Contents1 Main terms 1.1 Nāda 1.1.1 Anahata Nāda 1.1.2 Ahata Nāda 1.2 Śruti 1.3 Sthayi 1.4 Swaram 1.5 Rāgam 1.6 Ārōhanam 1.7 Avarōhanam 1.8 Melakartā 1.9 Asampūrna Melakartā 1.10 Chakra 1.11 Janya 1.12 Tālam 1.13 Ālāpana 1.14 Niraval 1.15 Kalpanaswaram 1.16 Tānam 1.17 Rāgamālika 1.18 Rāgam Tānam Pallavi 1.19 Viruttam 1.20 Manōdharma 1.21 Kalpita sangeetam 2 Swarams 2.1 Shadjam 2.2 Rishabham 2.3 Gāndhāram 2.4 Madhyamam 2.5 Panchamam 2.6 Dhaivatam 2.7 Nishādham 2.8 Anya swaram
Glossary of Carnatic musicFrom Wikipedia, the free encyclopedia Carnatic music terms are briefly described in this page. Major terms have their own separate article pages, while minor terms are defined / described here. Most of the keerthanas/kritis used in Carnatic music is based on Telugu language. The order of terms is from basic to related terms, rather than alphabetic.
NādaNāda refers to music or musical sound. It also refers to the tone of a musical instrument. Anahata Nāda Anāhata Nāda refers to the naturally occurring sounds (literally not struck). Ahata Nāda Ahata Nāda refers to generated sounds or sounds made by efforts of man (literally struck).
ŚrutiŚruti is musical pitch. It is considered equivalent to tonic of western music. This is the pitch at which the drone is set, which is usually played by a tambura.
SthayiIn Carnatic music, Sthayi refers to the octave, especially in the Telugu language. Madhyama sthayi refers to the middle octave, Tara sthayi refers to the upper octave and Mandra sthayi refers to the lower octave. 
SwaramSwaram or Swara is a single note. Each swaram defines the position of note in relation to the Śruti.
RāgamA rāgam prescribes a set of rules for building a melody very similar to the Western concept of mode. Different combination of swarams and swaram phrases form different rāgams.
ĀrōhanamĀrōhanam of a rāgam is the ascending scale of the rāgam. It describes the rules for singing ascending notes of a rāgam, including the swarams to use and swaram patterns that form the rāgam.
AvarōhanamAvarōhanam of a rāgam is the descending scale of the rāgam. It describes the rules for singing descending notes of a rāgam.
MelakartāA Melakartā rāgam is one which has all seven swarams, namely, Sa, Ri, Ga, Ma, Pa, Dha and Ni (sampoorna rāgam). The ārōhanam and avarōhanam of a melakartā ragam are strictly ascending and descending scales. It is also known as janaka rāgam (parent rāgam), because other rāgams are derived from it.
Asampūrna MelakartāOne of the 72 parent rāgams first created by Venkatamakhin which did not have strict rules of ascending / descending scales, did not insist on inclusion of all 7 swaras nor disallow vakra prayogas (zig zag notes in scale).
ChakraA chakra consists of a group of 6 Melakartā rāgams, which differ from each other only in the Dhaivatham and Nishadham.
2.9 Sthāi 2.10 Anga 2.11 Gamaka 2.12 Vādi 2.13 Samvādi 2.14 Vivādi 2.15 Anuvādi 3 Janya rāgams 3.1 Prayōgam 3.2 Vishesha Prayōgam 3.3 Varjya 3.4 Vakram 3.5 Upānga 3.6 Bhāshānga 3.7 Nishādhāntya 3.8 Dhaivatāntya 3.9 Panchamāntya 3.10 Madhyama sruti 4 Swaram counts 4.1 Sampūrna rāgam 4.2 Shādava rāgam 4.3 Owdava rāgam 4.4 Svarantara rāgam 5 Tālam components 5.1 Jathi 5.2 Gati 5.3 Laghu 5.4 Dhrutham 5.5 Anudhrutham 5.6 Āvartanam 5.7 Eduppu 6 Tālams 6.1 Rūpaka tālam 6.2 Triputa tālam 6.3 Dhruva tālam 6.4 Matya tālam 6.5 Jhampa tālam 6.6 Ata tālam 6.7 Eka tālam 6.8 Ādhi tālam
JanyaA Janya rāgam is one which is derived from a Melakartā rāgam. It may have (a) a subset of the seven swarams Sa, Ri, Ga, Ma, Pa, Dha and Ni (varjya rāgam), (b) an external swaram (anya swaram) not found in its parent or (c) vakra prayōgam of swarams in Ārōhanam or Avarōhanam (zigzag sequence of notes, instead of strictly ascending or descending scales).
