• No results found

Optical Probe for Near Infrared (NIR) Fluorescence Signal Detection with High Optical Performance and Thermal Stability

N/A
N/A
Protected

Academic year: 2020

Share "Optical Probe for Near Infrared (NIR) Fluorescence Signal Detection with High Optical Performance and Thermal Stability"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Pictures of (a) the array of LEDs and (b) the mirror for the array of LEDs.
Figure 2. Simulation results on propagation of the optical probe system at (a) 0 cm (b) 5 cm (c) 10 cm (d) 20 cm (e) 40 cm and (f) 80 cm distance from the probe
Figure 5. Liquid circulation module for heat dissipa-tion of the array of LEDs.
Figure 7. (a) A piece of gauze to test fluorescence signals of ICG (b) fluo- rescence image by 740 LEDs (c) fluorescence image by 780 LEDs and (d) fluorescence image by 780 LEDs with a short-pass edge filter

References

Related documents

The sample was consisted of 24 professional basketball coaches n = (24) from Greece who were coaching in the professional basketball league during 2013-2014 seasons. The

When we instrument using smoking bans facing one’s spouse, we find that the estimated impact of spousal smoking increases to .4, so that people whose spouses smoke are 40 percent

For the analysis of multichannel amplification , the present simulator has a definite advantage over the previously designed real time simulator in terms of flat gain with

Hertzian contact theory is used to provide the elastic force in the normal direction, which is called normal force-displacement model based on Hertzian theory.. As for the

Proteomic analysis indicated that HEV infection significantly induced 1014 differentially expressed proteins in HEV-infected HepG2 cells when supplemented with FBS compared

We have studied the effect of pH (3.0–9.0), sorption kinetics time (10–70 min) and adsorption isotherms (initial concentration 20–100 mg/L) of metal ion while analyzing

In the present study, the design displacement is controlled by various rubber typically HDRB i.e High damping rubber bearing having different thickness and also the frequency