• No results found

The influence of climate change/variability on the prevalence of respiratory diseases: The case of asthma in Bamenda

N/A
N/A
Protected

Academic year: 2020

Share "The influence of climate change/variability on the prevalence of respiratory diseases: The case of asthma in Bamenda"

Copied!
14
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig 1.1: location of study area     Source: Authors 2015()
Figure 1.2: Histogram showing Rainfall values in Bamenda from 2007 to 2014 Source: Regional Service of Meteorology for the North West Region
Table 2: Temperature values in Bamenda from 2007 to 2014
Fig 1.4: Source:(a) Bamenda Health District area (b) Population of Health areas of Bamenda  Programme d‟Appui aux Capacités Décentralisées de Développement Urbain (PACCDU) BET : CAMGIS Plc
+6

References

Related documents

The paper is discussed for various techniques for sensor localization and various interpolation methods for variety of prediction methods used by various applications

The aim of this research is to investigate the comfort and safety of a novel device for measuring P-A trunk stiffness in a sample of young adults.. Methods: A sample of young

Also, both diabetic groups there were a positive immunoreactivity of the photoreceptor inner segment, and this was also seen among control ani- mals treated with a

penicillin, skin testing for immediate hyper-.. sensitivity to the agent should

Because of the recommended procedure for evaluating reliability (and validity) is to have bilingual participants fill out the questionnaire in both languages and assess the

19% serve a county. Fourteen per cent of the centers provide service for adjoining states in addition to the states in which they are located; usually these adjoining states have

Field experiments were conducted at Ebonyi State University Research Farm during 2009 and 2010 farming seasons to evaluate the effect of intercropping maize with

Nano wires are also obtained for the films of room temperature loaded films at 700 ° C and 1000 ° C, but nano wires are more dense for the direct loaded film in furnace at 700 ° C