TālamTālam refers to the rhythm cycle or beat cycle for a particular song.
ĀlāpanaĀlāpana is a preface to a song, which explores the rāgam of the song, without any lyrics. It is a slow improvisation with no tālam (rhythm).
NiravalNiraval or Neraval is the repeated singing of one or two lines of a song, with improvised exposition in each repetition.
KalpanaswaramKalpanaswaram literally means imagined swarams. It is the singing of swarams of the rāgam of a song, following the completion of the song. Though many phrases of the swarams may have been practiced, experienced artists may spontaneously play new phrases within the rāgam's rules hence the term Kalpana. It is an improvisation of the rāgam, by singing the swarams, namely Sa, Ri, Ga, Ma, Pa, Dha and Ni.
TānamTānam is rhythmic / rhythm based improvisation of the rāgam. It is done with rhythm based syllables like tha, nam, thom and na. It is usually included as second part in a Rāgam Tānam Pallavi.
RāgamālikaRāgamālika, which literally means garland of rāgams, is a composition that has different verses set to different rāgams. Rāgamālika swarams refers to singing of Kalpanaswarams in different rāgams.
Rāgam Tānam PallaviRāgam Tānam Pallavi is a rendition of Carnatic music which lends to total improvisation, in different forms. It consists of Rāgam Ālāpana (rāgam), Tānam and a Pallavi line. The pallavi line is sung many times in different speeds, different ranges of the rāgam and different octaves. This is usually followed by Kalpanaswarams, sometimes in multiple rāgams (rāgamālika).
ViruttamViruttam is a devotional verse or phrase sung (without talam) in an impromptu choice of rāgam or rāgamālika usually before a song. The rāgam (or last rāgam in case of rāgamālika) is usually the same as that of the song that follows.
ManōdharmaManōdharma is the concept of impromptu or spontaneous improvisation, which is one of the important aspects of Carnatic music. There are many types of improvisations, like Rāgam Ālāpana, Thānam, Niraval, Viruttam and Kalpanaswaram.
Kalpita sangeetamKalpita sangeetam is music that is already composed, learnt and practiced. It is opposite of Manodharma sangeetam, which complements Kalpita sangeetam.
SwaramsThe seven swarams in Carnatic music, then followed by other terms related to swaram.
ShadjamThe first swaram in the scale is Shadjam (Sa). It is invariant and is always included in all ragams.
6.9 Khanda chāpu tālam 6.10 Misra chāpu tālam 6.11 Desādhi tālam 7 Kala 8 Learning exercises 8.1 Sarali varisai 8.2 Swarāvali 8.3 Janta varisai 8.4 Dhāttu varisai 8.5 Alankāra 9 Types of composition 9.1 Geetham 9.2 Swarajati 9.3 Varnam 9.4 Keerthanam 9.5 Kriti 9.6 Thillana 10 Parts of a composition 10.1 Pallavi 10.2 Anupallavi 10.3 Charanam 10.4 Chittaswaram 10.5 Muktāyi swaram 11 Other 11.1 Tani avartanam 11.2 Tukkada 11.3 Avadhana Pallavi 12 References 13 External links The second swaram in the scale is Rishabham (Ri). It has three pitch possibilities, namely Suddha, Chathusruti and Shatsruti.
GāndhāramThe third swaram in the scale is Gāndhāram (Ga). It has three pitch possibilities, namely Suddha, Sādhārana and Antara.
MadhyamamThe fourth swaram in the scale is Madhyamam (Ma). It has two pitch possibilities, namely Suddha and Prati.
PanchamamThe fifth swaram in the scale is Panchamam (Pa). It is invariant.
DhaivatamThe sixth swaram in the scale is Dhaivatam (Dha). It has three pitch possibilities, namely Suddha, Chathusruti and Shatsruti.
NishādhamThe seventh swaram in the scale is Nishādham (Ni). It has three pitch possibilities, namely Suddha, Kaisiki and Kākali.
