THERAPY EQUIPMENT LTD

(1)

THERAPY EQUIPMENT LTD

Manufacturers of Health Care Equipment

6007 - 02/N20 (“ENTONOX”) DEMAND VALVE 7701 -

DIAMOND HIGH SUCTION CONTROLLER

4550 -

RAIL MOUNTED THERAPY SOS UNIT

5050 - BULLNOSE DIALREG (O2)

9555 - TWIN DIAMOND RANGE OXYGEN FLOWMETER & PROBE

9506 - DIAMOND RANGE AIR FLOWMETER & PROBE

U.K.

PRICE

LIST

Tel: 01707 652270 Fax: 01707 652622

sales@therapyequipment.co.uk

2

6

0

1

Q U AL IT Y U K MANUF_A C T U R E R S IN_{CE 198}3

(2)

Therapy Equipment Ltd

PRODUCT RANGE

YEAR OF MANUFACTURE COLOUR CODING CHART

2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016

All Prices Quoted are in Pounds Sterling and are Exclusive of VAT, Carriage and Packing.

Where other manufacturers products are included, we reserve the right to adjust the Sales Price

to reflect the current conditions.

Carriage Charges

(Up to 10KG)

-

Standard 2 Day Delivery

£12.50

-

Overnight Delivery

£15.00

-

Overnight Before 12 Noon

£30.00

-

Overnight Before 10 AM

£40.00

-

Theatre Suction

£25.00

-

Northern Ireland Surface

£30.00

-

Saturday Delivery

£45.00

-

Guaranteed Next Day

Post Service (Small Items)

£7.50

-

Small Value Postal Service

£3.00

Please note: Carriage charges for larger orders will be levied at cost, depending

upon the overall weight of the consignment.

REGULATORS

PAGES 1-6

COMFORT RANGE

PAGE 7

FLOWMETERS

PAGES 8-11

SUCTION RANGE

PAGES 12-18

SUNDRIES

PAGES 19-21

RAIL

PAGES 22-23

REPAIRS

PAGES 24-25

SPARES

PAGES 26-32

Recondition

ing

(3)

5032 5030 5010 5000

1 REGULATORS

- MEDIREGS

A complete range of regulators specifically designed for Medical Use. Each regulator has a 4 Year Warranty on Function, and comes complete with a protective, Gas Distinct Coloured plastic case.

Standard Medireg range suitable for use with 137Bar Cylinder. Regulators suitable for 200Bar Cylinders are available on request.

MEDIREG WITH 3/8" OUTLET

Single Stage 'Medireg' with standard 3/8" Coned Outlet. Each regulator is pre-set to 60 PSI (4 Bar) and has a Safety Valve which will vent at 105 PSI (7 Bar).

5000 Single Stage Medireg - Bullnose - O2 90.00

5010 Single Stage Medireg - Bullnose - Air 92.00

5005 Single Stage Medireg - Pin Index - O2 115.00

5015 Single Stage Medireg - Pin Index - Air 117.00

MEDIREG AND DIAMOND RANGE FLOWMETER

Single Stage 'Medireg' with a Diamond Range 0-15 LPM Flowmeter attached. 5030 Single Stage Medireg and Diamond Flowmeter - Bullnose - O2 122.50 5040 Single Stage Medireg and Diamond Flowmeter - Bullnose - Air 124.50 5035 Single Stage Medireg and Diamond Flowmeter - Pin Index - O2 147.50 5045 Single Stage Medireg and Diamond Flowmeter - Pin Index - Air 149.50

MEDIREG AND SCHRADER VALVE

Single Stage 'Medireg' with gas distinct Schrader Valve attached.

5032 Single Stage Medireg and Schrader - Bullnose - O2 124.00

5042 Single Stage Medireg and Schrader - Bullnose - Air 126.00

5037 Single Stage Medireg and Schrader - Pin Index - O2 149.00

5047 Single Stage Medireg and Schrader - Pin Index - Air 151.00

**PLEASE NOTE THAT ADAPTOR (PART NO. 5000-08-01) IS

REQUIRED TO ATTACH A SCHRADER VALVE TO A MEDIREG**

REGULATOR ACCESSORIES

SEE PAGE 5 BULLNOSE

F

CYLINDER CHART

The following are usual fittings for Medical Oxygen and Air Cylinders (Entonox Gas is supplied only with Pin Index fitting cylinders)

PIN INDEX

D

PIN INDEX

E

BULLNOSE

G

PIN INDEX

J

(4)

5152 5150

Single Stage Medireg with integral Flowmeter.

0-15 LPM FLOWREG

5150 Single Stage Flowreg (0-15 LPM) - Bullnose - O2 120.00

5155 Single Stage Flowreg (0-15 LPM) - Bullnose - Air 122.00

5152 Single Stage Flowreg (0-15 LPM) - Pin Index - O2 145.00

5157 Single Stage Flowreg (0-15 LPM) - Pin Index - Air 147.00

0-5 LPM FLOWREG

5190 Single Stage Flowreg (0-5 LPM) - Bullnose - O2 190.00

5195 Single Stage Flowreg (0-5 LPM) - Bullnose - Air 192.00

5192 Single Stage Flowreg (0-5 LPM) - Pin Index - O2 210.00

5197 Single Stage Flowreg (0-5 LPM) - Pin Index - Air 212.00

0-2.5 LPM FLOWREG

5180 Single Stage Flowreg (0-2.5 LPM) - Bullnose - O2 190.00

5185 Single Stage Flowreg (0-2.5 LPM) - Bullnose - Air 192.00

5182 Single Stage Flowreg (0-2.5 LPM) - Pin Index - O2 210.00

5187 Single Stage Flowreg (0-2.5 LPM) - Pin Index - Air 212.00

0-500cc FLOWREG

5170 Single Stage Flowreg (0-500cc) - Bullnose - O2 225.00

5175 Single Stage Flowreg (0-500cc) - Bullnose - Air 227.00

5172 Single Stage Flowreg (0-500cc) - Pin Index - O2 250.00

5177 Single Stage Flowreg (0-500cc) - Pin Index - Air 252.00

OTHER FLOWREG CONFIGURATIONS

FLOWREG WITH 3/8” OUTLET

5161 Single Stage Flowreg (0-15 LPM) & 3/8 Outlet - Bullnose - O2 125.00 5166 Single Stage Flowreg (0-15 LPM) & 3/8 Outlet - Bullnose - Air 127.00 5163 Single Stage Flowreg (0-15 LPM) & 3/8 Outlet - Pin Index - O2 150.00 5168 Single Stage Flowreg (0-15 LPM) & 3/8 Outlet - Pin Index - Air 152.00

FLOWREG & SCHRADER

5151 Single Stage Flowreg (0-15 LPM) & Schrader - Bullnose - O2 156.00 5156 Single Stage Flowreg (0-15 LPM) & Schrader - Bullnose - Air 158.00 5153 Single Stage Flowreg (0-15 LPM) & Schrader - Pin Index - O2 182.00 5158 Single Stage Flowreg (0-15 LPM) & Schrader - Pin Index - Air 184.00

FLOWREG & ADDITIONAL FLOWMETER

5154 Single Stage Flowreg (0-15 LPM) & Flowmeter - Bullnose - O2 157.50 5159 Single Stage Flowreg (0-15 LPM) & Flowmeter - Bullnose - Air 159.50 5164 Single Stage Flowreg (0-15 LPM) & Flowmeter - Pin Index - O2 182.50 5169 Single Stage Flowreg (0-15 LPM) & Flowmeter - Pin Index - Air 184.50

REGULATORS

- FLOWREGS

(5)

Single Stage ‘Medireg’ with pre-set ‘dialled’ flow rates. 5055 5050 5056

3 0-15 LPM DIALREG

Settings: 0/1/2/3/4/5/6/7/8/10/12/15 LPM

5050 Single Stage Dialreg (0-15 LPM) - Bullnose - O2 127.50

5060 Single Stage Dialreg (0-15 LPM) - Bullnose - Air 129.50

5054 Bullnose Dialreg (0-15 LPM) with R/A Nebuliser Adaptor 142.50

5055 Single Stage Dialreg (0-15 LPM) - Pin Index - O2 152.00

5065 Single Stage Dialreg (0-15 LPM) - Pin Index - Air 154.00

5059 Pin Index Dialreg (0-15 LPM) with R/A Nebuliser Adaptor 167.00

0-15 LPM DIALREG (LOW START)

Settings: 0/0.5/0.8/1/2/4/5/6/8/10/12/15 LPM

5100 Single Stage Dialreg (0-15 LPM LS) - Bullnose - O2 140.00

5110 Single Stage Dialreg (0-15 LPM LS) - Bullnose - Air 142.00 5105 Single Stage Dialreg (0-15 LPM LS) - Pin Index - O2 162.00 5115 Single Stage Dialreg (0-15 LPM LS) - Pin Index - Air 164.00

0-1 LPM DIALREG

Settings: 0/0.1/0.2/0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0/F LPM

Please Note: All units manufactured since 1999 have a F (“Flush”) flow set at approximately 3LPM incorporated into the unit, to assist with the removal of the regulator from the cylinder. Please take care when replacing damaged knobs to ensure the new knob states the same flowrates as the old.

