Concepts
Products
Service
Building new
solutions.
Lindner undertakes major worldwide projects in all areas of interior fi nishes, insulation technology, industrial services and building facades. From pre-planning through to project completion Lindner is your partner of choice.
The Company’s extensive manufacturing capability enables quality to be strictly maintained whilst allowing maximum fl exibility to meet individual project requirements.
Environmental considerations are fundamental to all Lindner’s business principles.
Through partnerships with clients Lindner turns concepts into reality.
Choosing Lindner you have:
Lindner Concepts:
Tailored solutions specifi cally geared to satisfy individual project requirements
Lindner Products:
Quality materials and systems to the very highest industry standards
Lindner Service:
Comprehensive project management services
Lindner Plus – Organisation
Our range of organised storage components keeps your offi ce and interiors tidy: from shelving and fi ling systems to whiteboards. Ensuring all your documents are stored perfectly in the right place.
Item no. Article Photo
001
Shelf system without end supports
Flat shelf supports, for hook-on type wood or metal shelving.
Material: Powder-coated metal;
blockboard coated with white melamine resin, plastic-edged.
Available in several dimensions.
Item no. Article Photo
002
Shelf system with book-ends
Book-ends, for hook-on type wood or metal shelving.
Material: Powder-coated metal;
blockboard coated with white melamine resin, plastic-edged.
Available in several dimensions.
Bracket-mounted
shelf system
The shelf system is hooked into the substructure in the system joints. It is ideally suited for organising folders, books and other offi ce supplies.
Item no. Article Photo
101
Brochure rack
Material: Anodised aluminium, matt silver
Item no. Article Photo
102
Folder rack
Material: Anodised aluminium, matt silver
Integrated traverse
organisation
Aluminium rails are integrated into the wood or metal wall panels of Lindner Logic partition walls, enabling organised storage for accessories.
Note:
The aluminium rails panel option must be specifi ed when ordering the wall panels. The system cannot be retrofi tted.
no longer available
103
CD rack
Material: Anodised aluminium, matt silver Available in several dimensions.
Item no. Article Photo
105
Storage rack
Material: Anodised aluminium, matt silver Available in several dimensions.
Item no. Article Photo
104
Picture hook
Material: Anodised aluminium, matt silver
Item no. Article Photo
106
Bookrest
Material: Anodised aluminium, matt silver
Item no. Article Photo
108
Cloakroom hook
Material: Anodised aluminium, matt silver
Item no. Article Photo
107
Wastepaper bin
Material: Anodised aluminium, matt silver
no longer available
no longer available
109
Single coat hook
Material: Anodised aluminium, matt silver
Item no. Article Photo
110
Triple coat hook
Material: Anodised aluminium, matt silver
no longer available
Bracket-mounted
traverse organisation
An elegant, minimalist rail system that uses special adapters to hook into the vertical system joints. The accessory elements are hooked into the rail. Plastic rollers are attached to the underside of the rails: these rollers can hold loose pages or charts. The accessory elements are secured in the rail and all movable boards are fi tted with spacing rollers to avoid scratching the wall.
The bracket-mounted traverse organisation system can also be installed on plasterboard or exposed walls.
Item no. Article Photo
201
Bracket-mounted organisation rail
The bracket-mounted organisation rail is needed for all of the following products except the non-movable boards.
Material: Anodised aluminium, matt silver Please select the colour of the decor strip in the rail (see page 16).
Adapters for Lindner partition systems are included in delivery.
Available in several dimensions.
Item no. Article Photo
202
Magnet adapter
For attaching the organisation rail to any magnetic surface.
This avoids the need to have shelf perforations available in the vertical system joints.
Item no. Article Photo
204
Fabric (pin)board*, usable on one side
This board hooks into the rail, where it can slide freely.
Material: Anodised aluminium frame, matt silver *Please choose fabric colour; see colour codes on page 16.
Available in several dimensions. 203
Whiteboard, usable on one side Magnetic fi xing
This board hooks into the rail, where it can slide freely.
Material: Anodised aluminium frame, matt silver; whiteboard surface composed of scratch-proof enamelled steel sheet; erasable writing surface. Available in several dimensions.
Item no. Article Photo
205
Sliding board, usable on both sides
This board hooks into the rail, where it can slide freely. Range of possible combinations:
Magnetic whiteboard + magnetic whiteboard; magnetic whiteboard + fabric* board; fabric* board + fabric* board.
Material: Anodised aluminium frame, matt silver; whiteboard surface composed of scratch-proof enamelled steel sheet; erasable writing surface. *Please choose fabric colour; see colour codes on page 16.
Item no. Article Photo
206
Projection screen
This board hooks into the rail, where it can slide freely.
Material: Anodised aluminium frame, matt silver Available in several dimensions.
Item no. Article Photo
207
Projection screen with erasable (wet-wipe) writing surface
This board hooks into the rail, where it can slide freely.
Material: Anodised aluminium frame, matt silver; board surface enamelled steel
Available in several dimensions.
Item no. Article Photo
208
Non-sliding whiteboard with magnetic fi xing
The board hooks into the vertical joints of Lindner partition systems and is non-sliding. The bracket-mounted organisation rail is not required. Supplied with an integrated organisation groove with edge protection.
Item no. Article Photo
210
Storage tray for sliding boards
Bolts on to the underside of the board.
Usable for both one- and double-sided sliding boards.
