• No results found

Optimal Tuning of PID Controller for DC Motor using Bio Inspired Algorithms

N/A
N/A
Protected

Academic year: 2020

Share "Optimal Tuning of PID Controller for DC Motor using Bio Inspired Algorithms"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Schematic representation of unity feedback PID controller system architecture
Figure 2.  The calculation of the transfer function of the motor has been done using the various parameters listed below as:
Table 2. Parameters of the PID Controller optimized by  Genetic Algorithm.
Table 5. Comparison of the Results.
+2

References

Related documents

RAFT polymerizations utilize either dithioesters or thiocarbonylthio functionality and have the ability to combine with propagating radical species using a chain-transfer

The output diode reverse recovery is alleviated by the leakage inductance of the coupled inductor.Without increasing the duty cycle of the switch by connecting

In the AFCEN codes, an alternative solution is proposed: It is advised to use the pipe’s influence functions (up to a limited maximum defect size a/h = 0.25) and analytical

mois. En troisieme lieu, les prostatites avec persistance du meme germe, donc bacteriologiquement chroniques, sont moins frequentes que les prostatites recidivantes. Enfin

Following these principles, we carried out a randomized prospective study and we compared functional and radiological outcomes and complication rate in patients treated with two

Wu et al Virology Journal 2014, 11 192 http //www virologyj com/content/11/1/192 RESEARCH Open Access Protease 2A induces stress granule formation during coxsackievirus B3 and enterovirus

This paper focuses on design and analysis of cascade P/PI position controller and an inverse-model- based disturbance observer (IMBDO) for disturbance forces

albicans in AIDS patients with oropharyngeal candidiasis being treated with fluconazole by sampling multiple colonies from culture isolates at the initial and at all relapse