Professional USB to Serial Adapter Hub with COM Retention

If you are installing AIM software for the first time, USB driver installation starts and the window on the right appears.. Please disconnect any USB cable from your PC and click

Select install from a list or specific location[Advanced], click Next, and select search for a suitable driver for my device [recommend] click next, select specify a location click

2 Right click on “PEMicro/Freescale – CDC Serial Port” device and select “Update Driver Software” *. Plug in USB cable to the OpenSDA USB connector

Once you have installed the driver software and connected the adapter to your computer, the device drivers for the ports begin installing automatically.. This installation

After you have finished the software installation procedures for your operating system and have connected the ATEN USB-to-Serial Hub to your computer, connect the peripheral

Otherwise, please select “Yes, I want to restart my computer now.” and click “Finish” to complete the driver installation.. After reboot the computer, the USB extended

Click the Update Driver button so that the Upgrade Device Driver Wizard will appear 9.. Select Search for a suitable driver for my device (recommended) and click Next

Click [Browse...] and select the folder in which the unzipped driver files are saved.. Click Install this driver