Anya swaramAnya swaram in a janya rāgam is a swaram that is not found in its parent rāgam (melakartā rāgam). Anya means outside the set/ group.
SthāiSthāi refers to an octave of music. There are 5 sthāis in Carnatic music, namely, Anumandra (lowest), Mandra (literally means chant, which means lower), Madhya (literally means middle), Tara (means higher) and Athitara (meaning very high). Most artists sing over two octaves or two and a half octaves range (within Mandra, Madhya and Tara sthais). Very few can sing well in bigger range of 3 or more octaves.
AngaAnga means part. In the context of a rāgam's scale, the terms poorvanga (meaning former part, in this case firsthalf) and uttaranga (latter part, or secondhalf) are used. Sa, Ri, Ga and Ma notes in a scale are referred are poorvanga, while Pa, Dha and Ni are referred as uttaranga
GamakaGamaka is the term used for variations of the swarams in a scale. It can refer to the shake of the note, grace around the note, decoration or embellishment of the swaram. It is an integral part of most rāgams, as it is not arbitrary but is essential part of the structure/ scale.
VādiVādi swaram in a rāgam is the main/ primary swaram of importance in it. A vādi swaram is repeated quite often in a rendition.
SamvādiSamvādi swaram in a rāgam has a concordant effect with the vādi swaram. It has a good effect to the ear (melody or pleasing) along with the vādi. In western music it is equivalent of the consonant.
VivādiVivādi swaram in a rāgam has a discordant effect with the vādi swaram in it. It may not have a pleasing effect when sounded together, but composers use appropriate phrases so that such discordant effect is skipped or avoided. In western music it is equivalent of the dissonant.
AnuvādiAnuvādi swaram in a rāgam has neither concordant nor discordant effect with the vādi swaram.
A musical notes phrase of a rāgam (series of swarams sung in a particular rāgam) is known as Prayōgam.
Vishesha PrayōgamVishesha means special. Hence, important phrases of a rāgam are known as Vishesha Prayōgams.
VarjyaMissing swarams in a janya rāgam, when derived from a melakartā rāgam are referred as varjya. For example, Rishabham and Panchamam are varjya in Hindolam when derived from Natabhairavi.
VakramSwarams are said to be vakram in a rāgam, if either the Ārōhanam, Avarōhanam or both, do not follow a strictly ascending or descending order. They go up and down (example, 2 steps forward one step back). In such a rāgam, these swarams should always use the same order in order to give the unique melody of the rāgam.
UpāngaA janya rāgam is Upānga if all the swarams in its scale are strictly derived from its melakartā rāgam (parent). There are no anya swarams (external swarams).
BhāshāngaA janya rāgam is Bhāshānga if an anya swaram is introduced in its scale, when derived from its melakartā rāgam (parent).
NishādhāntyaA janya rāgam is Nishādhāntya if the highest note that can be played is the Nishādham. The rules for such rāgams are that they should be played or sung within the single octave Ni, Sa, Ri, Ga, Ma, Pa, Dha, Ni. Examples are Nadanamakriya and Punnāgavarāli rāgams.
DhaivatāntyaA janya rāgam is Dhaivadhāntya if the highest note that can be played is the Dhaivatam. The rules for such rāgams are that they should be played or sung within the single octave Dha, Ni, Sa, Ri, Ga, Ma, Pa, Dha. Example Kurinji rāgam.
PanchamāntyaA janya rāgam is Panchamāntya if the highest note that can be played is the Panchamam. The rules for such rāgams are that they should be played or sung within the single octave Pa, Dha, Ni, Sa, Ri, Ga, Ma, Pa. Example Navroj rāgam.
Madhyama srutiTuning the sruti (tonic note) to Ma (and also changing Pa string of Tambura to Ma) is called Madhyama sruti. It is usually set for Panchamāntya, Dhaivadhāntya and Nishādhāntya rāgams.
Swaram countsThe following terms are applicable to ascending scale (ārōhanam) of a rāgam, descending scale (avarōhanam) of a rāgam, or the rāgam as a whole.
Sampūrna rāgamSampurna rāgam is a rāgam that has all seven swarams, namely, Sa, Ri, Ga, Ma, Pa, Dha and Ni.
Shādava rāgamShādava rāgam is a rāgam that has only six of the seven swarams in its scale.
