CAM2 Mixer/Pre-Amplifier Installation and Use Manual
Full text
Related documents
Adjusts the total output level of the amplifier without disturbing the individual settings of the microphone, telephone and auxiliary input volume controls.. (Set at factory in
ALC TEL VOLUME MIC VOLUME MUSIC VOLUME MUSIC MUTE RINGER VOLUME BASS TREBLE APHEX BOGEN COMMUNICATIONS VOX GND MUSIC IN CONTACT RING TEL RING APHEX TEL MIC BAL GND + MUSIC MUTE.
This output signal encompasses all internal signal processing, including master volume control, output modules processing, tone controls, and low-cut filtering.The connector labeled
MIC : Mute the microphone volume. LINE : Mute the line volume. SPEAKER : Unmute Use to transmit the infrared signal send by the IR remote. Audio Controlling Modes. MIC :
In Pre-Main amplifier mode, the AM-77 will use both the pre- and power amplification sections: the AM- 77 controls volume level and input selection controls. In Power
The Pure Resonance Audio RZMA120BT 4 zone commercial mixer amplifier is designed with 4 ohm, 70 Volt and 100 Volt terminals and 4 x 120W power output.. The RZMA12BT is a rack
This allows you to adjust your tone and volume on stage without changing the Direct Output signal level and confusing your sound man.. This gives you complete control over the
• Do not connect the speaker output leads from a power amplifier (Optional) to the speaker level input terminals of this unit, for this may cause malfunction or damage. • Do
