• No results found

CM-16 User Guide

N/A
N/A
Protected

Academic year: 2020

Share "CM-16 User Guide"

Copied!
28
0
0

Loading.... (view fulltext now)

Full text

Loading

References

Related documents

Then press (F8) (labeled “Enter Data”), The prompt disappears, the screen’s function keys replace the editing function keys, and the intraflow designation on the screen for that

(If there are too many groups to fit on one page, you may press the PgDn and PgUp keys to scroll through the pages.) When the cursor is positioned at a desired group, press Enter

When the Mode Selection menu appears on screen, use the cursor buttons on the remote control to navigate to the available modes and press the ENTER button to select the new mode..

Press the keys on the right of the handset to set the volume for earpiece, ringtone, speakerphone mode, alarm, appointment signaling and the headset depending on the situation..

Press the keys on the right of the handset to set the volume for earpiece, ringtone, speakerphone mode, alarm, appointment signaling and the headset depending on the situation..

In standby mode, press the number keys to enter a phone number.. Press the call key to dial

Note: If the Far End site accidentally selects an incorrect video source for your End (Near End). The message “VCR not connected” displays on screen. Press the Camera or Aux button

1) Open the main menu screen and select the Contacts icon. 2) Highlight the contact you want to erase and press More. 3) To erase this contact only, select Delete contact; to