USB to serial chip CH340
Full text
Related documents
electron-beam evaporation of Si and Ge under UHV conditions (less than 1x10 -10 Torr), that deposition of epitaxial strained SiGe on top of a FIB patterned Si substrate can lead to
It means the virtue COM port is in ttyUSB0, so if you want to use this port, you need to use "ln" command to hard link with device, for example: we are use PL-2303X/H
Application software on the PC could use Bit Bang Mode to download configuration data to the FPGA which would define it’s hardware function, then after the FPGA device is
Integrated EEPROM - Previous generations of FTDI’s USB UART devices required an external EEPROM if the device were to use USB Vendor ID (VID), Product ID (PID), serial number
The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTDI’s FT232RQ USB to Serial UART interface IC device which handles all the USB signalling
Connecting Peripherals to the Computer High-Speed and Data Transfer Ports. • Universal serial bus (USB) is the most common port type used to connect input and output devices to
After some investigation with an oscilloscope we discovered that the ch340 usb-serial interface chip on this nano v3.0 device a common chip for cheap arduino clones is forced to reset
Program je osmišljen od strane vodećih stručnjaka za kockanje mladih i školskih interencija u Hrvatskoj (Ricijaš, N., Kranželić, V., Dodig Hundrić,