• No results found

Shift power

N/A
N/A
Protected

Academic year: 2020

Share "Shift power"

Copied!
36
0
0

Loading.... (view fulltext now)

Full text

Loading

References

Related documents

After replacing the water filter, press and hold the Water Filter Replace button for three seconds to turn the indicator light off.. Replace the water filter approximately every

Turn ‘ON/OFF’ knob (A) slightly anti-clockwise towards the IGNITION position ( ) until reaching stop, press down and hold for 5 seconds (gas flows only to the pilot

If the TVLink S basestation status light (g) is not rapidly blinking blue already, press the ON/OFF button (a) for 5 seconds until the Bluetooth indicator (g) is rapidly

• To re-check the test complete indicator light, press the power button until the light turns on (about three seconds), then briefly press the power button again.. • To replace

On the phone enter the searching Bluetooth device mode and press and hold the Call Handling Button (MFB) for approximately 5 seconds until the indicator light blue and red on

Long press around 5 seconds Timer off/ WiFi setting touch button can switch to WiFi connection mode, when the WiFi indicator flashes quickly ( 3 times per second), which means

1) Ensure all doors, hood, and trunk are closed. Turn ignition on and off at least 5 times in 10 seconds. Indicator LED should start to flash. Leave ignition on. Once indicator

Within 5 seconds of pressing TRANSFER, press the 2-digit station location button (01-16) or memory button where you wish to transfer the call. The line’s indicator blinks yellow