8 overhead Technical Datasheet Pack

(1)

8 overhead

Technical Datasheet Pack

Issue No: 7

(2)

Click on the links below to access the required technical datasheet.

Click on the Uniline logo to return to this page.

Old Part Number New Part Number Datasheet Number Contents - -

-Typical Uni-8 Overhead System - - 1134

8mm Hex Swage Tensioner - 5kN U8T0402-5 7234017 0921

8mm Hex Swage Toggle U8S0403 7234011 0906

8mm Hex Swage Joiner U8S0404 7234012 0917

Uni-8 Overhead Bracket U80408 7241067 0923

8mm 1x19 SS Cable Per M U80802 7241072 0925

Uni-8 Overhead Traveller UG0820A 7241074 0919

UniEye UE0100A 7234033 0837

Wall Fixing Plate UP0112A 7234021 0840

Uni-8 Energy Absorber UA0600 7241073 0866

Cable ID Tag 082-218-600 7241135 1096

(3)

B

A

C

E

G

H

F

D

I

Min Ground Clearance (m) / Min. vrije valruimte (m) / Distancia minima hasta el suelo (m) / Mindestabstand zum Boden (m) / Hauteur libre minimale (m) / Altura mínima livre (mt) / Distanza libera minima da terra (m) / Min. höjd ovanför marken Installation Date / Installatiedatum / Fecha de instalación / Montagedatum / Date d'installation / Data da instalação / Data installazione / Installationsdatum Installed By / Geïnstalleerd door / Instalado Por / Montiert durch / Installateur / Instalado por / Installato da / Installerad av Contact Number / Contactnr. / Tel. de contacto / Kontakttelefon / Téléphone / Nº de Contacto / Numero contatto / Kontaktnummer Next Service Date / Datum volgende keuring / Próxima fecha de revisión / Termin der nächsten Wartung / Prochaine date d’entretien / Data da próxima Inspecção / Data prossima manutenzione / Nästa servicedatum System Serial No / Serienummer / Número de serie del sistema / Seriennummer des Systems / Numéro de série / Nº de série do sistema / N. di serie sistema / Systemets serienr. Max Users Per Span / Max. aantal gebruikers per overspanning / Máximo de usuarios por vano / Höchstzahl der Benutzer pro Spannweite / Nombre maximal d’utilisateurs par portée / Nº máximo de utilizadores por vão / N. utenti max. per sezione / Max. användare per skena Max Users Per System / Max. aantal gebruikers per systeem / Máximo de usuarios por sistema / Maximale Benutzer pro System / Nombre maximal d’utilisateurs par système / Nº máximo de utilizadores por linha / N. utenti max. per sistema / Max. användare per system www.capitalsafety.com EN795:1996 Class C OSHA COMPLIANT AS/NZS 1891.2Use Energy Absorbing Lanyards / Gebruik energie-absorberende verbindingslijnen / Utilice acolladores de absorción de energía / Verwenden Sie falldämpfende Sicherheits-/Anschlagseile / Utilisez des longes à absorption d’énergie / Usar cordas com amortecedor de energia / Utilizzare funi ad assorbimento d’energia / Använd energiupptagande taljerep

horizontalsystems

cable

Not applicable to Rail Systems

Technical Datasheet No: 1134

Typical Uni-8 Overhead System

System Specifi cation

Fasteners for ﬁ xing to the structure are not supplied.

For more detailed component information refer to the individual datasheets.

Material Stainless Steel Components Throughout

Finish Natural/Electropolished

Quality ISO 9001

Conformity EN 795 Class C, OSHA Compliant, ANSI Z359.1, AS/NZS 1891.2

A Wall Fixing Plate (7234021)

B UniEye (7234033)

C Uni-8 Energy Absorber (7241073)

D 8mm Hex Swage Tens-5kN (7234017)

E Uni-8 Overhead Bracket (7241067)

F Uni-8 Overhead Traveller (7241074)

G 8mm 1x19 SS Cable (7241072)

H 8mm Hex Swage Toggle (7234011)

I Cable ID Tag (7241135) MAX 30m (100ft)

(4)

A

B

C

D

E

F

G

Technical Datasheet No: 0921

8mm Hex Swage Tensioner - 5kN

Part No: 7234017

*Order Separately.

A Clevis Pin B Cotter Pin

C Tension Indicator Disc D Tension Adjuster

E Tension Adjuster Lock Nut F Hex Swage Stud G 8mm 1x19 or 7x7

Stainless Steel Cable*

The tensioner unit is attached to the anchor point using the clevis pin and cotter pin. It is used to set the tension of the cable in horizontal applications. Refer to installation instructions for information on assembly and installation.

For use with 8mm 1x19 or 7x7 wire only. 19kN max permitted cable tension, min break strength 38kN.

