AlarmSecur
com
®2
Advanced settings
Content
Online Settings Enter online settings Status > System Status > Network Status > Service Status > Network Settings > Ethernet Settings > WIFI settings Settings > NTP Settings > Service Settings > Alarm Settings > Accessory Settings > Alarmplan Settings > 4G Admin > User Admin > Upgrade Admin > Log
Camera > Real Time Video Camera > Audio and Video Camera > PTZ
Record > Manage Record Record > Record Configuration Cloud Alarm > Cloud Storage Cloud Alarm > Local Configuration CMS Settings
Overview > Buttons on the right Overview > Buttons down on the left Overview > Buttons down on the right Camera Local
Settings > Snapshot Settings Settings > Record Settings Settings > Warning Settings Settings > Video Window Display Settings > Service IP Configure Settings > P2P Service Configure Settings > Other Settings
External Camera > Login External Camera > Alias Setting External Camera > Extra Users
Camera Settings Enter Camera settings
Camera Settings > Media Settings Camera Settings > Time Settings Camera Settings > 3G Connection Camera Settings > WIFI
Camera Settings > Ethernet
Camera Settings > Service Configure Camera Settings > Alarm Configure Camera Settings > Record Configure Camera Settings > Admin Password Camera Settings > PTZ Settings Camera Settings > Network Status
APP Settings Login
Login > Magnifying Login > Star
Login > System Settings Overview
Cameraview
Cameraview > Controls
Cameraview > Controls > Recordings Cameraview > Controls > Settings Page 2 3 3 5 6 7 8 9 10 11 13 16 17 18 19 20 21 22 23 24 25 26 27 Page 40 41 42 43 44 44 45 45 46 46 47 48 49 50 Page 28 29 30 31 32 33 34 35 36 37 38 39 Page 51 51 52 53 55 55 56 57 58
Warning and Precautions
1. Don’t move the SIM card when power is on, or it will damage the device.
2. Use the power adaptor provided.
- Open the CMS manager on your computer
- Enter the IP address in your browser (listed in the list local), or use the right mouse button to go to: Open camera webpage
Online Settings
4
Advanced settings
Status > System
Advanced settings
Status > Network
6
Advanced settings
Status > Service
Advanced settings
Status > Network
8
Advanced settings
Status > Service
Advanced settings
Status > Network
10
Advanced settings
Status > Ethernet
Advanced settings
Setting > WIFI settings
- Tick the box of EnableWIFI - Click Change, Save EnableWIFI - Click ViewWireless Networks
- Wait for 10 seconds. Click Active AP List, choose the network from the drop list. - If your wireless AP requires a password, put in the password in the Key box. - Click Change to save settings
- Click Status > Network to check status.
12
Advanced settings
Setting > NTP
- Click enable NTP
- Click Synchronize PC Time - Change time zone to correct one
o CET (Amsterdam) wintertime GMT+1 o CET (Amsterdam) summertime GMT+2
o For more timezone go to wwp.greenwichmeantime.com - Click change to save settings
Advanced settings
Setting > Service
Shows server status and camera ID.
If you have multiple cameras you can add them under one account.
- Change the ID number of Related Main Device ID number (CNxxxxxxx) to the Device ID number of your Main device.
14
Advanced settings
Setting > Alarm
Here you can change the settings of your alarmsystem
Alarm Source Setting
- Wireless detector are activated (enable) or deactivated (disable)
- Motion detector (Camera) are activated (enable) or deactivated (disable) - Select the level of motion detection
o Low sensitiveness (recommended) o Normal
o High sensitiveness - Select the armed mode
o Enable all alarm o Stay
o Away
o Emergency AlarmWireless detector are activated (enable) or deactivated (disable)
- RFM high temperature
o Determine the temperature above which you must be alarmed. - RFM low temperature
o Determine the temperature below which you must be alarmed. - RFM high humidity
o Determine the humidity above which you must be alarmed. - RFM low humidity
Advanced settings
Sound Alarm- Alarm sound (siren) is activated (enable) or deactivated (disable)
Alarm Auto Record
- Auto recording when alarm is activated (enable) or deactivated (disable)
Alarm Snapshot email
- Determine receiver email address when alarm is activated (to receive camera snapshots)
Reminder
16
Advanced settings
Setting > Accessory
Add accessories to your system.
