• No results found

Performance Improvement of External Inductor based Voltage Controlled DSTATCOM using Fuzzy Logic Controller

N/A
N/A
Protected

Academic year: 2020

Share "Performance Improvement of External Inductor based Voltage Controlled DSTATCOM using Fuzzy Logic Controller"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

References

Related documents

ror between the reference dc capacitor voltage and the sensed dc bus voltage of DSTATCOM is given to a proportional-integral (PI) controller whose output is

To increase the voltage gain for the new Boost converter from the solar power application, this project proposes usage of the coupled inductor and parallel

Figure 4 shows Fuzzy Logic Controller (FLC) [12] in which ∆ V (change in voltage) controls the modulation index and ∆ V dc (change in capacitor voltage) controls the

This paper presents a D-STATCOM with a proportional fuzzy controller based CHB multilevel inverter for the harmonics mitigation and voltage stability improvement by

The work deals with Distribution Static Compensator (DSTATCOM) working in voltage-control mode using photovoltaic (PV) array and Permanent Magnet Synchronous Generator (PMSG)

A voltage source converter (VSC) based DSTATCOM with a zig-zag transformer is used for the compensation of reactive power for voltage regulation along with load

Power Quality Improvement Using PI and Fuzzy Controller Based Dynamic Voltage Restorer.. Parveen Saini 1 and Vijay Kumar

Power quality problems such as transients, sags, swells and other distortions to the sinusoidal waveform of the supply voltage affect the performance of