Owdava rāgamOwdava rāgam is a rāgam that has only five of the seven swarams in its scale. It is a pentatonic scale.
Svarantara rāgamSvarantara rāgam is a rāgam that has only four of the seven swarams in its scale.
JathiJathi of a tālam specifies beat count of the rhythm cycle. It specifically applies to lagu component(s) of the tālam and not necessarily to the entire tālam. The different jathis are tisra (three beats in lagu), chathusra (four), khanda (five), misra (seven) and sankeerna (nine).
GatiGati of a tālam specifies subdivisions of a beat in a composition. It is also referred as Nadai. Chathusra gati is the most common (four), followed by Tisra (three). Others are Khanda, Misra and Sankeerna.
LaghuLaghu is the component of a tālam which is the variant part. Its beat count is dependent on the jāti of the tālam. The action for counting includes a tap / clap, followed by a count of subbeats of the full rhythm cycle. Note that a tisra jāti laghu is actually 1 clap and 2 counts = 3 beats.
DhruthamDhrutham is the component of a tālam which is invariant and includes only two beats. Its action includes a tap / clap, followed by a veechu (wave).
AnudhruthamAnudhrutham is the component of a tālam which is invariant and includes only one beat. Its action is a tap / clap.
ĀvartanamĀvartanam of a tālam refers to one cycle of the tālam. Most tālams have at least 1 lagu, except for the rare tālams (see tālam page).
EduppuEduppu, from Tamil, means start. Eduppu denotes the point within the Āvartanam of a tālam when a composition or stanza in a composition begins. Onru (one beat later, meaning second beat), Onrarai (one and half beat later, meaning between 2nd and 3rd beat) are common, other than Samam (meaning equal) which starts in synchronization with the beginning of a tālam.
Rūpaka tālamRūpaka tālam refers to the group of tālams that consist of 1 dhrutam, followed by 1 lagu. Rūpaka tālam also refers to chathusrajathi rūpaka tālam as a default (2 + 4 = 6 beats in an āvartanam).
Triputa tālamTriputa tālam refers to the group of tālams that consist of 1 lagu, followed by 2 dhrutams. Triputa tālam also refers to tisrajathi triputa tālam as a default (3 + 2 + 2 = 7 beats in an āvartanam).
Dhruva tālamDhruva tālam refers to the group of tālams that consist of 1 lagu, followed by 1 dhrutam, followed by two lagus. Dhruva tālam also refers to chathusrajathi dhruva tālam as a default (4 + 2 + 4 + 4 = 14 beats in an āvartanam), unless a different jathi is specified.
Matya tālamMatya tālam refers to the group of tālams that consist of 1 lagu, followed by 1 dhrutam, followed by 1 lagu. Matya tālam also refers to chathusrajathi matya tālam as a default (4 + 2 + 4 = 10 beats in an āvartanam).
Jhampa tālamJhampa tālam refers to the group of tālams that consist of 1 lagu, followed by 1 anudhrutam, followed by 1 dhrutam. Jhampa tālam also refers to misrajathi jhampa tālam as a default (7 + 1 + 2 = 10 beats in an āvartanam).
Ata tālamAta tālam refers to the group of tālams that consist of 2 lagus, followed by 2 dhrutams. Ata tālam also refers to khandajathi ata tālam as a default (5 + 5 + 2 + 2 = 14 beats in an āvartanam).
Eka tālamEka tālam refers to the group of tālams that consist of 1 lagu only. Eka tālam also refers to chathusrajathi eka tālam as a default (4 beats in an āvartanam).
Ādhi tālamĀdhi tālam refers to chathusrajathi triputa tālam (4 + 2 + 2 = 8 beats in an āvartanam), which is very common in Carnatic music. This is the equivalent of 8 beat / 16 beat of Western music.
Khanda chāpu tālam
Khanda chāpu refers to a tālam with 10 beat āvartanam (Khanda literally means 5) which does not fit into above classification of tālams.
Misra chāpu tālamMisra chāpu refers to a tālam with 14 beat āvartanam (Misra literally means 7) which does not fit into above classification of tālams.
Desādhi tālamDesādhi refers to ādhi tālam with (8 beat āvartanam), where the eduppu is one and a half beats from beginning of āvaratanam (onrarai).
KalaKala refers to the speed of the tālam during a rendition of song.
Learning exercisesLearning Carnatic music involves learning most of the following exercises, mostly in the order listed below.
