• No results found

APPLICATION RESIDENTIAL BUILDING PERMIT

N/A
N/A
Protected

Academic year: 2021

Share "APPLICATION RESIDENTIAL BUILDING PERMIT"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

(1)

APPLICATION

RESIDENTIAL BUILDING PERMIT

Requirements - PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY

Your application will not be accepted if any of the below items are missing or incomplete. Incomplete applications will be returned and any paid fees are nonrefundable. To check the status of a permit, email permits@cityofkennedale.com and include the property address and permit type.

□ Completed and signed application form

□ Contractors registered with Kennedale – email permits@cityofkennedale.com to check status

Digital submission of all required plans, as well as three printed labeled sets of required plans. See attached sheet for detailed information regarding required plans.

Project Information

Property Address:

Building/Suite/Unit Numbers:

HVAC Unit(s):

Square footage:

Total Impervious Area (includes existing and proposed construction):

Type of construction: □ New construction □ Addition □ Remodel

Describe work to be done in detail (scope of work):

Applicant Information

(Serves as primary contact for this permit)

Applicant Name:

Applicant Title:

Applicant Address:

Applicant Phone:

Applicant Email:

Property Owner Information

Owner Name:

Owner Address:

Owner Phone:

Owner Email:

(2)

General Contractor/Builder Information

Name:

Address:

Phone:

Email:

Mechanical Contractor Information

Name:

Address:

Phone:

Email:

Electrical Contractor Information

Name:

Address:

Phone:

Email:

Plumbing Contractor Information

Name:

Address:

Phone:

Email:

Applicant Agreement

By signing below, I acknowledge that I have read and completed all applicable requirements. I understand that if I have submitted an incomplete or false application, my application may be rejected and that the fee is nonrefundable.

(3)

For Office Use Only

Completeness Check

Application form completely filled and signed? □ Yes □ No

Attached plans? □ Yes □ No

Contractors registered? □ Yes □ No

Fee paid? □ Yes □ No

Sign Date

Planning and Zoning Review Property zoning:

Is the property platted? □ Yes □ No

Are all required plans included? □ Yes □ No Construction meets spatial standards per zoning? □ Yes □ No Will property meet allowable lot coverage? □ Yes □ No Is proposed structure in any easements? □ Yes □ No Is proposed structure in a floodzone? □ Yes □ No

(4)

Residential Building Permit

Plan Submittal Checklist

Public Works Department

Plan Requirements

Email Director of Public Works Larry Hoover atlhoover@cityofkennedale.comfor questions or clarification regarding public works plan requirements.

 SWPPP required for additions, new construction.

 Drive approach plans must comply with City of Kennedale Public Works Design Manual.  Water/sewer service application must be completed for new service.

Planning/Building Department

Plan Requirements

Please note that City of Kennedale has adopted ICC 2018 building codes. Email Plans Examiner Carl Partin at cpartin@safebuilt.comfor questions or clarification regarding building plan requirements. Email

permits@cityofkennedale.comfor general permit application questions. Site Plan

 Drawn to scale

 Drainage directions, with arrows  Easements

 Driveway location

 Location of all structures on site, including accessory buildings, fences, sidewalks, retaining walls, etc.  Distances from other structures and property lines

 Legal lot description and address Energy Plans

2018 IECC Energy Code Compliance Projects shall comply with one of the following: Prescriptive Approach

 Glazing = U-Factor 0.35 or less

 Solar Heat Gain Coefficient = SHGC 0.25 of less  Attic Insulation = R-value 38 or greater

(5)

Foundation Plans

Engineered slab/foundation layout

Engineered foundation letter identifying the applicable building code (IRC) and soil conditions Floor Plans

 Drawn to scale  Dimensions

Door and window sizes and locations Label all rooms

Elevation plans

 All sides of home  Roofing materials Roof pitch

Overhangs, including depth Roof, Ceiling & Floor Framing Plans

 Rafter, joist beams and header sizes, spacing and spans Wind Bracing Plans

Braced wall panel types and locations Hardware specifications

(6)

APPLICATION

WATER UTILITIES ACCOUNT

Property Address: ______________________________________ Permit # ______________________________________________ Billing Information:

Name for Water Account Billing (personal or business)*: _________________________________ Tax-ID (SSN & DL if under personal name): ______________________________________________ Billing address: _____________________________________________________________________ City: _____________________________ State: _________________ Zip Code: _________________ Home Phone #: (____) _______ Fax #: (____) ________ Email: _____________________________ *A legible copy of a current government photo ID is required to be submitted for the business owner. Contact Information:

Construction Project Manager Name: ____________________________________________________ Phone #: (_____) ______________ Email: ______________________________________________

Water Meters

Is the property Residential or Commercial? (Circle one): Residential/Commercial

If Residential, proceed to listing meters and sizes needed for the residential address below. If Commercial, proceed to the Water & Sewer Taps section of this application.

