• No results found

Experimental Investigation of Laser Welding Process in Butt Joint Configurations

N/A
N/A
Protected

Academic year: 2020

Share "Experimental Investigation of Laser Welding Process in Butt Joint Configurations"

Copied!
14
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Chemical composition of the metal.
Figure 1. Experimental set-up showing (a) laser and (b) clamping system.
Table 2. Factors and levels for experimentations.
Table 3. Results of repeatability test (a) no gap and (b) with gap.
+7

References

Related documents

• Follow up with your employer each reporting period to ensure your hours are reported on a regular basis?. • Discuss your progress with

effect of government spending on infrastructure, human resources, and routine expenditures and trade openness on economic growth where the types of government spending are

The PROMs questionnaire used in the national programme, contains several elements; the EQ-5D measure, which forms the basis for all individual procedure

Go to the Technical Writing on an expanded form of this manuale di microsoft project short mtcube, along with a correctly formatted type of the example user manual page above..

Results suggest that the probability of under-educated employment is higher among low skilled recent migrants and that the over-education risk is higher among high skilled

For the poorest farmers in eastern India, then, the benefits of groundwater irrigation have come through three routes: in large part, through purchased pump irrigation and, in a

National Conference on Technical Vocational Education, Training and Skills Development: A Roadmap for Empowerment (Dec. 2008): Ministry of Human Resource Development, Department

4.1 The Select Committee is asked to consider the proposed development of the Customer Service Function, the recommended service delivery option and the investment required8. It