• No results found

Antibacterial and UV Protective Cotton fabric made by Herbal Synthesized Silver Nanoparticles

N/A
N/A
Protected

Academic year: 2020

Share "Antibacterial and UV Protective Cotton fabric made by Herbal Synthesized Silver Nanoparticles"

Copied!
12
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 2 Particle size distribution of P-AgNPs (a), N-AgNPs (b) and A-AgNPs (c)
Fig. 4 P-AgNPs was deposited onto cotton fabric by PEM  process, (a) pure colloidal silver nanoparticle solution, (b) after 1st cycle, (c) after 2nd cycle, (d) after 4th cycle (e) after 6th cycle, (f) after 8th cycle, (g) after 10th cycle and (h) 12th afte
Fig. 5 FTIR graph of H-AgNPs (a) and untreated and treated cotton fabric sample (b)
Table 2. Intensity at 2θ of treated and untreated fabric sample for XRD curve
+3

References

Related documents

The increase in surface area (increase in basis weight and covering power and reduction in fiber diameter) led to higher antimicrobial effectiveness of the structure as presented

Purpose: We attempted to identify changes in back muscle atrophy occurring in multilevel minimally invasive transforaminal interbody fusion (MITLIF) and the impact of these changes

These challenges originate from the fact that users and system are becoming increasingly integrated and are effectively leading us to large-scale socio-technical distributed

Electronic medical record users consistently scored lower in 3 categories (ie, below 3 and below what would be expected based on the published Manitoba eHealth EMR

We sought to identify factors affecting the num- ber of primary care consultations, the amount of time elapsed before seeing an orthopedic surgeon (B interval in

This study was conducted to investigate the complaints against medical malpractice cases referred to Iran Medical Council in various medical fields to provide solutions to re-

• the production cross section of reaction products present in the GENDF files processed by NJOY [5] from the ENDF evaluations, which describe in files (8-9-10, any MT) the

at graphite-shutter interfacial areas, to expedite neutron thermalization, (3) beam shutter upgrade to reduce strayed neutrons and gamma dose, (4) beam collimator redesign to