5070 Single Stage Dialreg (0-1 LPM) - Bullnose - O2 150.00

5080 Single Stage Dialreg (0-1 LPM) - Bullnose - Air 152.00

5075 Single Stage Dialreg (0-1 LPM) - Pin Index - O2 175.00

5085 Single Stage Dialreg (0-1 LPM) - Pin Index - Air 177.00

2/4 LPM DIALREG

Settings: 0/2/4 LPM

5120 Single Stage Dialreg (2/4 LPM) - Bullnose - O2 115.00

5130 Single Stage Dialreg (2/4 LPM) - Bullnose - Air 117.00

5125 Single Stage Dialreg (2/4 LPM) - Pin Index - O2 135.00

5135 Single Stage Dialreg (2/4 LPM) - Pin Index - Air 137.00

OTHER DIALREG CONFIGURATIONS

DIALREG WITH 3/8” OUTLET

5053 Single Stage Dialreg (0-15 LPM) & 3/8 Outlet - Bullnose - O2 132.50 5063 Single Stage Dialreg (0-15 LPM) & 3/8 Outlet - Bullnose - Air 134.50 5058 Single Stage Dialreg (0-15 LPM) & 3/8 Outlet - Pin Index - O2 157.00 5068 Single Stage Dialreg (0-15 LPM) & 3/8 Outlet - Pin Index - Air 159.00

DIALREG & SCHRADER

5051 Single Stage Dialreg (0-15 LPM) & Schrader - Bullnose - O2 166.50 5061 Single Stage Dialreg (0-15 LPM) & Schrader - Bullnose - Air 168.50 5056 Single Stage Dialreg (0-15 LPM) & Schrader - Pin Index - O2 191.00 5066 Single Stage Dialreg (0-15 LPM) & Schrader - Pin Index - Air 193.00

DIALREG & ADDITIONAL FLOWMETER

5052 Single Stage Dialreg (0-15 LPM) & Flowmeter - Bullnose - O2 165.00 5057 Single Stage Dialreg (0-15 LPM) & Flowmeter - Pin Index - O2 189.50

REGULATORS

- DIALREG

(6)

We will take any of your old Regulators in exchange for new.

5280 5265

5250

**When ordering New for Old Air Units please use

“Part No./Air”

_**

MEDIREG

5225 New for Old Medireg - Bullnose - O2 76.50

5227 New for Old Medireg - Bullnose - O2 - 10 off 72.00

5230 New for Old Medireg - Pin Index - O2 97.75

5232 New for Old Medireg - Pin Index - O2 - 10 off 92.00

MEDIREG & DIAMOND RANGE FLOWMETER

5255 New for Old Medireg & Flowmeter - Bullnose - O2 104.10 5257 New for Old Medireg & Flowmeter - Bullnose - O2 - 10 off 98.00 5260 New for Old Medireg & Flowmeter - Pin Index - O2 125.30 5262 New for Old Medireg & Flowmeter - Pin Index - O2 - 10 off 118.00

MEDIREG & SCHRADER

5265 New for Old Medireg & Schrader - Bullnose - O2 105.40

5267 New for Old Medireg & Schrader - Bullnose - O2 - 10 off 99.20 5270 New for Old Medireg & Schrader - Pin Index - O2 126.65 5272 New for Old Medireg & Schrader - Pin Index - O2 - 10 off 119.20

DIALREG

5245 New for Old Dialreg (0-15 LPM) - Bullnose - O2 108.30

5247 New for Old Dialreg (0-15 LPM) - Bullnose - O2 - 10 off 102.00

5250 New for Old Dialreg (0-15 LPM) - Pin Index - O2 129.20

5252 New for Old Dialreg (0-15 LPM) - Pin Index - O2 - 10 off 121.60

DIALREG & SCHRADER

5280 New for Old Dialreg (0-15 LPM) & Schrader - Bullnose - O2 141.50 5282 New for Old Dialreg (0-15 LPM) & Schrader - Bullnose - O2 - 10 off 133.20 5285 New for Old Dialreg (0-15 LPM) & Schrader - Pin Index - O2 162.35 5287 New for Old Dialreg (0-15 LPM) & Schrader - Pin Index - O2 - 10 off 152.80

FLOWREG

5235 New for Old Flowreg (0-15 LPM) - Bullnose - O2 97.75

5237 New for Old Flowreg (0-15 LPM) - Bullnose - O2 - 10 off 92.00

5240 New for Old Flowreg (0-15 LPM) - Pin Index - O2 119.00

5242 New for Old Flowreg (0-15 LPM) - Pin Index - O2 - 10 off 112.00

BULLNOSE

F

CYLINDER CHART

The following are usual fittings for Medical Oxygen and Air Cylinders (Entonox Gas is supplied only with Pin Index fitting cylinders)

PIN INDEX

D

PIN INDEX

E

BULLNOSE

G

PIN INDEX

J

REGULATORS

- NEW FOR OLD

(7)

6047

5

Two stage adjustable Regulators (“Mickey Mouse” Type). Adjustable between 0-150 PSI.

Predominantly for use with Air Tools. Function Warranty: 1 Year.

MULTISTAGE REGULATORS

6040 Multi Stage Regulator - Bullnose - O2 195.00

6041 Multi Stage Regulator - Bullnose - Air 195.00

6050 Multi Stage Regulator - Pin Index - O2 250.00

6051 Multi Stage Regulator - Pin Index - Air 250.00

MULTISTAGE REGULATOR & SCHRADER VALVE

Multi Stage Regulator with Gas Distinct Schrader Valve attached.

We supply new equipment in exchange for your old.

6045 Multi Stage Regulator & Schrader Valve - Bullnose - O2 229.00 6047 Multi Stage Regulator & Schrader Valve - Bullnose - MA7 229.00 6055 Multi Stage Regulator & Schrader Valve - Pin Index - O2 284.00 6057 Multi Stage Regulator & Schrader Valve - Pin Index - MA7 284.00

NEW FOR OLD MULTISTAGE REGULATORS

5300 New for Old Multi Stage Regulator - Bullnose - O2 165.75

5301 New for Old Multi Stage Regulator - Pin Index - O2 212.50

5310 New for Old Multi Stage Regulator & Schrader - Bullnose - O2 194.65 5315 New for Old Multi Stage Regulator & Schrader - Bullnose - MA7 194.65 5311 New for Old Multi Stage Regulator & Schrader - Pin Index - O2 241.40 5316 New for Old Multi Stage Regulator & Schrader - Pin Index - MA7 241.40

REGULATORS

- MULTISTAGE & ACCESSORIES

CYLINDER KEYS

6150 Bullnose Cylinder Key (Spindle Key) 3.25

6151 Pin Index Cylinder Key (T Type) 17.50

6153 Ratchet Cylinder Key 22.00

6154 Combination Spanner (Open Spanner and Bullnose Key combined) 11.60

6155 Chain to attach key to Regulator 2.75

6157 Consumable Pin Index Key 2.75

SEALS

6159 Bodok Seal 0.95 6304 Bullnose O Ring 0.60 6099 Vapouriser O Ring 0.60 6159 5701

5701 Stepdown Regulator Inclusive (MA7 Probe - MA4 Schrader) 120.00 Converts a 7 Bar Input Pressure to a 4 Bar Output Pressure.

6150

6153 6157 6151

(8)

Gas Distinct Non Return Valve for use at Low Pressures. The Standard fitting has a 1_/

4 BSP Male Thread (1/4 BSP Female Thread available on request).

Plastic Collar (/P) and Metal Collar (/M) are available.

6101/P

6111/P

6180/P

Plastic (/P) Metal (/M)

6101 Schrader Valve - O2 34.00 52.00

6102 Schrader Valve - 4 Bar Air 34.00 52.00

6103 Schrader Valve - 7 Bar Air 34.00 52.00

6104 Schrader Valve - Vacuum 34.00 52.00

6105 Schrader Valve - Nitrous Oxide (N2O) 34.00 52.00

6118 Schrader Valve - O2/N2O (“Entonox”) 34.00 52.00

6115 Schrader Valve for Medireg - O2 36.00 54.00

6119 Schrader Valve for Medireg - 4 Bar Air 36.00 54.00

TWIN SCHRADER OUTLETS (“SPLITTERS”)

To provide the ability to take two supplies from one outlet.

Hose Assembly with Indirect Probe connected to either Single or Twin Gas Distinct Schrader Valve. 1.5 Metre is the standard length, however other lengths are available on request.

