• No results found

Autonomous Underwater Vehicle Hull Geometry Optimization Using a Multi-objective Algorithm Approach

N/A
N/A
Protected

Academic year: 2020

Share "Autonomous Underwater Vehicle Hull Geometry Optimization Using a Multi-objective Algorithm Approach"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Schematic view of the AUV geometry
TABLE 2.  Summarized mathematical algorithm definition for tail
Figure 3.  Flowchart of NSGA-II for the problem
TABLE 10. Pressure and friction drag for the various body components in the ‘Myring’ profile

References

Related documents

To overcome the inconsistencies associated with the traditional least squares dummy variables estimator of a model containing a serially lagged dependent variable as well as

A program of the Sedgwick County Extension Master Gardeners and K-State Research and Extension – Sedgwick County.. 7001 W 21 st N, Wichita

damages for any breach by the Hirer of these conditions, the Company or its authorised representatives may, at any time after such termination or expiry of the Hire Period, without

The major Advantages are System developed is reproducible type and resident time is very short, Person to person variability is less, Bioavailability is improved by

'ASANALYZERKITWITHSENSORS/#/( EXPANDABLEUP to 4 sensors, with built in impact printer, rechargeable Li-Ion batteries, with dilution pump for CO. Suitable for gas pipes

This paper will first address physician concerns relative to the crisis, including rising malpractice insurance premiums, decreased access to patient care, and the