END USER MANUAL FOR LION TREE
We would like to Thank You for purchasing a Lion Tree product. We know you will have many years of use. We would like you to please have a read through
DESCRIPTION
Lion Tree lights have been manufactured with the end user in mind. Our lights can be used in vertical farming, as well as greenhouse indoor and tent growing.
Please contact us should you need any advice or assistance.
WARNING
This product should only be used as it is intended.
PRODUCT SPECIFICATIONS
Model Size LxBxH Weight Draw Supernova 240 Std 730 x 330 x 110 4.7 Kg Max. 237W Supernova 240 Adv 730 x 330 x 110 5.4 Kg Max. 242W Supernova 320 Std 880 x 330 x 110 6.9 Kg Max. 318W Supernova 320 Adv 880 x 330 x 110 7.5 Kg Max. 321W Double barrel Std 610 x 160 x 110 3.1 Kg Max 101W Double barrel Adv 610 x 160 x 110 3.9 Kg Max. 105W Limpet 200 310 x 310 x 135 3.5Kg Max. 198W
Operating temperature (Est) 45-58 C⁰
Product Features
• 90% dimmable, enabling greater control in all stages of growth
• Customised waterproof LED housing with photometric lenses
• White light with customized full spectrum, for vegetative and flowering cycle
• Added Deep Red spectrum 660nm
• 90 % Dimming
• 90 / 140 degree beam angle, can be customised.
• Low operating temperature 40-50 degrees Celsius.
• Water and humidity proof (IP 65/ K10
• Working voltage: 90-305Volts @ 50-60Hz
• 5 year warranty on all parts and construction
• MOSO drivers available
• CE, RoHS, CB, LM-79, LM-90 approve
• Bridgelux chip set.
OPTICS AND LIGHT DISTRIBUTION
Loin Tree lights come equipped with 90/140 Degree Optical grade lenses, that focus the light where it is needed. With optimal spacing between modules we have allowed for the crossing of light, to create an even level of PPFD,
throughout the grow area. The lenses further protect the chip set, against moisture and dust ingress.
PAR, PPF, PPFD AND ENERGY
DISTRIBUTION
Lion Tree LED grow lights have been designed to be as efficient as possible. You will find all the specific information with regards to these values on the Lion
Tree website. www.liontree.co.za
RECOMMENDED HANGING HEIGHTS
Veg 400 PPFD Mid flower 650 PPFD End flower 650/800 PPFD
Veg stage Mid flower End flower Supernova 320 700/800 mm 500/600mm 450/500mm Supernova 320 S 500/600mm 400/500mm 300/350mm Supernova 240 700/800 mm 500/600mm 450/500mm Supernova 240 S 400/500mm 400/350mm 300/350mm Double Barrel 100W 600mm 500mm 450mm Double Barrel 100W S 500mm 450mm 300mm Limpet 200W 500 mm 400mm 350mm
INSTALLATION OF FITTING
Before installing the fitting, please make sure the unit is not plugged in and the power is off.
After opening the box, please ensure all is in order, before use. Please feel free to contact us should you need any assistance.
Install light fitting at recommended height for plant cycle, take into consideration the PPFD Map to determine, the perfect placing of plants under the light footprint.
Use the hangers on the fitting to attach/ hang your light to a solid structure. Make sure the structure is strong enough to hold the fitting.
Lion Tree lights come with a South African 3 pin plug and is compliant with South African laws.
Do not cover the fins of the fitting at any time. The heat sink is designed to move heat away from the LEDs, obstructing this could lead to LED failure.
WARNING AND SAFETY
Do not open the light fitting at any time, as this causes risk of electrical shock as well as voiding the warranty on the fitting.
Never look directly into the light
Always use LED eye protection when working in the area, when the fitting is on. The user is responsible for installing the light to make sure it is safe and works correctly, should you have any doubts, please contact a qualified person to assist
with installation.
CLEANING OF FITTING
Please ensure that the fitting has been unplugged from the mains before, cleaning takes place.
Ensure the fitting has cooled down before cleaning.
Use a soft wet cloth to clean the lenses and body work. The lenses are made from polycarbonate, please be extra careful when cleaning the lenses. You could use a light soap mix to wipe them down with a soft damp cloth. Ensure lenses are clear
after. Don’t use solvents, window cleaner, chemicals that are aggressive. Lion Tree fittings are IP67 rated meaning, they will not be affected by over spray
from the grow environment.
Please don’t use abrasive materials on lenses.
Clean fitting in between every grow in order, to prevent cross contamination between crops.
We Thank You for supporting Lion Tree and we look forward to your review of the product on our website.
Welcome to the Lion Tree Family. Thanking you
