [OK] button. [The list of schedule types is defined by the catalog. A

schedule type not listed cannot be used. For distance learning class, enter the code “72” in this

field otherwise modification would not be possible if class meeting and instructor information have

already been inputted. For hybrid, enter the code “88”.]

Ex. 02 = lecture, 04 = Lab, 06 = Lec-Lab, 08 = Lec-Lab.

11.Hit the [Tab] key to default in data for the [Instructional Method] field.

12.Leave the [Grade Mode] field blank. [Information is pulled from the catalog. If class is only Pass/NP enter in “P” otherwise leave blank.]

13.Enter one of the following choices in the [Session] field: D, E or W. [D=day, E=evening-classes starting at 4:30pm, W=weekend.]

14.Leave the [Special Approval] field blank. [This field is used to indicate the person who could waive students for the class, if the class has specific registration requirements.]

15.Leave the [Duration] field blank.

16.How many weeks is the class? Use the pull-down menu in the [Part of Term] field, select from the list, and click [OK] button.

Next block icon

Use “1” = Full Term for all 12-week classes. Use “S” Term Spanning for classes that meet for a couple of days or for a number of weeks that is not listed as one of the

(6)

17.Skip the following fields: [Registration Dates][Start Dates]

[Maximum Extensions] [CEU Hours]

[Billing Hours][Contact Hours][Lecture]

[Lab][Other]

[Reporting Year]

18.Click on the pull-down menu in the [Attendance Accounting Method] field, select the appropriate accounting method from the list, and click [OK] button.

D Summer classes or classes that meets 5 or more times for the same number of

hours at each class meeting.

W 12-week classes that meet every week.

IW Distance learning and hybrid classes during 12-week quarter, special projects,

and internship (ex. ADMJ 64).

ID Distance learning and hybrid classes, special projects, and internship during

summer quarter.

P APRN classes, apprenticeship, intercollegiate PE classes or classes that do not

meet for a consistent number of hours at each meeting.

19. Verify that the [Print] check box is checked if you want the section to show on the web.

Uncheck the Print box if you don’t want the section to be available on the web.

20. Verify that the [Voice Response & Self Service Available] box is checked if you want the section available on the web. Uncheck the box if you don’t want the section to be available on the web.

Information in these fields will default in from the catalog or other tables. DO NOT modify these fields.

(7)

21. Verify that the [Gradable] box is checked. If you have checked or unchecked any boxes SAVE at this time.

22. Click on [Save] icon.

Adding Seat Count and Wait List

23. In SSASECT form, click on the [Section Enrollment Information] tab.

24. Enter Seat Count in [Maximum] field. Enter waitlist in [Waitlist Maximum] field. [Class that is opened to a captive group of students, list seat count=0 and waitlist=0.]

25. Click on [Save] icon.

Adding Meet Days, Time and Room

(8)

27. Hit TAB once. Under the Meeting Type, specify only one of the three below. We do not use any other meeting type.

CLAS = lecture LAB = laboratory

TBA = distance learning or hybrid online parts

28. After specifying Meeting Type, hit TAB twice to default in the dates you established on the 1st block of SSASECT. Select the days of the week the course is offered. Enter your start and end times in Military Time (see table in appendix). For assistance in calculating the start and end times, see table – Calculate Meeting Times – in appendix.

29. Session Indicator for the first line will default to 01 (it is the first field on the line). If you have more than one meeting line, change the session indicator accordingly for each additional meet line. DO NOT use the same session indicator if you have more then one meet line. A course with both a Lecture and a Lab component, MUST have times and days entered on separate lines, with different session indicators.

IF YOU MADE A MISTAKE, delete class by hitting [Shift+F6] or [Record Remove] and

[Save].

Converting to military time: Before 1pm – time is the same.

Ex: 8:00am = 0800, 11:30am = 1130 1pm or later – add 12 to the hours. Ex: 1:00pm = 1300, 3:30pm = 1530

(9)

30. Calculating Hours per Day, Hours per Week and Total Contact Hours is done automatically or manually depending on:

a. If the Meeting Type is Clas or Lab, all the hours will all be calculated

automatically. Ensure that the INCLUDE BREAK TIME box is checked if it is not already checked. Verify that the hours scheduled for the section is the same as the information from the 1st block of SSASECT.

b. If the Meeting Type is TBA (distance learning or hybrid online parts), all the hours will need to be calculated manually. Click the Override Hours Indicator box, TAB to Hours per Day and Hours per Week fields and enter the same hours in both fields. The Hours per Day and Hours per Week are determined by the information from the 1st block of SSASECT. TAB to the Total Contact

Hours. This field = Hours per Week multiplied by 11.67.

Hours scheduled must equal the catalog hours that is listed on 1st block of SSASECT.

(10)

31. Click on [Save] icon to save your data. If you get a room conflict error message, it means

that the room is double booked. Perform one of two options:

a. If it is a valid double booking due to a cross-listing or shared lecture, then type “O” under the Meeting Conflict Override field then click on [Save] icon.

b. If it is NOT a valid double booking, change the room assignment to “TBA”, then type “O” under the Meeting Conflict Override field then click on [Save] icon.