Component Specifi cation

Application

Material 316 Stainless Steel

Finish Natural

Weight 0.85kg (1.87lbs)

(5)

Technical Datasheet No: 0906

8mm Hex Swage Toggle

Part No: 7234011

Used to hold the cable fi rmly in place at one end of the system. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation.19kN max permitted arrest load, min break strength 38kN.

Component Specifi cation

Application

Finish Natural Weight 0.33kg (0.73lbs) Quality ISO 9001 30mm (1.18”) Ø12.7mm (0.5”) 28mm (1.10”) 18mm (0.71”) 82mm (3.23”) 179mm (7.05”) 79mm (3.11”) Ø12.5mm (0.63”) Before Swagging

(6)

A

B

A

Technical Datasheet No: 0917

8mm Hex Swage Joiner

Part No: 7234012

Used to join two sections of cable together. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation. 19kN max permitted cable tension, min break strength 38kN.

Component Specifi cation

Application

Finish Natural Weight 0.12kg (0.26lbs) Quality ISO 9001 A 8mm 1x19 or 7x7 Stainless Steel Cable* B 8mm Hex Swage Joiner *Order Separately. 190mm (7.48”) befor e swaging 200mm (7.87”) after swaging 83.4mm (3.28”)

(7)

Technical Datasheet No: 0923

Uni-8 Overhead Bracket

Part No: 7241067

For use as an intermediate bracket in Uni8 Overhead systems.

Component Specifi cation

Application

Finish Electropolished Weight 0.37kg (0.82lbs) Quality ISO 9001 70mm (2.76”) Ø9mm (0.35”) Ø12.5mm (0.49”) Ø12mm (0.47”) 80mm (3.15”) 76mm (2.99”) 285mm (11.22”)

(8)

Technical Datasheet No: 0925

8mm 1x19 SS Cable Per M

Part No: 7241072

For use on vertical and Uni-8 Overhead systems. Minimum breaking strength 45.5kN (10228.8lbf).

Component Specifi cation

Application

Finish Natural

Weight 0.32kg/m (0.2lbs/ft)

(9)

C

B

A

Technical Datasheet No: 0919

Uni-8 Overhead Traveller

Part No: 7241074

A Body B Wheels C Rivets

Casting Wheels Rivets

Material 17-4 Stainless Steel 316 Stainless Steel 17-4 Stainless Steel

Finish Electropolished Machined Machined

Weight 0.71kg (1.57lbs)

Component Specifi cation

Application

For use as a non-removable traveller in Uni-8 Overhead systems. Connector not included. Minimum breaking strength 22.2kN (5000 lbf).

Ø18mm (0.71”)

34.1mm (1.34”)

114mm (4.49”)

70mm (2.76”)

(10)

B

A

B

C

Technical Datasheet No: 0837

UniEye

Part No: 7234033

The UniEye is designed as a multipurpose single point anchor and end anchor for Uniline horizontal systems. Ultimate load in direction A - 96kN (21582lbf).

Ultimate load in direction B - 67kN (15062lbf). DO NOT LOAD IN DIRECTION C

Component Specifi cation

Application

Finish Electropolished Weight 0.57kg (1.26lbs) Quality ISO 9001 Ø75mm (2.95”) 34mm (1.34”) 99mm (3.90”) 8mm (0.31”)

(11)

Technical Datasheet No: 0840

Wall Fixing Plate

Part No: 7234021

Used in conduction with UniEye or other anchor point to spread the load back to the structure. Minimum breaking strength 41.65kN (9363.29lbf).

Component Specifi cation

Application

Finish Electropolished Weight 1.84kg (4.1lbs) Quality ISO 9001 Ø16mm (0.63”) Ø13mm (0.51”) 250mm (9.84”) 75mm (2.95”) 12mm (0.47”) 42mm (1.65”)

(12)

Technical Datasheet No: 0866

Uni-8 Energy Absorber

Part No: 7241073

For use in Uni-8, Uni-8 Overhead and Uni-16 systems to reduce loads generated in a fall arrest situations. Reduced maximum fall arrest load by up to 4.5kN (minimum system load will not fall below 7.5kN). When calculating the minimum ground clearance for systems using Uni-8 Energy absorbers, be sure to add 300mm per energy absorber used. Max pretension in system 5kN.

Component Specifi cation

Application

Finish Natural Weight 1.19kg (2.6lbs) Quality ISO 9001 Ø12mm (0.47”) 240.8mm (9.48”) Ø13mm (0.51”) Ø63.5mm (2.5”) 4mm (0.16”)

(13)

Min Ground Clearance (m) / Min. vrije valruimte (m) / Distancia minima hasta el suelo (m) / Mindestabstand zum Boden (m) / Hauteur libre minimale (m) / Altura mínima livre (mt) / Distanza libera minima da terra (m) / Min. höjd ovanför marken Installation Date / Installatiedatum / Fecha de instalación / Montagedatum /

Date d'installation / Data da instalação / Data installazione / Installationsdatum

Installed By / Geïnstalleerd door / Instalado Por / Montiert durch / Installateur / Instalado por / Installato da / Installerad av Contact Number / Contactnr. / Tel. de contacto / Kontakttelefon / Téléphone / Nº de Contacto / Numero contatto / Kontaktnummer

Next Service Date / Datum volgende keuring / Próxima fecha de revisión / Termin der nächsten Wartung / Prochaine date d’entretien / Data da próxima Inspecção / Data prossima manutenzione / Nästa servicedatum

System Serial No / Serienummer / Número de serie del sistema / Seriennummer des Systems / Numéro de série / Nº de série do sistema / N. di serie sistema / Systemets serienr.

