• No results found

Bit Manipulation Accelerator for Communication Systems Digital Signal Processor

N/A
N/A
Protected

Academic year: 2020

Share "Bit Manipulation Accelerator for Communication Systems Digital Signal Processor"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 3: Puncturing.
Figure 5: Bit extraction/insertion operations of commercial DSPs.
Figure 7: Proposed shift-XOR array for logical operation.
Figure 8: Logical operation of bit extraction/insertion logic.
+2

References

Related documents

1 = Noise on a valid start bit, any of the data bits, or on the stop bit FE — Framing Error Flag. Set when a zero is detected where a stop bit

The tool can be used to associate a one-to-one mapping between every test class and tested class in a code base, or it may be used to manage a set of end-to-end tests for an entire

This 8-bit word, consisting of 4 Address bits (bit 7 to bit 4) and 4 Gain Control bits (bit 3 to bit 0), is loaded to the Control Data Input in serial format using the external

The roli instruction rotates the bits of register A in the right-to-left direction by the number of bit positions specified by the five-bit unsigned value, IMMED5, given in

Several mechanisms of CG are specifically enforced by the Code, including executive compensation, board independence, audit committee, external (statutory) audit,

The seed code-word also consist of 69 bits, but the 32 bits of code hopping data and the 28 bits of fixed data is replaced by a 60 bit seed value stored in the EEPROM.. The

In addition, a certificate of attendance to the most recent Annual Child Care Center Directors Meeting hosted by the Division of Early Care and Education is required to be

These bits contain the three Least Significant bits of the Standard Identifier for the received message bit 4 SRR: Standard Frame Remote Transmit Request bit (valid only if IDE bit