• No results found

Production of Boron Carbide Reinforced 2024 Aluminum Matrix Composites by Mechanical Alloying

N/A
N/A
Protected

Academic year: 2020

Share "Production of Boron Carbide Reinforced 2024 Aluminum Matrix Composites by Mechanical Alloying"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1Morphology of 10 vol% B4Cp/2024Al milled 5 hrs with different PCA addition. (a) 1 mass%, (b) 2 mass%, (c) 4 mass%.
Fig. 2Sections of 10 vol%B4Cp/2024Al composite powders milled with different time. a) 1 h, b) 2 h, c) 3 h, d) 5 h
Fig. 4Interface morphologies in 10 vol%B4Cp/Al composites producedby mechanical alloying-hot extrusion technology
Fig. 7Variation of yield strength of composites with different volumefraction and aspect ratios of B4C reinforcements particles.

References

Related documents

In response to the economic recession in the country the amendments of Employment Promotion Law have been passed, which aimed to modify the economic recession

delian factor for flatness, inherited from the pistillate parent) which shows in the next generation a Mendelian segregation of flat-leaved plants (a’PFF and a’pFj) and

segi tingkahlaku yang dikatakan gangguan seksual dan yang paling dianggap sebagai..

data suggest that hypoxic conditions alter lipid composi- tion of the cells, mainly through the oxygen-dependent reactions (fatty acid desaturation, ergosterol and sphin-

Wound, Wound infections, Wound healers, Wound healing activity, Wound healing medicinal

Therefore, this research was conducted to compare the metabolite profile of green leaf, attached yellow, fallen yellow, fallen dry, and fermented green

According to Table 7, the level of signifi- cance of the sub-hypothesis is less than 0.05; therefore, there is a significant relationship be- tween virtual news