• No results found

Design of Microstrip Patch Antenna with Branch Feeding Technique for Tetra Band Applications

N/A
N/A
Protected

Academic year: 2020

Share "Design of Microstrip Patch Antenna with Branch Feeding Technique for Tetra Band Applications"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

figure 2. Here we observed the return loss is improved to -25.24 dB by introducing this slot in line feed
Figure 3: 2 nd Iteration of Proposed Antenna
Figure 6: Return loss of 0th iteration
Figure 9: Return loss of 3rd iteration
+4

References

Related documents

According to the verification at Trift Glacier and the compar- ison with the modeled bed topography, the first two levels of the assessment strategy are sufficient for a preliminary

Since the low degree of variability in body weight cannot be ascribed to inbreeding, which was practised irregularly and on about the same scale in all three races, it

This thesis will focus on the use of neural networks for plant identification, using the inverse plant in conjunction with a PID control scheme, an internal model control scheme,

We have identified a cell cycle delay in Saccharomyces cerevisiae RNase MRP mutants. Mutants delay with large budded cells, dumbbell-shaped nuclei, and extended spindles

While in the other approaches, vendor had to directly interact with the coin card, in this system, the vendor needs to interact only with the identity element. Such an

educators need to learn relevant curriculum and appraising effectiveness of teacher educator. preparation program for the student teacher is also very

EURASIP Journal on Applied Signal Processing 2004 5, 762?771 c? 2004 Hindawi Publishing Corporation Approaching the MIMO Capacity with a Low Rate Feedback Channel in V BLAST Seong