Number of Meters Needed Sizes of Meters Needed

(7)

*The meter will be replacing the meter that comes with the Double Check Detector Assembly that the contractor has supplied.

Water & Sewer Taps

Have the tap(s) already been made? Yes No (If yes, do not proceed)

If no, is an Approved Utility Contractor making the tap(s)? Yes No (If yes, do not proceed)

If no, is the City making the tap(s)? Yes No

(If yes, please specify in the table below and review the Important Information)

Number of Tap(s) Needed Sizes of Tap(s) Needed Water Taps

Sewer Taps

Important Information:

 Water and Sewer Taps are charged based on actual cost of the tap installation per job site. Based on the size and number of tap(s) needed, a preliminary quote will be provided.

 The Construction Project Manager on this application will be provided the preliminary quote.

 If the preliminary quote is accepted, the Construction Project Manager will be required to mark the desired location for the water and/or sewer tap(s).

 Once the desired location is marked, please call the Customer Assistant Representative at 817-459-6803 to notify us that this has been completed.

 The Water Utility Field Operations will conduct an on-site review of the job request in order to calculate the estimated cost for the specific job site.

 The estimated tap(s) cost and all other applicable water and sewer fees are required to be paid prior to permits being issued.

 When the tap(s) are completed, the water utility account will be adjusted accordingly based on the actual cost per job.

(8)

City of Kennedale

Permit Application Guide

1. Visit cityofkennedale.com/permitapplications to download applications.

2. Review the list of requirements at the top of the application. Gather all required documents and

plans to include with your application.

Tip: Nearly every application requires a registered contractor. It is best to take care of registration BEFORE submitting your permit application.

3. Fill out the application completely. Please ensure no required items are left blank or missing.

4. Email completed application and all required plans and documents to

permits@cityofkennedale.com

.

Tip: Send these documents all together in one email to help ensure no documents or plans are missed which may delay your plan review.

5. The applicant will receive instructions on completing payment via email. Once payment is

completed, plan review will begin the following full business day.

6. The applicant will receive plan review comments and any follow-up from staff via email. Any

subsequent plan review will begin the full business day following receipt of revisions.

7. Approved plans and permit will be emailed to applicant and general contractor. You may begin

work as soon as you receive these items. Be sure to have your permit and approved plans

available on site during all construction and inspections.

8. When ready for inspections, visit cityofkennedale.com/InspectionRequest and fill out the form.

Next business day inspections are currently only available if requested before noon the prior

business day.

Plan Review Turnaround Times

Project Type First Plan Review Subsequent Reviews

Small Residential Projects* 5 business days 5 business days Residential Projects 10 business days 5 business days Multi-family Projects 10 business days 5 business days Commercial Projects 10 business days 5 business days

(9)

Site plans display a top-down aerial view of a property and are used to show the placement of existing

and proposed structures, fences, pools, etc. A site plan is required for most permit applications because

staff must ensure your project can safely, legally be placed where you plan to build it. If you have never

created a site plan before, follow this guide to make your own.

1. Obtain a copy of your survey. If you do not have a survey, you can either take a screenshot of

your property using Google Maps Satellite view or you can hand draw a site plan to scale.

2. Draw the boundaries of the entire property (please be sure to outline the property if you are

using a Google Maps screenshot). Label the dimensions of the property lines.

3. Draw and label all existing and proposed structures (house, sheds, pools, etc). Label dimensions

on all existing and proposed structures. (For fences, use a red line with Xs: x—x—x—x—x)

4. Label the setbacks (distance from property lines and any surrounding structures) of the proposed

structure.

5. Label adjacent streets and any easements. Add a compass to indicate direction.

EXAMPLE SITE PLAN

References

Related documents

When Suffolk County Health Department approval is required, No Certificate of Occupancy or Certificate of.. Compliance will be issued without an

Two (2) sets of site specific wind load calculations of the opening signed and sealed by the design engineer or architect.. Approved by architect for compliance with the

The Energy Efficiency Design Summary form summarizes the compliance path used by a house designer to comply with energy efficiency requirements of the Ontario Building Code. This

Further, the new Permit Holder or company owner(s) must provide the security deposit specified in the Authority’s Ground Transportation Rules and Regulations to the

This software integrates seamlessly with Microsoft SQL Server to protect encryption keys in the Townsend Security Alliance Key Manager for VMware solution. Whether

(Types shall be indicated on plan or in specifications or both). Buildings over 2 stories in height require a Wyoming engineer's stamp or as determined by the Building Official..

 Using specialist computer software to help keep the project on course  Monitoring the progress of the project at different stages of its development  Making sure the

1) Submit a completed Application for Construction or Use (Permit Application). 2) If application is submitted by someone other than the property owner, signed authorization by