Plastic (/P) Metal (/M) 6107 Twin Schrader on Back Bar with 3/8” Nut (No Probe) - O2 89.00 124.00 6108 Twin Schrader on Back Bar with 3/8” Nut (No Probe) - 4 Bar Air 89.00 124.00 6109 Twin Schrader on Back Bar with 3/8” Nut (No Probe) - 7 Bar Air 89.00 124.00 6110 Twin Schrader on Back Bar with 3/8” Nut (No Probe) - Vacuum 89.00 124.00

6111 Twin Schrader on Back Bar with Probe - O2 109.00 139.00

6112 Twin Schrader on Back Bar with Probe - 4 Bar Air 109.00 139.00 6113 Twin Schrader on Back Bar with Probe - 7 Bar Air 109.00 139.00 6114 Twin Schrader on Back Bar with Probe - Vacuum 109.00 139.00

Plastic (/P) Metal (/M)

6180 Single Oxygen 64.00 82.00

6181 Single 4 Bar Air 64.00 82.00

6182 Single 7 Bar Air 64.00 82.00

6183 Single Vacuum 64.00 82.00

6184 Single Nitrous Oxide (N2O) 64.00 82.00

6185 Single "Entonox" (O2/N2O) 64.00 82.00

6195 Twin Oxygen 119.00 154.00

6196 Twin 4 Bar Air 119.00 154.00

6197 Twin 7 Bar Air 119.00 154.00

6198 Twin Vacuum 119.00 154.00

6199 Twin Nitrous Oxide (N2O) 119.00 154.00

RAIL MOUNTED SCHRADER VALVES

REGULATORS

- SCHRADERS

Rail Mounted Schrader Valve (s) complete with 1.5M Hose/Probe.

6130 Rail Mounted Single Schrader Valve - O2 86.00

6131 Rail Mounted Single Schrader Valve - MA4 86.00

6132 Rail Mounted Single Schrader Valve - Vacuum 86.00

6120 Rail Mounted Twin Schrader Valve - O2 169.00

6121 Rail Mounted Twin Schrader Valve - MA4 169.00

6123 Rail Mounted Twin Schrader Valve - Vacuum 169.00

6140 Mini Schrader Valve - Oxygen 50.00

6141 Mini Schrader Valve - Air 50.00

6145 Mini Schrader Indirect Probe - Oxygen 20.00

6146 Mini Schrader Indirect Probe - Air 20.00

SCHRADER EXTENSION LEAD

MINI SCHRADER

6140 6145

(9)

6025 6010 6007

7

Extensive range of equipment for use with “Entonox” (50% O2/50% N2O).

In line with our range of Medical Regulators each unit is supplied with a Gas Distinct Coloured plastic case and with a 4 Year Warranty.

The Demand Valve is FULLY AUTOCLAVABLE, meets the relevant European Standards and supplied with a 3 Year Function Warranty.

Hose Assemblies (either PVC or Silicone) can be supplied up to a maximum of 4 Metres. 6000 Comfort Range Kit with PVC Hose, comprising:

- Single Stage Medireg & Schrader - Pin Index - O2/N2O - Demand Valve with 2 Metres of PVC Hose & Probe

- Facemask - Mouthpiece x 5 350.00

6002 Comfort Range Kit with Silicone Hose, comprising: - Single Stage Medireg & Schrader - Pin Index - O2/N2O - Demand Valve with 2 Metres of Silicone Hose & Probe

6095 Complete Comfort Range in Carry Case (PVC Hose) - Special 'Swivel' Pin Index Medireg & Schrader - O2/N2O - Demand Valve with 2 Metres of PVC Hose & Probe

6097 Complete Comfort Range in Carry Case (Silicone Hose) - Special 'Swivel' Pin Index Medireg & Schrader - O2/N2O - Demand Valve with 2 Metres of Silicone Hose & Probe

DEMAND VALVE ONLY (PIPELINE MODEL)

6005 O2/N2O Demand Valve only with 2 Metres of PVC Hose/Probe

(Supplied with Facemask/Mouthpiece) 207.50

6005/3MO2/N2O Demand Valve only with 3 Metres of PVC Hose/Probe

6005/4MO2/N2O Demand Valve only with 4 Metres of PVC Hose/Probe

6007 O2/N2O Demand Valve only with 2 Metres of Silicone Hose/Probe

6007/3MO2/N2O Demand Valve only with 3 Metres of Silicone Hose/Probe

6007/4MO2/N2O Demand Valve only with 4 Metres of Silicone Hose/Probe

COMFORT RANGE ("ENTONOX") REGULATOR ONLY

6010 Single Stage Medireg & Schrader - Pin Index - O2/N2O 150.00

CARRY CASES

6000-19 Comfort Range Carry Case Only (For D Size Entonox Cylinder) 95.00

6025 Carry Bag Only (For CD Size Entonox Cylinder) 65.00

6028 Carry Bag for 2 x CD Entonox Cylinders 80.00

NEW FOR OLD "ENTONOX" UNITS

COMFORT RANGE

- "ENTONOX"

6017 New for Old O2/N2O Medireg & Schrader - Pin Index 127.50 6015 New for Old O2/N2O Demand Valve with 2 Metres of PVC Hose 176.35 6016 New for Old O2/N2O Demand Valve with 2 Metres of Silicone Hose 204.00

6013 New for Old complete Comfort Range Kit (PVC Hose) 297.50

(10)

6610

FLOWMETERS

- ACCESSORIES

6600 6604 5050-02-02 6601 6741 6742

INDIRECT RAIL MOUNTING ASSEMBLIES

Complete assemblies to allow existing equipment to be Rail Mounted.

Each assembly is supplied with Indirect Block/Rail Clamp and 1.5 Metres of Hose and Probe.

HUMIDIFIERS

225cc 'Bubble Through' Humidifier.

Male thread to connect directly onto Flowmeter Outlet.

6740 Humidifier Kit (Humidifier, Tubing and Facemask) 20.50

6741 Humidifier Kit (225cc Bubble Type) - Autoclavable (Male Thread) 17.50

6746 Humidifier - Red Top Only (Male Thread) 13.00

6742 Humidifier Kit (225cc Bubble Type) - (Female Thread) 17.50

6747 Humidifier - Red Top Only (Female Thread) 13.00

6610 Indirect Rail Mounting Kit - Flowmeter - O2 (3/8 Male) 50.00 6611 Indirect Rail Mounting Kit - Flowmeter - Air (3/8 Male) 50.00

6612 Indirect Rail Mounting Kit - Therapy Suction 55.00

6615 Indirect Rail Mounting Kit - Ohmeda Suction (1/8 Male) 53.50 6619 Indirect Rail Mounting Kit - Schrader Valve - O2 (1/4 Male) 50.00

RAIL FITTING SPARES

6614 Indirect Rail Fitting Block Only - 3/8" Male 20.00

6616 Indirect Rail Fitting Block Only - 1/8 BSP Male 20.00

6618 Indirect Rail Fitting Block Only - 1/4 BSP Male 20.00

FLOWMETER/DIALREG ACCESSORIES

Old Style Flowmeter Tubing Nipple

6600 Old Style Flowmeter Tubing Nipple - Single 1.20

6600/10 Old Style Flowmeter Tubing Nipple - Pack of 10 11.40 6600/25 Old Style Flowmeter Tubing Nipple - Pack of 25 27.00 6600/50 Old Style Flowmeter Tubing Nipple - Pack of 50 51.00 Flowmeter Nebuliser Adaptor

6601 Flowmeter Nebuliser Adaptor - Single 2.15

6601/10 Flowmeter Nebuliser Adaptor - Pack of 10 20.45

Diamond Range Flowmeter Accessories

6604 Diamond Range Flowmeter Tubing Nipple - Single 3.00

6604/10 Diamond Range Flowmeter Tubing Nipple - Pack of 10 28.50 6604/25 Diamond Range Flowmeter Tubing Nipple - Pack of 25 67.50 6604/50 Diamond Range Flowmeter Tubing Nipple - Pack of 50 127.50 6604/Black Diamond Range Flowmeter Tubing Nipple (Black) - Single 3.00 9501-26 Outlet Adaptor (to convert Male Outlet on Flowmeter to Female) 3.00 Dialreg/Flowreg/Direct Dial Flowmeter Bayonet Tubing Nipple

5050-02-02 Bayonet Tubing Nipple - Single 1.20

5050-02-02/10 Bayonet Tubing Nipple - Pack of 10 11.40

(11)

9 FLOWMETERS

- DIRECT DIAL / LOW FLOW

6580

9587

9576

9502-50 6560

DIRECT DIAL FLOWMETER (DIAL-A-FLOW WITH PROBE)

Direct fitting unit with pre-set ‘dialled’ flow rates.

Is compact in design and is supplied with optional facemask/tubing hook. Each unit fully colour coded in accordance with gas being used.

Low Flow Units have Flush Flowrate (F) which is set at approximately 3 LPM. Now available calibrated for use with Oxygen or Medical Air.

OXYGEN

6560 Direct Dial Unit (0-15 LPM) - O2

(Settings: OFF/1/2/3/4/5/6/7/8/10/12/15) 71.50

6568 Direct Dial Unit (0-2.5 LPM) - O2

(Settings: OFF/0.25/0.50/0.75/1.00/1.25/1.50/1.75/2.00/2.25/2.50/F) 94.00 6561 Direct Dial Unit (0-1 LPM) - O2

(Settings: OFF/0.1/0.2/0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0/F) 94.00 6564 Direct Dial Unit (0-0.5 LPM) - O2

(Settings: OFF/0.05/0.10/0.15/0.20/0.25/0.30/0.35/0.40/0.50/F) 105.00

6557 Direct Dial Unit (0-15 LPM) - O2 with 3/8 Nut 70.50

6558 Twin Direct Dial Unit (0-15 LPM) on Back Bar with Probe - O2 165.00

6640 Rail Mounted Direct Dial Unit (0-15 LPM) - O2 122.00

6641 Rail Mounted Twin Direct Dial Unit (0-15 LPM) - O2 207.00

MEDICAL AIR

6580 Direct Dial Unit (0-15 LPM) - AIR

(Settings: OFF/1/2/3/4/5/6/7/8/10/12/15) 80.00

6645 Rail Mounted Direct Dial Unit (0-15 LPM) - AIR 130.00

OLD STYLE LOW FLOW FLOWMETERS

Precision Flowmeters with Glass Tube and Ruby Bobbin.

