For Users of Microsoft
with a Windows
Fuji Xerox Information Systems Co.,Ltd. 21, September, 2012
For Users of Microsoft® Internet Explorer8
with a Windows® Vista
Fuji Xerox Information Systems Co.,Ltd.
改訂履歴
Revision Date of
revision Description of revision
First 21, Sep, 2012 First Edition.
2.0 25, Sep, 2014 General ： This Document in a New Format .
pg. 1-2
< Preface >
Thank you for using the FRAP
The mechanism of certificate management used for
Windows® Vista has been changed from that of earlier
Windows® consequently, you might encounter problems when
you acquire or renew certificates with Windows® Vista.
This document provides information on the operations that are
necessary to acquire or renew certificates in a Windows® Vista
environment with Internet Explorer8 (IE8) installed.
< TOC >
< TOC > ... 1-3
1 < Preparation Before Acquiring or Renewing Certificates > ... 1-4 1.1 < Confirm the ActiveX® control setting > ... 1-5
< setting procedure > ... 1-5
1.2 < Setting of the security level > ... 1-7
< setting procedure > ... 1-7
1.3 < Registration for“Trusted sites”> ... 1-8
< Registration procedure > ... 1-8
1.4 < Operations to acquire and renew certificates > ... 1-10
< Acquiring or renewing procedure > ... 1-10
1.5 < Appendix > ... 1-13
< Confirm the TLS-option setting > ... 1-13
1
< Preparation Before Acquiring or
Renewing Certificates >
1.1
< Confirm the ActiveX® control setting >
< setting procedure >
To begin with, confirm the ActiveX® control setting by the following procedure.
（1） Open your web browser
（2） Select [Tools]-[Manage Add-ons]-[Enable or Disable Add-ons] The “Manage Add-ons” dialog box is displayed (Figure 1).
<Figure 1> Manage Add-ons （3） In the “Manage Add-ons” dialog box,
If the add-on ”X509 Enrollment Web Class Factory” is displayed.
>
Click and select the add-on named “X509 Enrollment Web Class Factory.”(1)>
Select “Enable” under” Settings if “Disable” is selected. “(2)*When “Enable” has already been selected, there is no need to operate it.
>
Click “OK” and close the dialog box. (3)If the add-on “X509 Enrollment Web Class Factory” is not displayed, there is no need to operation on this section.
pg. 1-6
Click “OK” and close the dialog box.
<Figure 2> Manage Add-ons （4） Close the all browser windows.
1.2
< Setting of the security level >
< setting procedure >
Set up the security level and register FRAP Certificate Issuing Service Site to the“Trusted sites” in Internet Explorer 7.
Please proceed with the procedures below.
（1） Open Internet Explorer 7, and select [Tools] > [Internet Options]. (Figure 3)
（2） Select the [Security] tab from the displayed [Internet Options] dialog box (1)
（3） Select [Trusted sites] under the [Security] tab (2)
（4） If [Medium] is not displayed under the [Security Level for the zone], move the slide-bar with your mouse to set the security level to [Medium] (3)
<Figure 3> ‘Internet Options’ dialog box This is end of setting about the security level.
pg. 1-8
1.3
< Registration for“Trusted sites”>
< Registration procedure >
The steps for registering FRAP Certificate Issuing Service Site to the “Trusted sites” in Internet Explorer 7.
Please proceed with the procedures below.
（1） Open Internet Explorer 7, and select [Tools] > [Internet Options]. (Figure 3)
（2） Select the [Security] tab from the displayed [Internet Options] dialog box (1)
（3） Select [Trusted sites] under the [Security] tab (2)
（4）Click the [Sites] button (4). The ‘Trusted sites’ windows will open. (Figure 4)
<Figure 4> ‘Internet Options’ dialog box
the zone:] in the [Trusted sites] windows － (1), and click [Add]－(2) (Figure 5)
Enter https address : https:// frap-isssys.fujixerox.co.jp
<Figure 5> Entry to Trusted sites
（6） Upon confirming that the above URL is displayed under the [Websites:], close the [Trusted sites] window and click [OK] at the [Internet options] dialog box.
This is end of setting about Registration for “Trusted sites”.
Please click the URL stated in the message entitled [Request to acquire certificate] and
proceed with the acquiring or renewing procedures of the certificate.
If you attempt to a quire certificates using Internet Explorer 8 on Windows® Vista without first performing the preparation procedures,
an error message may appear as shown in Figure 6. If this appears,
certificates cannot be acquired, even if you attempt to re-do the procedures. In such case, please ask an administrator to re-issue the certificate.
<Figure 6> VBScript Error Screen
pg. 1-10
1.4
< Operations to acquire and renew
certificates >
< Acquiring or renewing procedure >
Acquire and renew certificates by following the procedure below.
（1） After you click on the URL provided in the e-mail entitled “Acquiring certificates, “the Information Bar “dialog box might be displayed according to setting of your personal computer (Figure 6)
In this case, please click “Close” button, and advance the operation according to the procedure that guides as below.
When “Issuing a User Certificate” or “Renewing User Certificate” screen is displayed without displaying “Information Bar” dialog, there is no need to operate as following below.
Please advance the operation of acquire or renew certificate according to the instruction of the screen.
<Figure 6> “Information Bar” dialog box
（2） Click the “information Bar,” and select “Execute ActiveX Control.” (Figure 7)
<Figure 7> When the “Information Bar” is displayed （3） Click “Run” in the “Security Warning” dialog box (Figure 8)
pg. 1-12
（4） The operations related to ActiveX® control are now complete. The screen for performing operations to acquire and renew certificate is displayed.
Follow the instructions on the screen (Figure 9)
<Figure 9> FRAP screen
1.5
< Appendix >
< Confirm the TLS-option setting >
Confirm the TLS-option setting by the following procedure.
（1） Open Internet Explorer 8, and select [Tools] > [Internet Options].
（2） Select the [Advanced] tab from the displayed [Internet Options] dialog box .
（3） To enable TLS in Internet Explorer, check the "Use TLS X.X" box on the [Advanced] tab
If the "Use TLS X.X" box is checked , there is no need to operation on this section.
pg. 1-14
For Users of MicrosoftR Internet Explorer8 with a Windows® Vista
21, September, 2012 ：1st version issued
※No part of this document may be reproduced or transmitted in any means, electric, mechanical, photocopying, without the prior written permission from the publisher.
■Trademarks
Microsoft, Windows, Internet Explorer, ActiveX are Microsoft Corporation’s trademark in the United States and/or other countries.
Microsoft product screen shots reprinted with permission from Microsoft Corporation. All brand names and product names are trademarks or registered trademarks of their respective companies.
