• No results found

The investigation of structure and mechanical properties Dissimilar joining of aluminum 5052 sheet to titanium alloy by friction stir welding

N/A
N/A
Protected

Academic year: 2021

Share "The investigation of structure and mechanical properties Dissimilar joining of aluminum 5052 sheet to titanium alloy by friction stir welding"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1 Chemical composition of 5052 aluminum and  TiAl6V4  titanium alloys
Fig. 2 Tool geometrical characteristics
Fig. 3 Surface appearance of welded samples
Fig. 7    Strain-Stress curve of samples
+3

References

Related documents

The Adjusted R Square (0.135) shows the relative participation of education dimension in explaining the difference in the intention of leave reaching (13.5%), Based

This advantage is partially offset by the relatively large weight of a train, but the rolling resistance of trains per seat remains about 3 times lower (see table I).. So, trains

This study explores the company’s sustainability strategy by examining the relationship of social-environmental performance achieved in the PROPER valuation and

There was no statistical difference between the single column fixation schemes (anterior column reconstruction plate with bicortical screws (ACP) and the anterior column

Meanwhile, the influences of these varied parameters (pressure sum, fiber blend ratio, and basis weight) on wet strength and dispersiblity of materials were systematically

The growing material and cultural resources possessed by successive post- war cohorts – in terms of greater education, income, social and material security % and free time in and out

1 denotes relative differences in sediment production from treated and untreated conditions on five pinyon- juniper sites studied near Price, Utah.. Sediment