Accuracy ± 10% of Total Scale. Normal usage - Neonatal/Paediatric.

OLD STYLE 0-500cc Flowmeter - 1st Setting: 100cc (20cc Graduations thereafter)

6582 0-500cc Low Flow Flowmeter (Beige Body) 140.00

6583 0-500cc Low Flow Flowmeter with Probe 156.00

6630 0-500cc Low Flow Flowmeter - Rail Mounted 190.50

6592 Twin 0-500cc Low Flow Flowmeter & Probe 310.00

0-2.5 LPM Diamond Flowmeter - 1st Setting: 500cc (100cc Graduations between 0.5-2.5 LPM)

The Airguard is a hinged flap that fits to the bottom of the Air Flowmeter, and highlights to the end user that Air is being selected, thereby reducing the risk of incorrect selection (An Air Flowmeter is not included).

Fully Colour Coded range of Precision Flowmeters. The Diamond Range is supplied with a 7 Year function and Accidental Damage Warranty.

Accuracy ± 10% of Total Scale. Normal usage - Neonatal/Paediatric.

9502-50 Airguard for Diamond Range Flowmeter 13.75

6501-50 Universal Airguard for Air Flowmeter 13.75

9586 0-2.5 LPM Diamond Low Flow Flowmeter (Pink Body) 48.00

9587 0-2.5 LPM Diamond Low Flow Flowmeter with Probe 57.50

9531 0-2.5 LPM Diamond Low Flow Flowmeter - Rail Mounted 94.25

9594 Twin 0-2.5 Diamond LPM Low Flow Flowmeter & Probe 154.00

9575 0-5 LPM Diamond Low Flow Flowmeter (Beige Body) 48.00

9576 0-5 LPM Diamond Low Flow Flowmeter with Probe 57.50

9532 0-5 LPM Diamond Low Flow Flowmeter - Rail Mounted 94.25

9577 Twin 0-5 LPM Diamond Low Flow Flowmeter & Probe 154.00

0-5 LPM Diamond Flowmeter - 1st Setting: 0.5 LPM (200cc Graduations between 1-5 LPM)

DIAMOND RANGE LOW FLOW FLOWMETERS

(12)

9555 9505

9506

FLOWMETERS

- DIAMOND RANGE

The Diamond Range Flowmeter is colour coded in accordance with the gas being used, and has been designed with maximum safety in mind. It is manufactured from high strength plastics, and on certain models carries an integral Safety Valve which will vent excess pressure. The build up of Static Electricity is also minimised due to the use of specially selected materials.

THE DIAMOND RANGE FLOWMETER IS SUPPLIED WITH A 7 YEAR WARRANTY ON FUNCTION AND ACCIDENTAL DAMAGE

New 0-15 LPM Diamond Range Flowmeter with standard 3/8 'Coned' fitting Nut. 9501 0-15 LPM Diamond Range Flowmeter without Safety Valve - O2 32.50 9502 0-15 LPM Diamond Range Flowmeter without Safety Valve - Air 32.50

New 0-15 LPM Diamond Range Flowmeter with BS Standard Probe fitting. (O2 Flowmeter supplied with integral Probe that cannot be removed).

9505 0-15 LPM Diamond Range Flowmeter & Probe w/out Safety Valve - O2 42.00 9506 0-15 LPM Diamond Range Flowmeter & Probe w/out Safety Valve - Air 42.00 9510 0-15 LPM Diamond Range Flowmeter & Probe & Humidifier - O2 65.00

Full range of 'with and without' Probe Twin Diamond Flowmeters, to enable two Flowmeters to be used from one outlet. Units supplied without Probe are supplied with 3/8" Coned fitting Nut.

9550 Twin Diamond Range Flowmeters on Back Bar - O2 75.00

9551 Twin Diamond Range Flowmeters on Back Bar - Air 75.00

9555 Twin Diamond Range Flowmeters with Probe - O2 88.00

9556 Twin Diamond Range Flowmeters with Probe - Air 88.00

9557 Twin Diamond Range Flowmeters (1 x 0-15, 1 x 0-2.5 LPM) with Probe - O2 103.50 9560 Twin Diamond Range Flowmeter & Probe & 2 x Humidifiers 123.00

Standard 1.5m Hose Assembly

9620 Rail Mounted Single Diamond Range Flowmeter - O2 78.75

9621 Rail Mounted Single Diamond Range Flowmeter - Air 78.75

9625 Rail Mounted Twin Diamond Range Flowmeters - O2 123.00

9626 Rail Mounted Twin Diamond Range Flowmeters - Air 123.00

Single/Twin Diamond Range Flowmeters supplied with Rail Clamp and 1.5 metres of Hose/Indirect Probe.

FLOWMETER ACCESSORIES

SEE PAGE 8

0-15 LPM DIAMOND RANGE FLOWMETER & PROBE

0-15 LPM DIAMOND RANGE FLOWMETER WITH 3/8 NUT

TWIN 0-15 LPM DIAMOND RANGE FLOWMETERS

(13)

9211 9620

9630

11 FLOWMETERS

- DIAMOND RANGE

Single/Twin Diamond Range Flowmeters supplied with V Dovetail and 1.5 metres of Hose/Indirect Probe. O2 and Air units available. Other Hose Lengths available on request.

A variety of Metal Back Bars to suit most applications.

RAIL MOUNTED DIAMOND RANGE FLOWMETERS (Contd)

V DOVETAIL MOUNTED DIAMOND RANGE FLOWMETERS

2M Hose Assembly

9620/2MRail Mounted Single Diamond Range Flowmeter with 2M Hose - O2 80.50 9621/2MRail Mounted Single Diamond Range Flowmeter with 2M Hose - Air 80.50 9625/2MRail Mounted Twin Diamond Range Flowmeters with 2M Hose - O2 124.75 9626/2MRail Mounted Twin Diamond Range Flowmeters with 2M Hose - Air 124.75 3M Hose Assembly

9620/3MRail Mounted Single Diamond Range Flowmeter with 3M Hose - O2 84.00 9621/3MRail Mounted Single Diamond Range Flowmeter with 3M Hose - Air 84.00 9625/3MRail Mounted Twin Diamond Range Flowmeters with 3M Hose - O2 128.25 9626/3MRail Mounted Twin Diamond Range Flowmeters with 3M Hose - Air 128.25

9630 V Dovetail Single Diamond Range Flowmeter - O2 78.75

9631 V Dovetail Single Diamond Range Flowmeter - Air 78.75

9635 V Dovetail Twin Diamond Range Flowmeter - O2 123.00

9636 V Dovetail Twin Diamond Range Flowmeter - Air 123.00

FLOWMETER BACK BARS

6570 Y Back Bar with twin 3/8” Male Thread 25.00

6570-02 Y Back Bar with twin 1/4” BSP Male Thread 25.00

6570-03 Y Back Bar with 3/8” Male Thread and 1/4” BSP Male Thread 25.00

NEW FOR OLD DIAMOND RANGE FLOWMETERS

Any old Flowmeter can be used in exchange for the New Diamond Range Flowmeter. ALL NFO FLOWMETERS SUPPLIED WITHOUT SAFETY VALVE.

9211 NFO 0-15 LPM Diamond Range Flowmeter with 3/8" Nut - O2 23.00 9211/AIRNFO 0-15 LPM Diamond Range Flowmeter with 3/8" Nut - Air 23.00 9213 NFO 0-15 LPM Diamond Range Flowmeter with 3/8" Nut - O2 - 10 off 21.50 9213/AIRNFO 0-15 LPM Diamond Range Flowmeter with 3/8" Nut - Air - 10 off 21.50 9216 NFO 0-15 LPM Diamond Range Flowmeter & Probe - O2 31.50 9216/AIRNFO 0-15 LPM Diamond Range Flowmeter & Probe - Air 31.50 9217 NFO 0-15 LPM Diamond Range Flowmeter & Probe - O2 - 10 off 29.40 9217/AIRNFO 0-15 LPM Diamond Range Flowmeter & Probe - Air - 10 off 29.40 9212 NFO Twin 0-15 LPM Diamond Range Flowmeters on Back Bar - O2 63.75 9212/AIRNFO Twin 0-15 LPM Diamond Range Flowmeters on Back Bar - Air 63.75 9214 NFO Twin 0-15 LPM Diamond Range Flowmeters & Probe - O2 70.40 9214/AIRNFO Twin 0-15 LPM Diamond Range Flowmeters & Probe - Air 70.40 9218 NFO Rail Mounted Single Diamond Range Flowmeters - O2 59.50 9218/AIRNFO Rail Mounted Single Diamond Range Flowmeters - Air 59.50

9219 NFO Rail Mounted Twin Diamond Range Flowmeters - O2 92.50

9219/AIRNFO Rail Mounted Twin Diamond Range Flowmeters - Air 92.50

FLOWMETER ACCESSORIES

(14)

7720

7725 7705 7701

SUCTION

- DIAMOND RANGE

The Diamond Suction range is manufactured from high strength plastics and is colour coded to assist the end user with Suction level recognition.