Material: Anodised aluminium, matt silver Available to fi t several board widths. 209
Non-sliding fabric (pin)board*
The board attaches to the perforations in the vertical joints of Lindner partition systems and is non-sliding. The bracket-mounted organisation rail is not required. Supplied with an integrated storage groove with edge protection.
Material: Anodised aluminium frame, matt silver *Please choose fabric colour; see
colour codes on page 16. Available in several dimensions.
Item no. Article Photo
211
Storage rail for one-sided sliding boards
Mounted directly under the edge of the sliding board.
Usable only for one-sided sliding boards. Material: Anodised aluminium, matt silver Available to fi t several board widths.
Item no. Article Photo
212
Flipchart clip rail
Magnetic clip rail, which is attached to a
magnetic board. The paper cannot be folded over the top.
Flipchart paper is not included.
Material: Anodised aluminium, matt silver
Item no. Article Photo
213
Storage rack
Hooks into the rail.
Rack can take loads of up to 2 kg.
Material: Anodised aluminium, matt silver Available in several dimensions.
Item no. Article Photo
214
Cloakroom hook
Hooks into the rail.
Item no. Article Photo
216
Chart clip
Hooks into the rail. 215
Single cloakroom hook
Hooks into the rail.
Material: Anodised aluminium, matt silver
Item no. Article Photo
217
Hook
Item no. Article Photo
218
Starter set
Contents: 1 board eraser
1 pack of 10 replacement eraser strips 1 spray bottle of cleaner
4 whiteboard markers 1 marker holder (magnetic) 20 assorted magnets (30 mm) 20 assorted drawing pins
Colour Code no. White *1 Light grey *2 Anthracite *3 Arctic blue *4 Violet *5 Blue *6 Green *7 Orange *8 Red *9 Linen *L
Colour Code no. White (similar to RAL 9003) DB01
Light grey (similar to RAL 7004) DB02 Quartz grey (similar to RAL 7039) DB03 Dahlia yellow (similar to RAL 1033) DB04 Yellow (similar to RAL 1021) DB05 Blue green (similar to RAL 6004) DB06 Green (similar to RAL 6024) DB07 Orange (similar to RAL 2008) DB08 Red (similar to RAL 3000) DB09 Light red (similar to RAL 2002) DB10 Purple red (similar to RAL 3004) DB11 Gentian blue (similar to RAL 5010) DB12 Blue (similar to RAL 5017) DB13 Steel blue (similar to RAL 5011) DB14 Brown (similar to RAL 8003) DB15 Dark brown (similar to RAL 8014) DB16 Black (similar to RAL 9005) DB17
Other accessories
Item no. Article Photo
301
Bracket hook system for coat hanger
Material: Stainless steel, buffed
Item no. Article Photo
303
Door sign for Lindner partition systems (hook-in system)
This door sign hooks into the shelf perforations in the vertical system joints.
Material: Anodised aluminium, matt silver;
Item no. Article Photo
302
Cloakroom hook
304
Door sign for Lindner partition systems (screw fi xing)
The door sign can be screwed onto a door frame, wall panel or drywall.
Material: Anodised aluminium, matt silver; acrylic glass
Item no. Article Photo
305
Picture hook
The picture hook is slipped over the upper edge of the wall panel and is available for wall panels with a thickness of 13 mm or 19 mm.
The picture hook can take loads of up to 5 kg. Material: Stainless steel, buffed
Information
General conditions
No guarantee of availability is given for the products depicted in this brochure. Details as given in this brochure are up-to-date and provide information about our products and their areas of application. Information is given without warranty, to the best of our knowledge and in consideration of relevant standards. For installation, follow the manufacturer's installation guidelines and the relevant standards. We reserve the right to make technical changes as a result of product developments.
Drawings and photos are for explanatory purposes only.
Technical information
- Lindner partition systems can take loads of up to 40 kg/per linear metre of wall. This fi gure should be considered especially as regards the loads placed on storage modules.
- Consult an expert before placing storage modules near tee joints in walls. - If storage modules are hooked into the shelf perforations of the vertical system
joints, this may reduce the wall's sound protection qualities.
- Consult an expert before attaching storage modules to walls that are subject to fi re safety regulations.
- Variations in colour and fi nish – e.g. on anodised or powder-coated surfaces – occur normally during manufacture and cannot be used as reason for a complaint.
TU_W_ORG/E/1 Lindner Group Bahnhofstrasse 29 94424 Arnstorf Germany Phone +49 (0)8723/20-36 81 Fax +49 (0)8723/20-25 47 partitionsystems@Lindner-Group.com www.Lindner-Group.com Lindner Concepts: - Insulation Engineering - Clean Rooms and Laboratories
- Airports and Airlines - Railways and Tunnels - Studios and Concert Halls - Interior Fit-out and Furnishings - Cruise Liner and Ship Fit-out - Hotels and Resorts
- General Contracting
Lindner Products: - Facades
- Roofi ng Systems - Ceiling Systems
- Lights and Lighting Systems - Partition Systems
- Doors
- Floor Systems - Heating and Cooling Technologies - Dry Lining Systems
Lindner Service: - Green Building
- Deconstruction and Gutting - Clearance of Harmful Substances - Industrial Scaffolding
- Research and Development - Delivery - General Planning - Installation - Maintenance and Industrial Service - Public-Private Partnership (PPP)