32. Click [Next Block] or press [Ctrl+PgDn] to go to the Instructor Block.

Adding or Changing an Instructor

34. Add an instructor to a newly added section: enter the instructor [ID]. *If you don’t know the instructor ID, click on the down arrow button. Click [Next Block] or press

[Ctrl+PgDn]. Tab to last name field and enter instructor last name followed by % sign. (NOTE: Case sensitive, i.e. Smith%). [Query execute] or [F8]. Look for the appropriate instructor and highlight. Double click to add the instructor. Then go to step 36.

35. Changing an instructor to an existing section: Make sure you are in the Instructor block. To delete the instructor, hit [Shift+F6] or [Record Remove]. YOU CAN NOT TYPE OVER the existing instructor.

NOTE: Each division is designated a specific number of rooms to

use during the class schedule production phase. If your class was assigned to a room outside of your division last year, it does not mean that the classroom can be used again this year. Re-assign the class to a room in your division or change the room to “TBA”.

(11)

36. If you entered or selected an instructor ID and the system comes back with the error message “person not an instructor, press LIST for instructors”, contact Cynthia Smith to verify instructor’s status.

37. If the Instructor ID you entered or selected is valid, enter in the 100% for [Percent of Responsibility] and 100% for [Percent of Session].

DO NOT change [Percent of Responsibility], it should always be 100%. If two instructors are team teaching, sharing the same meet line/session indicator, then change [Percent of Session] = 50% and [Percent of Responsibility] = 100%for each instructor.

NOTE: If you select STAFF (ID = 66666666) as the instructor or if you get an instructor conflict error message, and it is due to a cross-listed or shared lecture class, check the

[Instructor Conflict Override] box.

38. Click on the SAVE icon.

(12)

Adding or Changing an Assignment Type & Loadfactor

40. To access SIAASGN form:

a. If you are already in the instructor field in SSASECT > Go to OPTIONS > Select

[Faculty Assignments (SIAASGN)]. Click [Next Block] or press [Ctrl+PgDn].

b. If you are NOT in SSASECT form, in the [Go To] box type in the main page of Banner type in SIAASGN and hit [Enter]. Then enter the Instructor’s ID in the

[ID] field and enter the term code in the [Term] field. Click [Next Block] or press [Ctrl+PgDn].

41. SIAASGN displays the information for each CRN that this particular instructor has been assigned to teach for that term. Click on the arrow on the scroll bar to the right to view all assignments.

42. If class is for PAY, Assignment Type = 0.

a. Modify the [Override Workload] field if the load is different from what is being displayed in the [Workload] field.

b. Blank out the following fields: [Contract Type], [Position Number], and

[Position Number Suffix].

(13)

43. If class is for PAY, Assignment Type = 2, 4 or 8.

a. Modify the [Override Workload] field if the load is different from what is being displayed in the [Workload] field.

b. If the Assignment Type = 2

i. In the [Contract Type] field enter “SU” for summer quarter and “FO” for all other quarters.

c. If the Assignment Type = 4 or 8

i. In the [Contract Type] field enter “SU” for summer quarter and “AC” for all other quarters.

d. In the [Position Number] field = quarter term code

e. In the [Position Number Suffix] field enter 2-digit number, such as 00, 01, 02, etc. DO NOT duplicate a Position Number Suffix. Use a different one for each assignment.

f. Enter the appropriate Assignment Type in the [Assignment Type] field. 44. If class is for NO PAY, Assignment Type = 3 or 5.

a. Enter “0” in the [Override Workload] field.

b. Blank out the following fields: [Contract Type], [Position Number], and

[Position Number Suffix].

c. Enter the appropriate Assignment Type in the [Assignment Type] field. 45. Click on the SAVE icon.

CHECK the [Override Conflicts] box, if you receive a Schedule Conflict error message. This is usually due to cross-listing or shared lecture sections.

A/T= 2, 4, 8 à requires contract type, position number, and suffix. A/T= 0, 3, 5 à make sure these fields are BLANK: contract type, position number, and suffix.

(14)

Schedule Calendar Form - SSAACCL

46. SSAACCL populates important dates such as census dates, last day to enroll, and refund, these dates impacts students and A&R. These dates will not be populated if the [Academic Calendar Type] field is blank.

To access SSAACCL form:

a. If you are already in SSASECT > Go to OPTIONS > Select [Section Calendar (SSAACCL)]. Click [Next Block] or press [Ctrl+PgDn].

b. If you are NOT in SSASECT form, in the [Go To] box type in the main page of Banner type in SSAACCL and hit [Enter]. Then enter the term code in the [Term] field and the CRN in the [CRN] field. Click [Next Block] or press [Ctrl+PgDn].

47. In the [Academic Calendar Type] field enter the Part of Term code that you’ve entered in SSASECT. Hit [Enter] key on your keyboard. Click on the SAVE icon.