Each Unit is supplied with an integral Pipeline Protector, which not only supplies 100% guaranteed protection against Pipeline Contamination, but also goes PINK

to show that the filter has been contaminated and requires changing.

All models fully comply with the latest International Standards and are CE Marked.

THE DIAMOND RANGE SUCTION UNIT IS SUPPLIED WITH A 7 YEAR WARRANTY ON FUNCTION AND ACCIDENTAL DAMAGE

DIAMOND HIGH SUCTION

0 to -625mmHG (-80kPa) Suction Range.

7701 Diamond High Suction Controller with Direct fitting probe 127.50 7702 Diamond High Suction Controller with 9/16 LH Fitting 127.50 7703 Diamond High Suction Controller with 1/8 Female Fitting 127.50 7705 Rail Mounted Diamond High Suction Controller complete with

1.5 metres of Hose and Indirect Probe 155.00

7706 V Dovetail Diamond High Suction Controller complete with

1.5 metres of Hose and Indirect Probe 155.00

7715 Complete Direct Diamond High Suction Assembly, comprising: - Direct Diamond High Suction Controller

- 1.8 Litre Polysulphone Receiver Jar Assembly - Wall Plate and fixing screws

- Suction Tubing for connecting Controller and Jar 174.00 7707 Complete Rail Mounted Diamond High Suction Assembly, comprising:

- Rail Mounted Diamond High Suction Controller - 1.8 Litre Polysulphone Receiver Jar Assembly - Wall Plate and fixing screws

- Suction Tubing for connecting Controller and Jar 200.00 7708 Complete V Dovetail Diamond High Suction Assembly, comprising:

- V Dovetail Diamond High Suction Controller - 1.8 Litre Polysulphone Receiver Jar Assembly - Wall Plate and fixing screws

- Suction Tubing for connecting Controller and Jar 200.00

DIAMOND LOW SUCTION

0 to -150mmHG (-20kPa) Suction Range. Relief Valve (full relief) set at -180mmHG. 7720 Diamond Low Suction Controller with Direct fitting probe 170.00 7721 Diamond Low Suction Controller with 9/16 LH Fitting 170.00 7725 Rail Mounted Diamond Low Suction Controller complete

with 1.5 metres of Hose and Indirect Probe 197.50

7726 V Dovetail Diamond Low Suction Controller complete

7736 Complete Direct Diamond Low Suction Assembly, comprising: - Direct Diamond High Suction Controller

- Suction Tubing for connecting Controller and Jar 216.50 7727 Complete Rail Mounted Diamond Low Suction Assembly, comprising:

- Rail Mounted Diamond Low Suction Controller - 1.8 Litre Polysulphone Receiver Jar Assembly - Wall Plate and fixing screws

- Suction Tubing for connecting Controller and Jar 242.50 7728 Complete V Dovetail Diamond Low Suction Assembly, comprising:

- V Dovetail Diamond Low Suction Controller - 1.8 Litre Polysulphone Receiver Jar Assembly - Wall Plate and fixing screws

SUCTION ACCESSORIES

(15)

7880 7740

7770

7760

13 SUCTION

- DIAMOND RANGE

DIAMOND THORACIC SUCTION

0 to -60cmH2O (-6kPa) Suction Range. Relief Valve (full relief) set at -65cmH2O. 7740 Diamond Thoracic Suction Controller with Direct fitting probe 197.50 7742 Diamond Thoracic Suction Controller with 9/16 LH Fitting 197.50 7745 Rail Mounted Diamond Thoracic Suction Controller complete

DIAMOND PACKAGE

Discounted price for the 'package' of a Diamond Suction Controller and Diamond Flowmeter.

7880 Diamond High Direct Suction and 0-15 LPM Diamond

Flowmeter and Probe (w/out Safety Valve) 160.00

7890 Diamond High Direct Suction and Twin 0-15 LPM Diamond

Flowmeter on Back Bar with Probe (w/out Safety Valve) 205.00

DIAMOND TWIN SUCTION

Different variations of Suction Controllers mounted on V Backbar. Alternative forms of mounting and Straight Backbars are available. 7765 Diamond Twin Suction Controllers (High/High) on

Straight Backbar with Direct Vacuum Probe 296.00

7770 Diamond Twin Suction Controllers (High/Low) on

7777 Diamond Twin Suction Controllers (High/Thoracic) on

7775 Rail Mounted Diamond Twin Suction Controllers (High/Low)

on Straight Backbar with 1.5m Hose/Probe 430.00

7780 Rail Mounted Diamond Twin Suction Controllers (High/High)

on Straight Backbar with 1.5m Hose/Probe 390.00

NEW FOR OLD DIAMOND SUCTION CONTROLLERS

7850 New for Old High Direct Suction Controller 89.25

7852 New for Old High Rail Mounted Suction Controller 124.00

7885 New for Old Diamond Package (Single Flowmeter) 120.00

7895 New for Old Diamond Package (Twin Flowmeter) 155.00

7860 New for Old Low Direct Suction Controller 119.00

7862 New for Old Low Rail Mounted Suction Controller 153.75

7870 New for Old Thoracic Direct Suction Controller 138.25

7872 New for Old Thoracic Rail Mounted Suction Controller 173.00

DIAMOND THEATRE SUCTION

A sturdy 3ft Trolley with 5 castor base complete with Angled Diamond High Suction Controller, 5 Metres of Vacuum Hose and Indirect Probe.

The unit has two 1.8 Litre Polysulphone Jar Assemblies and a change over valve fitted to switch flows easily between Jars.

The unit can be customised to take alternative collection Jars.

7760 Theatre Suction Unit, complete 440.00

7761 Theatre Suction Unit complete with twin Suction Controllers 545.00 7763 Theatre Suction Unit without Jars, fitted with V Brackets 387.00 7763/ABB Theatre Suction Unit without Jars, fitted with Abbots Brackets 387.00 7763/SERRESTheatre Suction Unit without Jars, fitted with Serres Brackets 387.00 7766 Theatre Suction Unit, with Single Suction Controller and

4 x Receiver Jars 502.00

7767 Theatre Suction Unit, with Single Suction Controller and

4 x V Brackets (without Jars) 395.00

7768 Theatre Suction Unit, complete with 0-15 LPM Flowmeter

(Both units supplied with 5M Hose/Probe) 510.00

(16)

4720

4725 4705 4701

SUCTION

- OLD STYLE

A comprehensive range of Suction Equipment manufactured in Polycarbonate and Polysulphone with integral probe as standard.

Each High/Low unit is fitted with a Pipeline Protector (Hydrophobic Filter) for total contamination protection of the vacuum pipeline.

The controllers are fully adjustable/controllable by a printed Control Knob and On/Off switch. All models fully comply with the latest International Standards.

ALL THERAPY EQUIPMENT SUCTION CONTROLLERS CARRY A 7 YEAR WARRANTY ON FUNCTION

HIGH SUCTION

LOW SUCTION

0 to -760mmHG Range set at -625mmHG maximum.

0 to -300mmHG Range set at -150mmHG. The unit has a relief valve set at -180mmHG.

4701 High Suction Controller with Direct fitting probe 175.00

4702 High Suction Controller with 9/16 LH Fitting 172.00

4703 High Suction Controller with 1/8 Female Fitting 172.00

4705 Rail Mounted High Suction Controller complete with 1.5 metres

of Hose and Indirect Probe 213.00

4706 V Dovetail High Suction Controller complete with 1.5 metres

4715 Complete Direct High Suction Assembly, comprising: - Direct High Suction Controller

- Suction Tubing for connecting Controller and Jar 219.00 4707 Complete Rail Mounted High Suction Assembly, comprising:

- Rail Mounted High Suction Controller - 1.8 Litre Polysulphone Receiver Jar Assembly - Wall Plate and fixing screws

- Suction Tubing for connecting Controller and Jar 254.00 4708 Complete V Dovetail High Suction Assembly, comprising:

- V Dovetail High Suction Controller

4720 Low Suction Controller with Direct fitting probe 225.00

4721 Low Suction Controller with 9/16 LH Fitting 222.00

4725 Rail Mounted Low Suction Controller complete with 1.5 metres

4726 V Dovetail Low Suction Controller complete with 1.5 metres

4735 Complete Direct Low Suction Assembly, comprising: - Direct High Suction Controller

- Suction Tubing for connecting Controller and Jar 275.00 4727 Complete Rail Mounted Low Suction Assembly, comprising:

- Rail Mounted Low Suction Controller - 1.8 Litre Polysulphone Receiver Jar Assembly - Wall Plate and fixing screws

- Suction Tubing for connecting Controller and Jar 310.00 4728 Complete V Dovetail Low Suction Assembly, comprising:

- V Dovetail Low Suction Controller

(17)

4760 4765 4740

15 SUCTION

- OLD STYLE

NEW FOR OLD SUCTION CONTROLLERS

A sturdy 3ft Trolley with 5 castor base complete with Angled High Suction Controller, 5 Metres of Vacuum Hose and Indirect Probe.

