ICS 77.040.10
Iron and steel
Determination of the conventional depth of hardening after surface heating English version of DIN EN 10328
Eisen und Stahl – Bestimmung der Einhärtungstiefe nach dem Randschichthärten
A comma is used as the decimal marker.
National foreword
This standard has been prepared by ECISS/TC 2 ‘Steel – Physico-chemical and non-destructive testing’ (Secretariat: France).
The responsible German body involved in its preparation was the Normenausschuss Werkstofftechnologie (Materials Technology Standards Committee), Technical Committee Prüfung nach der Wärmebehandlung. Amendments
DIN 50190-2, March 1979 edition, has been superseded by the specifications of EN 10328. Previous editions
DIN 50190-2: 1973-10, 1979-03.
D EUTSCHE NORM April 2005
DIN EN 10328
{
© No part of this standard may be reproduced without the prior permission of
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,
has the exclusive right of sale for German Standards (DIN-Normen).
Supersedes DIN 50190-2, March 1979 edition.
English price group 7 www.din.de www.beuth.de
9640376
Continued overleaf.
Document comprises 6 pages.
08.05
B55EB1B3C7662F79D1B59483A53B9F2F82C98BEEB7939EA7459046ABD6EC179060E1540D97FA4EDFB18B2D954C6DDFD2B475DCA649BF54539D3B68E76A98398C6364E9EA14634AE04B2F1D0F0DA02368E0B87A3DB1A485
English version
ICS 77.040.10
Iron and steel
Determination of the conventional depth of hardening after surface heating
© 2005. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members.
Ref. No. EN 10328:2005 E
Eisen und Stahl – Bestimmung der Ein-härtungstiefe nach dem Randschicht-härten
This European Standard was approved by CEN on 2005-01-03.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CEN member.
The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.
EN 10328
February 2005Management Centre: 36, rue de Stassart, B-1050 Brussels European Committee for Standardization
Comité Européen de Normalisation Europäisches Komitee für Normung
ÈÉË
Produits sidérurgiques –Détermina-tion de la profondeur convenDétermina-tionelle de trempe après chauffage superficiel
B55EB1B3C7662F79D1B59483A53B9F2F82C98BEEB7939EA7459046ABD6EC179060E1540D97FA4EDFB18B2D954C6DDFD2B475DCA649BF54539D3B68E76A98398C6364E9EA14634AE04B2F1D0F0DA02368E0B87A3DB1A485
Page 2 EN 10328:2005 3 3 3 3 4 4 5
Page 3 EN 10328:2005
B55EB1B3C7662F79D1B59483A53B9F2F82C98BEEB7939EA7459046ABD6EC179060E1540D97FA4EDFB18B2D954C6DDFD2B475DCA649BF54539D3B68E76A98398C6364E9EA14634AE04B2F1D0F0DA02368E0B87A3DB1A485
Page 4
Page 5 EN 10328:2005
B55EB1B3C7662F79D1B59483A53B9F2F82C98BEEB7939EA7459046ABD6EC179060E1540D97FA4EDFB18B2D954C6DDFD2B475DCA649BF54539D3B68E76A98398C6364E9EA14634AE04B2F1D0F0DA02368E0B87A3DB1A485