Add motion detection alarm (for camera only).
- Turn the camera into the location to record when the alarm goes off - Click Begin Learning
- Click Refresh List
- Select untreaded detector (000000)
- Select Motion Detection Alarm in column Association Name - Enter Zone 00
- Select Detector Attribute: Away
- Select Action: Record + Alarm Email + PTZ Trace - Click Add New Setting
Add other accessories
- Turn the camera into the location to record when the alarm goes off - Click Begin Learning
- Activate the sensor of the accessory - Click Refresh List
- Select the serial number in the untreaded detector column
- Select the name of the accessory in the column Association Name - Enter a zone number
- Select required alarm status in column Attribute - Select required Action
Advanced settings
Advanced Settings
-
Click Stop learning
-
To enter another accessory start again
Accessory Zone Accessory Zone Camera 00 Hallway 2 07 Hallway 01 Garage 08 Kitchen 02 Smoke Detector 50 Living Room 03 Remote Control Disarm 80 Master Bedroom 04 Remote Control Arm 85 Bedroom 1 05 Remote Control Stay 90 Bedroom 2 06 Remote Control Panic Button 95
Association Name RC Remote Control
Arm
RC Remote Control Disarm RC Remote Control Stay RC Control Panic Button PIR Motion Sensor Door Sensor Smoke Detector Gas Detector IR Photobeam Detector Glass Broken Sensor W
ater Sensor Panic Button SOS Medical help Hijack
Alarm
Motion Detection (Camera)
Detector Attribute Not use
Detector Attribute Away x x x x Detector Attribute Stay
Detector Attribute Emergency x x x x x x x x x x x ACTION: Record x x x x x x x x x x x x ACTION: To Alarm Center x x x x x x x x x x x ACTION: AlarmSound x x x x x x
ACTION: Alarm Email x x x x x x x x x x x x ACTION: PTZ Trace x x x x x x x x
18
Advanced settings
Setting > Alarmplan
Possibility to set an alarm schedule according to your requirements. - Click select day
- Enter Start Time - Enter End Time - Click Change
Advanced settings
Setting > 4G
20
Advanced settings
Admin > User
Advanced settings
Admin > Upgrade
22
Advanced settings
Admin > Log
Advanced settings
Camera > Realtime video
24
Advanced settings
Camera > Audio and Video
Advanced settings
Camera > PTZ
26
Advanced settings
Record > Manage Record
Advanced settings
Record > Record Configuration
Here you can change the settings of the SD card in your camera.
28
Advanced settings
Cloud Alarm > Cloud Storage
Advanced settings
Cloud Alarm > Local Configuration
30
Advanced settings
Camera Settings
- Open the CMS manager - Click the right mouse button - Select configure
Advanced settings
Camera Settings > Media Settings
32
Advanced settings
Camera Settings > Time Setting
Advanced settings
Camera Settings > 3G connection setting
Set your 3G connection here.
Advanced settings
Camera Settings > WIFI configure
Configure your WIFI network here, or go to page 8 for online setting. - Tick the box of EnableWIFI
- Click Change, Save EnableWIFI - Click ViewWireless Networks
36
Advanced settings
Camera Settings > Ethernet
Shows status of your Ethernet.