The unit has two 1.8 Litre Polysulphone Jar Assemblies and a change over valve fitted to switch flows easily between Jars.

The unit can be customised to take alternative collection Jars.

4850 New for Old High Direct Suction Controller 122.50

4852 New for Old High Rail Mounted Suction Controller 149.10

4860 New for Old Low Direct Suction Controller 157.50

4862 New for Old Low Rail Mounted Suction Controller 184.10

4870 New for Old Thoracic Direct Suction Controller 189.00

THEATRE SUCTION

4760 Theatre Suction Unit, complete 490.00

4761 Theatre Suction Unit complete with twin Suction Controllers 625.00

4763 Theatre Suction Unit without Jars 435.00

4763/ABB Theatre Suction Unit without Jars, fitted with Abbots Brackets 435.00 4763/SERRESTheatre Suction Unit without Jars, fitted with Serres Brackets 435.00 4766 Theatre Suction Unit, with Single Suction Controller and

4 x Receiver Jars 545.00

4767 Theatre Suction Unit, with Single Suction Controller and

4 x V Brackets (without Jars) 445.00

4768 Theatre Suction Unit, complete with 0-15 LPM Flowmeter

(Both units supplied with 5M Hose/Probe) 560.00

THORACIC SUCTION

0 to -40cmH2O Range set at -38cmH2O. Relief valve set at -45cmH2O.

4740 Thoracic Suction Controller with Direct fitting probe 270.00

4742 Thoracic Suction Controller with 9/16 LH Fitting 267.00

4745 Rail Mounted Thoracic Suction Controller complete with 1.5

metres of Hose and Indirect Probe 305.00

TWIN SUCTION

Different variations of Suction Controllers mounted on V Backbar. Alternative forms of mounting and Straight Backbars are available. 4765 Twin Suction Controllers (High/High) on V Backbar

with Direct Vacuum Probe 390.00

4770 Twin Suction Controllers (High/Low) on V Backbar

with Direct Vacuum Probe 415.00

4775 Rail Mounted Twin Suction Controllers (High/Low)

on V Backbar with 1.5m Hose/Probe 480.00

4780 Rail Mounted Twin Suction Controllers (High/High)

on V Backbar with 1.5m Hose/Probe 435.00

PIPELINE PROTECTORS SHOULD NOT BE USED

WITH OLD STYLE THORACIC SUCTION

(18)

4475 4425 4455 SUCTION ACCESSORIES SEE PAGE 18 4460

SUCTION

- INJECTOR

“TEK 2000” (EMERGENCY SUCTION KITS)

A portable Suction and Oxygen Therapy Kit run from a gas cylinder. Ideal for emergency situations or for use on Theatre transport trolleys.

Miniature Injector Suction Unit (On/Off Only) is set to draw a maximum of -575mmHG. As the unit is designed for emergency use, the suction unit does not have a fitted Pipeline Protector. Oxygen Usage: 40 LPM.

4475 Pin Index TEK 2000 Emergency Suction Kit, comprising: - TEK 2000 Emergency Suction Unit

- 0-15 LPM Dialreg with 3/8” Outlet - Pin Index - 1/2 Litre Suction Jar and Connection Tubing

- Bed End Cradle to carry complete kit 385.00

4485 Bullnose TEK 2000 Emergency Suction Kit, comprising:

- Contents as 4475 except Bullnose Dialreg 360.00

4455 TEK 2000 Emergency Suction Unit with 3/8” Nut Only 140.00

4457 Emergency Injector Suction Unit with O2 Direct Probe 155.00

5058/4455 0-15 LPM Pin Index Dialreg with Emergency Injector Suction Unit 290.00

5053/4455 0-15 LPM Bullnose Dialreg with Emergency Injector Suction Unit 265.00 4495 Complete Pin Index TEK 2000 in Carry Case

- Special 'Swivel' Pin Index Dialreg (0-15 LPM) - Emergency Injector Suction Unit

- 1/2 Litre Jar, Oxygen and Suction Tubing 465.00

4460 Rail Mounted 0-15 LPM Direct Dial Flowmeter/Emergency Injector Suction Unit, and angled O2 Schrader Valve

complete with 1.5m Hose/Probe 260.00

4462 Rail Mounted 0-15 LPM Flowmeter/Emergency Injector Suction Unit, and angled O2 Schrader Valve

complete with 1.5m Hose/Probe 244.00

4465 Rail Mounted 0-15 LPM Flowmeter/Emergency Injector

Suction Unit complete with 1.5m Hose/Probe 206.00

4467 Rail Mounted 0-15 LPM Direct Dial Flowmeter/Emergency

Injector Suction Unit complete with 1.5m Hose/Probe 230.00 A range of equipment allowing the generation of Suction from a pressure source. The maximum suction generated is in excess of -525mmHG with a flow of gas less than 20 LPM. Features include:

- The routing of the suction via a Pipeline Protector to avoid contamination. - Pressure relief valve fitted. Fully conforms to latest International Standards.

4450 Injector Suction Unit Only 215.00

4451 Injector Suction Unit (No Probe) - Straight through Valve 215.00

4452 Injector Suction Unit with Direct Oxygen Probe 227.50

4425 Rail Mounted Injector Suction/Flowmeter Assembly

complete with 1.5 Metres of Hose and Indirect Probe 283.00 4427 Complete Injector Suction/Flowmeter Assembly:

- Rail Mounted Injector Suction/Flowmeter Unit - Bullnose Medireg & Schrader - O2

- 1/2 Litre Jar and Holder

- Suction Tubing for connecting Injector Suction to Jar 410.00 4430 Injector Suction/Flowmeter Unit for fitting direct to Regulator 245.00

(19)

4280 4550

4260

17 SUCTION

- SOS UNIT / ELECTRIC SUCTION

A modern range of Electric Suction Units with a lightweight plastic case Features include:

- Fully adjustable vacuum without venting to atmosphere.

- Hydrophobic Filter giving total contamination protection to the motor. Available with High Suction only in the form Mains and Mains/Battery Model. 4260 240V Electric High Suction Unit - Single Jar - Castors & Handle 610.00 4261 240V Electric High Suction Unit - Twin Jars - Castors & Handle 650.00 4262 240V Electric High Suction Unit - Without Jar - Castors & Handle 578.00 4263 240V Electric High Suction Unit - Abbots Bracket - Castors & Handle 588.50 4268 240V Electric High Suction Unit - Twin V Bracket - Castors & Handle 588.50 4264 240V Electric High Suction Unit - Single Jar - Freestanding 564.00 4265 240V Electric High Suction Unit - Twin Jars - Freestanding 636.50 4266 240V Electric High Suction Unit - Without Jar - Freestanding 562.00 4267 240V Electric High Suction Unit - Abbots Bracket - Freestanding 572.75 4269 240V Electric High Suction Unit - Twin V Bracket - Freestanding 572.75

MAINS/BATTERY SUCTION

4280 Electric/Battery High Suction Unit - Single Jar - Castors & Handle 880.00 4281 Electric/Battery High Suction Unit - Twin Jars - Castors & Handle 920.00 4282 Electric/Battery High Suction Unit - Without Jar - Castors & Handle 848.00 4283 Electric/Battery High Suction Unit - Abbots Brkt - Castors & Handle 858.50 4284 Electric/Battery High Suction Unit - Single Jar - Freestanding 864.00

Any old Electric Suction Unit can be used in exchange for new Electric Suction Units 4211 NFO High Electric Suction Unit - Single Jar - Castors & Handle 518.50 4212 NFO High Electric Suction Unit - Twin Jars - Castors & Handle 552.50 4213 NFO High Electric Suction Unit - Without Jar - Castors & Handle 491.00 4214 NFO High Electric Suction Unit - Abbots Bracket - Castors & Handle 500.20 4216 NFO High Electric Suction Unit - Single Jar - Freestanding 479.40 4218 NFO High Electric/Battery Suction Unit - Single Jar - C & H 748.00

NEW FOR OLD ELECTRIC SUCTION UNITS

ELECTRIC SUCTION

THERAPY SOS UNIT

Brand New for 2016, the Therapy SOS (Suction Oxygen System) is a neat fully integrated Oxygen and Suction supply device, which is normally powered from an Oxygen Gas Cylinder. It is ideal for all Patient Transfer and Resuscitation Trolleys, or anywhere within a medical environment where piped oxygen or vacuum is unavailable. The unit can be supplied with a variety of fixtures, and carries a 7 Year Function Warranty. The unit is CE Marked, and fully conforms to British Standard. The standard unit is supplied with a 1.5 Metre Hose, however other lengths are available on request.

Standard 1.5M Hose Assembly

4550 Rail Clamp Mounted Therapy SOS Unit 250.00

4555 Rail Clamp Mounted Therapy SOS Unit for Huntleigh Trolleys 250.00 4560 Pole Clamp Mounted Therapy SOS Unit (Horizontal Pole) 300.00 4565 Pole Clamp Mounted Therapy SOS Unit (Vertical Pole) 300.00

4570 V Dovetail Mounted Therapy SOS Unit 250.00

(20)

4800

4260-05

4315/4302

SUCTION

- ACCESSORIES

Self contained Hydrophobic Filter which prevents any passage of liquid. This guarantees total protection of the hospital pipeline.