Sarali varisaiSarali varisai is used to learn the swarams in the octave, usually in Māyāmālavagowla ragam. It is learnt in simple straight ascending and descending fashion and a few variations. It is also learnt in multiple speeds (kalams).
SwarāvaliAvali means row or arrangement. Swarāvali are exercises with different arrangements of swarams. It is shortened and referred as Sarali, as in Sarali varisai described above.
Janta varisaiJanta varisai are exercises used to learn the swarams in the octave in twin fashion (sa sa ri ri ga ga and so on) and a few other combinations. It is also usually learnt in Māyāmālavagowla rāgam.
Dhāttu varisaiDhāttu literally means jump. Dhāttu varisai are exercises used to learn the swarams in zigzag fashion, so that more control of the notes and different combinations are achieved. Example, sa ma ri ga, sa ri ga ma, and so on. Each of these exercises are set to different tālams, so that different rhythm aspects are learnt.
AlankāraAlankāra means decoration. These exercises are groups or patterns of swarams, each of which are set to seven main tālams, so that rhythm aspect is also learnt together with different rāgams.
Types of composition
GeethamGeetham means song or melody. Geethams are the first songs that are learnt. They are very short and are the first exercises where singing lyrics along with their swaram patterns are learnt.
SwarajatiSwarajati lead to learning bigger songs / compositions after learning Geethams. They are set to different rāgams and lead towards learning varnams and kritis.
VarnamVarnam is a type of composition which is suited for vocal exercises of a wide variety of Carnatic music aspects, including slow and fast tempo of singing, both lyrics and swarams. It is the most complex of vocal exercises. In modern carnatic concerts, it is usually sung as a first song and is supposed to help warmup.
KeerthanamKeerthanam or Kriti is the category of most compositions in Carnatic music. A concert consists mainly of Keerthanams with zero or one of Varnam, Rāgam Thānam Pallavi and Thillānā included in appropriate order.
KritiFor Kriti, see Keerthanam above.
Thillānā is a composition consisting of rhythm syllables, like Dheem, thom, tarana and thaani in first two stanzas, followed by a one or two line lyric. In instrumental performances, it is a melodic rhythmic piece.
Parts of a composition
PallaviPallavi is the first verse in a composition, especially varanams,Keerthanams or Kritis.
AnupallaviAnupallavi is an optional verse that follows the pallavi in a composition, especially keerthanams or kritis.
CharanamCharanams are the verse(s) that follow the pallavi or anupallavi (if present).
ChittaswaramChittaswarams are set swaram phrases (solfa passages), in a composition, usually a kriti, appended to enrich its beauty. It is sung at the end of the anupallavi and charanam.
Muktāyi swaramMuktāyi swarams are the swaram phrases (solfa passage) that occur after the anupallavi in tāna varnams and which serves as the concluding part of the pūrvanga (first part). This is more related to the songs for dance performances, like Bharatanatyam.
Tani avartanamTani avartanam refers to the extended solo that is played by the percussionists in a concert.
TukkadaTukkadas are compositions played towards the end of Carnatic concerts.
Avadhana PallaviAvadhana Pallavi is a classical form of performing a composition set to two different talas.
References1. Prof. P Sambamoorthy (2005), South Indian Music Vol I, Chennai, India: The Indian Music Publishing House, p. 5162 2. http://chinmayaswaranjali.org/music_lesson_06.htm 1. A practical course in Carnatic music by Prof. P. Sambamurthy, 15th edition published 1998, The Indian Music publishing house 2. Ragas in Carnatic music by Dr. S. Bhagyalekshmy, Pub. 1990, CBH Publications 3. Raganidhi by P. Subba Rao, Pub. 1964, The Music Academy of Madras 4. South Indian music, Books I, II and III, by Prof. P. Sambamurthy, 18th edition published 2005, The Indian Music publishing house
External linksOnline dictionary within Carnatic music handbook from carnatica.net (http://carnatica.net/onlinedictionary/onlinemain.htm) Dictionary of some South Indian Musical terms (http://www.saigan.com/heritage/music/terms.htm) Retrieved from "https://en.wikipedia.org/w/index.php?title=Glossary_of_Carnatic_music&oldid=682208508" Categories: Carnatic music terminology Glossaries of music
This page was last modified on 22 September 2015, at 07:17.