Code must be the same in these 2 fields

(15)

Deleting a Class During Schedule Production

1. Go to the SSASECT form.

2. Enter the term code in the [Term] field and the CRN in the [CRN] field. Click [Next Block]

or [Ctrl+PgDn].

3. Click [Remove Record] or [Shift+F6].

4. Click on the SAVE icon.

(16)

Faculty Schedule Query – SIAASGQ Form

1. SIAASGQ form displays the faculty’s class schedule by term.

2. Open up SIAASGQ. Enter the term code in the [Term] field. Enter instructor’s ID in the

[ID] field or type in the instructor’s name (LastName, FirstName - capitalize first letter of last name and use % as a wild card). Click [Next Block] or [Ctrl+PgDn].

(17)

Schedule Section Query – SSASECQ Form

1. To find a class or list of classes, from the SSASECT form enter the term code in the

[Term] field. In the [CRN] field click on the drop down arrow. This will cause the SSASECQ form to pop up.

2. In the SSASECQ form complete the appropriate fields to locate the classes you want. You do not have to fill in every field.

Ex: If you are looking for all EWRT D001A class, enter “EWRT” in the [Subject] field and “D001A” in the [Course] field. Press [F8] or [Execute Query] button.

Another option to using SSASECQ form is the Active Division Report available in MyPortal.

(18)

Banner Buttons, Icons and Keyboard Shortcuts

Navigation Button or Link… Lets you… Keyboard Shortcuts

Save F10

Rollback, clear all fields. Shift+F7

Insert record

Remove record Shift+F6

Previous record Next record

Previous block Ctrl+PgUp

Next block Ctrl+PgDn

Enter query or search page.

Execute query or search. F8

Cancel query or search. Send or view message Print

Broadcast message Online help

Exit all forms and return to main menu

(19)

Military Time Grid

Military time is the same for time before 1pm, for example 10:30am = 1030 in military time and 12:30pm = 1230. For times that are 1pm and later, add 12 to the hours and the minutes remain the same, for example 1:35pm = 1335 in military time and 6:15pm = 1815.

Regular Time Military Time Regular Time Military Time

Midnight 0000 Noon 1200

1:00 a.m. 0100 1:00 p.m. 1300

2:00 a.m. 0200 2:00 p.m. 1400

3:00 a.m. 0300 3:00 p.m. 1500

4:00 a.m. 0400 4:00 p.m. 1600

5:00 a.m. 0500 5:00 p.m. 1700

6:00 a.m. 0600 6:00 p.m. 1800

7:00 a.m. 0700 7:00 p.m. 1900

8:00 a.m. 0800 8:00 p.m. 2000

9:00 a.m. 0900 9:00 p.m. 2100

10:00 a.m. 1000 10:00 p.m. 2200

(20)

Calculate Meeting Times

Clock hour = Class hour + Passing Time/Break 60-minutes = 50-minutes + 10-minutes

Each class hour scheduled requires a 10-minute break time to be included in the scheduled time except the first and last class hour.

Hour(s) Per Day Break Time Start/End Time Scheduled Time

1 0 8:30 – 9:20 50 minutes

1.5 0 8:30 – 9:45 75 minutes or

1 hour 15 minutes

2 10 8:30 – 10:20 110 minutes or

1 hour 50 minutes

2.5 10 8:30 – 10:45 135 minutes or

2 hour 15 minutes

3 20 8:30 – 11:20 170 minutes or

2 hour 50 minutes

3.5 20 8:30 – 11:45 195 minutes or

3 hour 15 minutes

4 30 8:30 – 12:20 230 minutes or

(21)

Option to Add students to Special/Honors class

Option A:

Step 1 - Student restriction via SPECIAL APPROVAL field in SSASECT form Step 2 - Clearance done through SFASRPO form

Example: MPS Program below:

(22)
(23)

Option B:

Step 1 - Student restriction via Student Cohort field in SSARRES form Step 2 - Clearance done through SGASADD form

Example Honors Program:

(24)

Step 1 - Student restriction via Student Cohort field in SSARRES form

References

Related documents

The two methods for determining azimuth from the sun are methods for determining azimuth from the sun are the the hour angle method and the altitude method.. hour angle method and

Os resultados florísticos encontrados no campo limpo úmido da FAL foram comparados com outros trabalhos que contemplaram o estrato herbáceo-arbustivo de diferentes

Animals at high risk of developing colon cancer were given probiotics and the researchers looked for the appearance of tumours, or early signs of damage to the intestinal

To add a competition to your schedule, locate the “Scheduling” icon in the top menu of the Manage Team interface and click the appropriate “Add..

However, their roles remain unclear and the relationship between scapular dyskinesis and pectoralis minor muscle length measurements has limited evidence (Yeşilyaprak et al.,

Heat transfer in compression chamber of a revolving vane (RV) compressor. Journal bearings design for a novel revolving vane compressor. Experimental Study of the Revolving

As part of a multiyear operational research study, a baseline survey was conducted to understand the predictors of contraceptive use and demand for family planning services

– Cohort analysis: based on fertility patterns of a group (cohort) of women who go through childbearing years at the same time – Micro analysis: fertility analysis of persons.. –