Suggested change: High Usage Area - Every 3 months; Low Usage Area - Annually Or variable depending on hospital infection control policy.

4900 Bayonet Pipeline Protector (Therapy Suction) - Pack of 10 32.00 4901 Threaded Pipeline Protector (East/Old Ohmeda) - Pack of 10 60.00 4902 Small Pipeline Protector (Ohmeda Intl/Electric Suction) - Pack of 10 50.00

7900 Diamond Suction Pipeline Protector - Pack of 10 35.00

4903 Bacteriological In-Line Disc Filter - Pack of 24 (Non-Hydrophobic) 120.00

PIPELINE PROTECTORS ( HYDROPHOBIC FILTERS)

Generally for use with Injector Suction.

Does not have a float however is fully autoclavable. 4507 1_/

2Litre Suction Jar 40.00

4506 1_/

2Litre Suction Jar Holder (Wall Mounted) 20.00

4508 1_/

2Litre Suction Jar and Wall Mounted Holder 60.00

4509 1_/

2Litre Suction Jar and Rail Mounted Holder 65.00

1

_/

2

LITRE SUCTION JARS

Manufactured for use with the Therapy Equipment Jar (cannot be used with other Jars) Features include:

- Non Return Valve on Patient inlet.

- Hydrophobic Filter to prevent effluent passing to controller. - Filter Cap allowing full use of the liner before valve shut off. - The unit is fully sealable after use.

4807 Disposable Jar Liner (Standard) - 1.8 Litre - Box of 50 325.00

DISPOSABLE JAR LINER

1.8 LITRE RECEIVER JARS

Manufactured in fully autoclavable Polysulphone with integral ‘V’ Socket. The lid is a ‘pressure cooker’ type bayonet fitting onto a silicone seal.

Features are that it can be used as a re-usable jar or in conjunction with a Therapy Equipment Disposable Jar Liner.

4800 1.8 Litre Polysulphone Jar Assembly complete 50.00

SUCTION ACCESSORIES

4302 Plastic Suction Tubing (30 Metre Coil) 31.50

4315 Yellow Plastic Suction Tubing (30 Metre Coil) 31.50

4260-05 Plastic V Bracket 5.50

4505 Plastic V Dovetail 7.50

4510 Abbots Bracket (Parallel) 5.50

4701-12 Microbiological Filter for Thoracic Suction Unit 4.50

4701-09 Filter Jar Only - Thoracic Suction Unit 8.50

4701-68 Complete Filter Bowl Assembly - Thoracic Suction Unit 22.50 4760-02 New/Replacement Changeover Valve for Theatre Suction Unit 50.00

4504 Suction Connector Taper 2.50

4260-60 Serres Jar Adaptor 9.00

4305 1m Yellow Tubing/Connector (Pack of 10) 32.50

4900

4902 4903 7900

(21)

8750-20/24 8750-03

8650 8700/8706

19 SUNDRIES

- HOSE ASSEMBLIES

A complete range of coloured anti-static hoses designed to identify the gas being used. All hose is now Phthalate Free and Anti-Microbial.

8700 White - O2 metre 3.50

8701 Yellow - Vacuum metre 3.50

8702 Black - Air metre 3.50

8703 Blue - N2O metre 3.50

8706 Blue/White - N2O/O2 (“Entonox”) metre 4.00

HIGH PRESSURE ANTI STATIC HOSE (PIPELINE HOSE)

NIST Connector - Specified length of Hose - Gas Distinct Probe.

4 Metre 3 Metre 2 Metre

Part No. Price Part No. Price Part No. Price

Oxygen 8650 £55.00 8650/3M £52.00 8650/2M £49.00

4 Bar Air 8651 £55.00 8651/3M £52.00 8651/2M £49.00

7 Bar Air 8652 £55.00 8652/3M £52.00 8652/2M £49.00

Vacuum 8653 £55.00 8653/3M £52.00 8653/2M £49.00

N2O 8654 £55.00 8654/3M £52.00 8654/2M £49.00

NIST/PROBE HOSE ASSEMBLY

1/8" BSP Male Connector - Specified length of Hose - Gas Distinct Probe. Suitable for replacing Hose Assemblies on Rail Mounted Equipment and Theatre Suction Units.

6660 1.5m Replacement Hose for O2 Rail Mounted Flowmeter 33.00

6660/2M2m Replacement Hose for O2 Rail Mounted Flowmeter 35.00 6662 1.5m Replacement Hose for Air Rail Mounted Flowmeter 33.00 6662/2M2m Replacement Hose for Air Rail Mounted Flowmeter 35.00 4701-79 1.5m Replacement Hose for Rail Mounted Suction Unit 37.50 4701-89 2m Replacement Hose for Rail Mounted Suction Unit 39.50 4701-99 5m Replacement Hose for Theatre Suction Unit 45.00

1/8" BSP MALE / PROBE HOSE ASSEMBLY

FERRULES

8750-01 Narrow Bore Ferrule (Medipart) 1.25

8750-03 Wide Bore Ferrule (Therapy Equipment Hose) 0.70

HOSE SLEEVING

8750-20 Printed Heat Shrink Sleeve - O2 1.40

8750-21 Printed Heat Shrink Sleeve - 4 Bar Air 1.40

8750-22 Printed Heat Shrink Sleeve - Vacuum 1.40

8750-23 Printed Heat Shrink Sleeve - N2O 1.40

8750-24 Printed Heat Shrink Sleeve - 7 Bar Air 1.40

DISS Connector - Specified length of Hose - Gas Distinct Probe.

4 Metre 3 Metre 2 Metre

Part No. Price Part No. Price Part No. Price

Oxygen 8660 £55.00 8660/3M £52.00 8660/2M £49.00

Air 8661 £55.00 8661/3M £52.00 8661/2M £49.00

Vacuum 8663 £55.00 8663/3M £52.00 8663/2M £49.00

N2O 8662 £55.00 8662/3M £52.00 8662/2M £49.00

(22)

8850

8855

8870 8823/8827

8801

SUNDRIES

- TROLLEYS & CRADLES

CYLINDER TROLLEYS

A full range of sturdy powder coated metal trolleys designed to carry a single cylinder

Rings and Brackets are available for securing cylinders against a wall.

Cylinder Cradles manufactured in white plastic coated Metal.

Catheter Holders manufactured in white plastic coated wire.

8800 Cylinder Trolley - J Size (240 cu ft) 225.00

8801 Cylinder Trolley - G Size (120 cu ft) 145.00

8802 Cylinder Trolley - F Size (48 cu ft) (Suitable for HX Cylinder) 130.00

8803 Cylinder Trolley - E Size (24 cu ft) 102.50

8805 Cylinder Trolley - Dumpy F Size 115.00

CYLINDER RINGS AND BRACKETS

8822 Cylinder Wall Bracket Only 29.00

8823 Cylinder Ring - Size C 30.00

8824 Cylinder Ring - Size D/E 30.00

8825 Cylinder Ring - Size F (Suitable for HX Cylinder) 30.00

8826 Cylinder Ring - Size G 30.00

8827 Cylinder Ring - Size J 30.00

CYLINDER BRACKET AND CHAIN

8849 Cylinder Cradle - Bed End - Size C 55.00

8850 Cylinder Cradle - Bed End - Size D 55.00

8851 Cylinder Cradle - Bed End - Size E 61.00

8858 Cylinder Cradle - Bed End - Size CD 60.50

8854 Cylinder Cradle - Wall Fix - Size C 55.00

8855 Cylinder Cradle - Wall Fix - Size D 55.00

8856 Cylinder Cradle - Wall Fix - Size E 61.00

8863 Cylinder Cradle - Wall Fix - Size CD 60.50

8859 Cylinder Cradle - Rail Mounted - Size C 60.00

8860 Cylinder Cradle - Rail Mounted - Size D 60.00

8861 Cylinder Cradle - Rail Mounted - Size E 67.00

8862 Cylinder Cradle - Rail Mounted - Size CD 66.50

CATHETER HOLDERS

8870 Large Catheter Holder 50.00

8871 Small Catheter Holder 45.00

2519 Rail Mounted Large Catheter Holder 57.00

Cylinder Wall Bracket with fixed metal chain for securing all sizes of floor mounted cylinders against a wall.

8865 Cylinder Wall Bracket with Chain 60.00

(23)

21 SUNDRIES

- PROBES

8511 8600 8550 8570 8501

PROBES

Mark 4 British Standard Probes, with Gas Distinct ‘collar’ to British Standard.

Probes for use with ‘Draeger’ type outlets.

Probes for use with ‘Puritan Bennett’ type outlets.

NIST (Non Interchangeable Standard Thread) is a complete range of Gas Distinct fittings designed to avoid the possibilities of incorrect connection.