Max Users Per Span / Max. aantal gebruikers per overspanning / Máximo de usuarios por vano / Höchstzahl der Benutzer pro

Spannweite / Nombre maximal d’utilisateurs par portée / Nº máximo de utilizadores por vão / N. utenti max. per sezione / Max. användare per skena Max Users Per System / Max. aantal gebruikers per systeem / Máximo de usuarios por sistema / Maximale Benutzer pro

System / Nombre maximal d’utilisateurs par système / Nº máximo de utilizadores por linha / N. utenti max. per sistema / Max. användare per system

www.capitalsafety.com EN795:1996 Class C OSHA COMPLIANT AS/NZS 1891.2

Use Energy Absorbing Lanyards / Gebruik energie-absorberende verbindingslijnen / Utilice acolladores de absorción de energía / Verwenden Sie falldämpfende Sicherheits-/Anschlagseile / Utilisez des longes à absorption d’énergie / Usar cordas com amortecedor de energia / Utilizzare funi ad assorbimento d’energia / Använd energiupptagande taljerep

horizontal systems

cable

Not applicable to Rail Systems

Technical Datasheet No: 1096

Cable ID Tag

Part No: 7241135

For use on all cable systems (Languages: English, Spanish, Dutch, German, French, Portuguese, Italian and Swedish).

Must be attached in a visible location near the start of the system. It is completed by the installer with essential information for the user.

Component Specifi cation

Application

Material Aluminium 5005

Finish Anodised. Screen printed & low temperature baked.

Weight 9g (0.32oz)

200mm (7.87”)

(14)

Worldwide Locations

UK

5a Merse Road North Moons Moat Redditch, Worcestershire B98 9HL

UK

t: +44 (0) 1527 548 000 f: +44 (0) 1527 591 000

EUROPE, MIDDLE EAST & AFRICA

Le Broc Center Z.I. 1re Avenue – BP15 06511 Carros Le Broc Cedex FRANCE t: +33 (0)4 97 10 00 10 f: +33 (0)4 93 08 79 70 USA 3833 SALA Way Red Wing MN 55066 USA freephone: 800 328 6146 t: +1 (651) 388 8282 f: +1 (651) 388 5065 CANADA 260 Export Boulevard Mississauga Ontario L5S 1Y9 CANADA freephone: 800 387 7484 t: +1 (905) 795 9333 f: 888 387 7484

AUSTRALIA & NEW ZEALAND

95 Derby Street Silverwater NSW 2128 AUSTRALIA freephone: 1800 245 002 (AUS) freephone: 0800 212 505 (NZ) t: +61 2 8753 7600 f: +61 2 8753 7603 ASIA No 6 Tuas Avenue 18 638892 SINGAPORE t: +(65) 65587758 f: +(65) 65587058

Capital Safety Group, through our Uniline brand is the global market leader in the design and

manufacture of engineered fall protection systems. Through a combination of expert knowledge and

practical experience, we can help our customers reduce risk and increase safety when working at height.

Our comprehensive Uniline range of products offers fully compliant, practical solutions for structures of all

types, in all industries. Our ethos of delivering quality, service, training and support for our customers has

earned Uniline a deserved reputation for excellence around the world.

Operating through specialist safety companies globally, Uniline provides local support and installation

services to meet the specifi c safety objectives of all our customers.

local distributor/systems integrator

If you need a safety solution for roof access during maintenance and inspection tasks, then look no further than Uniline’s Roofi ng product range. Our products, including roof anchors, horizontal lifelines & horizontal rail systems offer comprehensive protection for workers on all types of roofs.

The products in our Horizontal systems range are some of the best know brands in fall protection safety. The versatility of these products combined with Uniline’s expertise in fall protection ensures we can solve even the most complex of height safety problems in industry, construction, façade access and for all manner of building maintenance and inspection tasks.

The best vertical fall protection systems in the world won’t let you down. The extensive development of this range of products for vertical structures including masts, towers, pylons, wind turbines, silos, bridges and chimney stacks ensures customers will enjoy the safest and most functional climbing experience possible.

A unique range of custom access products for challenging fall protection situations in transport and industry. These solutions are structurally analysed and designed to our customers exact needs and specifi cations.