• No results found

Field measurements of horizontal stress on an instrumented pile in sand

N/A
N/A
Protected

Academic year: 2020

Share "Field measurements of horizontal stress on an instrumented pile in sand"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Variation of stationary horizontal stress with pile-tip depth (after Chow 1997)
Figure 2.  Cone Penetration Test qc and fs data.
Figure 3. Load-displacement response during maintained-load test.
Figure 4. Horizontal stress mobilized at different h/D ratios.

References

Related documents

4 of 14: South elevation (bank barn on left; gable-roof barn in background at right) (KSHS) 5 of 14: Looking west. Bank barn in background, left; gable-roof barn and lean-to at

Such a platform covers a series of important aspects: (1) knowledge gain regarding transmission events between humans and animals, which will allow the identification of critical

For example, you could transfer your existing debt to a 0% credit card in order to reduce your monthly payments as well as get out of debt sooner and subsidize your ongoing

the measured resistance value of the valve is out of limit, the voltage at KA/KD valve is too high. • cable / connector is defective and has contact to battery voltage •

This study attained a range of oral pressure values for dentulous group and edentulous group, which when compared showed that there is decrease in overall pres- sure in

strategy evaluation activities are: appraising internal and external factors that are the root of present strategies, measuring performance, and corrective actions when

The acclimatization of acidogenic microorganisms and utilization in batch digestion and upflow packed bed reactor for treatment of tannery wastewater is novel methodology compared

However, with adaptive streaming a client might request subsequent segments at different quality levels to manage varying network conditions, based on an estimation