8501 O2 Probe - 3/8 BSP Male 16.50

8501-01 O2 Probe - 1/8 NPT Male 16.50

8501-02 O2 Probe - 1/8 BSP Male 16.50

8502 MA4 (4 Bar Air) Probe - 3/8 BSP Male 16.50

8502-01 MA4 (4 Bar Air) Probe - 1/8 BSP Male 16.50

8502-02 MA4 (4 Bar Air) Probe - 1/8 NPT Male 16.50

8503 MA7 (7 Bar Air) Probe - 3/8 BSP Male 16.50

8503-01 MA7 (7 Bar Air) Probe - 1/8 BSP Male 16.50

8504 Vacuum Probe - 3/8 BSP Male 16.50

8505 N2O Probe - 3/8 BSP Male 16.50

8506 Vacuum Probe with Left Hand Running Nut (BOC) 27.50

8510 O2 Probe - Indirect 17.50

8511 MA4 (4 Bar Air) Probe - Indirect 17.50

8512 MA7 (7 Bar Air) Probe - Indirect 17.50

8513 Vacuum Probe - Indirect 17.50

8514 N2O Probe - Indirect 17.50

8515 O2/N2O ("Entonox") Probe - Indirect 17.50

MARK 1 PROBES

(Right Angled Probes)

8530 Mark 1 O2 Probe - Direct 49.00

8532 Mark 1 Vacuum Probe - Direct 49.00

DRAEGER PROBES

8550 O2 Draeger Probe - Direct 35.75

8551 MA4 (4 Bar Air) Draeger Probe - Direct 35.75

8552 Vacuum Draeger Probe - Direct 47.50

8555 O2 Draeger Probe - Indirect 35.75

8556 MA4 (4 Bar Air) Draeger Probe - Indirect 35.75

8557 Vacuum Draeger Probe - Indirect 35.75

PURITAN BENNETT PROBES

8570 O2 Puritan Bennett Probe - Direct 35.60

8571 MA4 (4 Bar Air) Puritan Bennett Probe - Direct 35.60

8572 Vacuum Puritan Bennett Probe - Direct 47.50

8573 O2 Puritan Bennett Probe - Indirect 35.60

8574 MA4 (4 Bar Air) Puritan Bennett Probe - Indirect 35.60

8575 Vacuum Puritan Bennett Probe - Indirect 35.60

NIST NUT AND NIPPLE (PIPELINE)

8600 NIST Nut and Nipple - O2 24.00

8601 NIST Nut and Nipple - 4 Bar Air 24.00

8602 NIST Nut and Nipple - 7 Bar Air 24.00

8603 NIST Nut and Nipple - Vacuum 24.00

(24)

2011/2002

2003

2004 2120

RAIL

- RAIL SYSTEM & CLAMPS

THERAPY EQUIPMENT RAIL 2000 SYSTEM

A single extruded aluminium section designed to fit directly to the wall, without the requirement for additional mounting brackets and fixing kits.

Most types of Rail Clamp can be used and the rail is suitable for both General and Heavy Duty Purposes.

The Rail is supplied cut into lengths of up to 3 Metres, inclusive of all trim, infill and caps and Wall Fixings (there are no extras).

2120 3 Metre Rail Pack, including: - 3 Metres Rail

- 6 Metres Featheredge Rail Trim - 3 Metres Blue Facing Strip - 8 Fixing Screws

- 2 End Caps 105.00

2120/0.5 0.5 Metre Rail Pack inclusive 20.00

2120/0.8 0.8 Metre Rail Pack inclusive 30.50

2120/1 1 Metre Rail Pack inclusive 37.50

2120/2 2 Metre Rail Pack inclusive 72.50

Rail can be supplied cut to any length required -

A £2.50 per length cutting charge will apply. Lengths in excess of 3 Metres will require a Joining Kit

2120-01 Rail Only (3 Metre Length) 93.50

2120-02 Featheredge Rail Trim (3 Metre Length) 6.00

2120-03 Blue Facing Strip (3 Metre Length) 4.50

2120-04 End Caps (Pair) 6.00

2120-05 Joining Kits (2 Tubes) 3.00

WALL FIXINGS

2130 Standard Screw and Raw Plug 2.50

2131 Spring Toggle and Screw 3.50

RAIL CLAMPS

2001 Universal Rail Clamp - 22mm 8.00

2002 Universal Rail Clamp - 44mm (Horizontal Holes) 8.50

2050 Universal Rail Clamp - 44mm (Vertical Holes) 8.50

2003 Universal Rail Clamp with V Bracket 17.00

2004 Universal Rail Clamp with General Purpose Hook 18.00

2005 Universal Rail Clamp with Block for 9.5mm Peg 18.00

2006 Universal Rail Clamp with Block for 12.5mm Peg 18.00

2009 Universal Rail Clamp - 38mm (Countersunk Holes) 9.00

2011 Universal Rail Clamp - 17mm (Countersunk Holes) 8.00

2003/ABB Universal Rail Clamp with Abbots Bracket 17.00

(25)

2923 2518 2522

23 RAIL

- RAIL MOUNTED EQUIPMENT

All Rail Mounted equipment is supplied with a Rail Clamp, and is ready for attaching directly to the Rail. For equipment that requires a gas/vacuum supply, 1.5 Metres of Hose and Indirect Probe is supplied.

A fully adjustable A2 size Chart Holder complete with holding clips and a retaining bar on the bottom. The Chart Holder is vertical when not in use, and can be pulled into a working position and locked into place. The height of the Chart Holder is also fully adjustable.

7705 Rail Mounted Diamond High Suction Controller 155.00

7725 Rail Mounted Diamond Low Suction Controller 197.50

4705 Rail Mounted ‘Old Style’ High Suction Controller 213.00

4725 Rail Mounted ‘Old Style’ Low Suction Controller 263.00

9620 Rail Mounted Single Diamond Range Flowmeter - O2 78.75

9621 Rail Mounted Single Diamond Range Flowmeter - Air 78.75

9625 Rail Mounted Twin Diamond Range Flowmeters - O2 123.00

9626 Rail Mounted Twin Diamond Range Flowmeters - Air 123.00

6640 Rail Mounted 0-15 LPM Direct Dial Flowmeter - O2 122.00

6641 Rail Mounted 0-15 LPM Twin Direct Dial Flowmeter - O2 207.00

6130 Rail Mounted Single Schrader Valve - O2 86.00

6131 Rail Mounted Single Schrader Valve - MA4 86.00

6132 Rail Mounted Single Schrader Valve - Vacuum 86.00

6120 Rail Mounted Twin Schrader Valve - O2 169.00

6121 Rail Mounted Twin Schrader Valve - MA4 169.00

6123 Rail Mounted Twin Schrader Valve - Vacuum 169.00

2501 Rail Mounted Mercurial Sphygmomanometer Only 85.00

2521 Rail Mounted 6” Aneroid Sphygmomanometer Only 80.00

2502 Rail Mounted Sphygmomanometer Cuff Holder 52.00

2503 Rail Mounted Mercurial Sphygmomanometer & Cuff Holder 130.00 2522 Rail Mounted 6” Aneroid Sphygmomanometer & Cuff Holder 129.50

2505 Rail Mounted Lamp 140.00

2514 Rail Mounted Notes Rack 50.00

2516 Rail Mounted Single Drip Stand 108.00

2524 Rail Mounted Drip Stand with 4 Hook Boom 257.00

2518 Rail Mounted Bowl 50.00

2519 Rail Mounted Large Catheter Basket 57.00

2750 Rail Mounted 3/4” Tube with twin extended Rail Clamps 200.00

2527 Rail Mounted Plastic Catheter Quiver 50.00

CHART TABLES

(26)

REPAIRS

- RECONDITIONING

E

R

P

A

I

R

S

It is the policy of Therapy Equipment to only offer a reconditioning service on our own equipment:

- Mediregs.

- Flowregs.

- Dialregs.

- Entonox Mediregs. - Entonox Demand Valves.

Whilst we offer a damage repair service (items within 7 years old), we do not offer a reconditioning service on Suction equipment or Flowmeters. We do not offer a repair service on Suction or Flowmeters over 7 years old, or undated.

All other products sent in for repair, including old style Regulators (S60, S400M and Series 90) and other manufacturer’s Suction and Flowmeters will, unless otherwise advised, be treated as New for Old.

MEDIREG RANGE

Full Workshop Overhaul after 4-year warranty:

All internal seals and High Pressure Valve Seating are replaced, and the unit returned to the Hospital, with a renewed 4 year warranty.

Every effort will be made to replace all damaged parts within the price, however should new Gauges or Metering Drums be required, these will be charged separately.

It is recommended that the Regulator be reconditioned a maximum of 2 times, giving the unit a maximum 12 year life. Units returned for reconditioning beyond 12 years old will not be reconditioned, and a New for Old replacement offered.

Please Note: All Medireg Range equipment returned for damage repair will automatically be reconditioned.

Medireg inclusive of parts 53.00

Dialreg inclusive of parts 54.50

Flowreg inclusive of parts 56.50

Comfort Range "Entonox" Medireg inclusive of parts 53.00

COMFORT RANGE ("ENTONOX")

Full Workshop Overhaul after 3-year warranty:

The Valve Seating and Seals are replaced, and the unit returned to the Hospital, with a renewed 3 Year Warranty. The price includes the

reconditioning of the Entonox Demand Valve only, and the replacement Hose Assembly will be charged separately.

Please Note: The Demand Valve should be fully decontaminated prior to returning. Any unit found contaminated will be returned un-reconditioned.

Demand Valve (Does not include Hose Replacement) inclusive of parts 45.00 We reserve the right to adjust the price, if the unit is substantially damaged