• No results found

Interactive forces between lignin and cellulase as determined by atomic force microscopy

N/A
N/A
Protected

Academic year: 2020

Share "Interactive forces between lignin and cellulase as determined by atomic force microscopy"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1 Cellulose conversion of SBKP substrate throughoutenzymatic hydrolysis with varying amounts of Kraft Ligninadded to the reaction
Figure 2 Representative AFM force curves between the immobilized cellulase system and cellulose-coated tip, lignin-coated tip, anduncoated polystyrene tip
Figure 3 Histogram of AFM measured forces between the immobilized cellulase system and lignin-coated tip and cellulose-coated tip.(a) Lignin-coated tip and (b) cellulose-coated tip
Figure 4 Representative force curves between the immobilized cellulase system and hydrophobic (polystyrene) tip, chemicallymodified OH tip, and chemically modified COOH tip

References

Related documents

This poor performance in the optimal rule is exactly what leads Lucas to claim that agents’ decision rules will change in the face of deviation from the assumed form for

Using a conventional perturbation expansion, one can derive a first-order correction to the solitary-wave speed, but at the next order, algebraically secular terms appear, which

Rutger, Berglund Johan, Persson Rigmor E., Renvert Stefan, Prediction of Hip and Hand Fractures in older persons with or without a diagnosis of Periodontitis, Bone (2010),

Hence, the hypothesis to be investigated in this study was that the combination of multi-temporal NDVI images and microwave data acquired within the rice growing

In early mitosis, the localization and activity of MCAK at centrosomes and spindle poles appear to be mainly controlled by the coordinated regulation of Aurora A

The split tensile strength increases at the addition of 1% glass fiber and afterwards there is slight decrease in split tensile strength.The optimum value of fiber content of GFRC

Combining active snubber, auxiliary resonant circuit, rectifiers, or switched- capacitor-based resonant circuits and so on, these techniques ready active switch into zero