Advanced settings
Camera Settings > Service configure
38
Advanced settings
Camera Settings > Record Configure
Advanced settings
Camera Settings > Record Configure
40
Advanced settings
Camera Settings > Admin Password setting
Advanced settings
Camera Settings > PTZ setting
42
Advanced settings
Camera Settings > Network Status
Advanced settings
CMS Settings > Overview > Buttons on the right
- First button shows an overview of all connected cameras - Second button shows the settings of the system
- Third button is used to turn the speaker on or off - Fourth button is for direct help (file)
44
Advanced settings
CMS Settings > Overview > Buttons down on the left
- The 4 buttons down on the left are used to set the camera overview o 1 screen
Advanced settings
CMS Settings > Overview > Buttons down on the right
- The 6 buttons down on the right are used for the following o Zoom in
o Zoon out
o Login Surveillance center (external connection) • Enter your Camera ID number
• Your Login (admin) and Password (admin • And connect
46
Advanced settings
CMS Settings > Camera Local
- Click on the camera (button right, above)
Advanced settings
CMS Settings > Settings > Snapshot Setting
48
Advanced settings
CMS Settings > Settings > Warning Setting
CMS Settings > Settings > Video Window Display
- Determine status realtime warning notification on your PC screen (on/ off).
Advanced settings
CMS Settings > Settings > Service IP Configure
50
Advanced settings
CMS Settings > Settings > Other Setting
- Determine status video setting and status updates
- Display on or off. User will be asked for settings when logging in. - All login history is saved, when software is reinstalled you can import
the history here.
Advanced settings
CMS Settings > External Camera > Login
52
Advanced settings
CMS Settings > External Camera > Alias Setting
- Use the right hand button on your mouse to select the camera. - Select Camera Local Information.
Advanced settings
CMS Settings > External Camera > Extra users
- Use the right hand button on your mouse to select the server of your camera - Select Group User Manager
- Add users and set their passwords.
54
Advanced settings
APP Settings > Login APP Settings
Open the AlarmSecur app
- Enter Serial Number Camera (starting with CN) - Enter User name
- Enter Password
Tick Login if you want the phone to remember your details
Tick Password if you want the phone to remember your password Tick Favorites if you want the phone to add this camera to your favorites
APP Settings > Login > Magnifying glass
Advanced settings
APP Settings > Login > Start
56
Advanced settings
APP Settings > Login > System Settings
Click on the radar wheel to adjust your system settings
Advanced settings
APP Settings > Login > System Settings
Snapshot
58
Advanced settings
Alarm Settings
- Activate real time alarm
- Activate alarm siren when app active in background - Activate alarm vibration when app active in background - Push alarm registration server
- Push alarm server
Advanced settings
Server IP
60
Advanced settings
Settings system
Advanced settings
More
- Erase history - Display 3G signal
62
Advanced settings
Local Snapshot Management
Advanced settings
APP Settings > Overview
Choose the camera you wish to view
- Click on the the text to have direct view + settings
- Geen Push alarm shows the status of Push alarm per camera. - Camera will ask you to go directly (LAN, your home network)
64
Advanced settings
App Settings > Cameraview
Advanced settings
App Settings > Cameraview > Controls
Top left corner
- Camera to take instant snapshot - Recorder to take instant recording - Third button to reverse image
Top middle
- Zoom in to 25% in 6 steps (85%, 75%, 65%, 50%, 35%, 25%)
- Zoom out to 175% in 6 steps (115%, 125%, 135%, 150%, 165%, 175%)
Top right corner
- Shows speed of the connection
- Signal strength of a cellular connection (3G or 4G) - Shield shows if alarm is armed or disarmed
6 symbols on the bottom from left to right:
66
Advanced settings
App Settings > Cameraview > Controls > Recordings
- Gives an overview of all alarm recordings
Advanced settings
App Settings > Cameraview > Controls > Settings
- 3G Configuration
o Shows the status of the 3G configuration
-
Recording settings
o
Determine video settings, resolution, and priority
-
Alarm settings
68
Advanced settings
o Set SMS numbers (when 3G or 4G) - WIFI configuration
o Set WIFI settings of Alarmsystem
App Settings > Cameraview > Controls > Settings
- Time and date
Advanced settings
App Settings > Cameraview > Controls > More
- Download recordings to your phone - Settings push alarm management
o Activate or deactivate push alarm service - User management
o Add users to your requirements
Bleu = Systemlight SD
Yellow = Power
