• No results found

Conversion Box. User Manual. L-com CONNECTIVITY

N/A
N/A
Protected

Academic year: 2021

Share "Conversion Box. User Manual. L-com CONNECTIVITY"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

(1)

6265 Variel Avenue Woodland Hills, CA 91367 voice: 818 884-6294 fax: 818 884-3108 email: [email protected] website: http://www.gefen.com

Distributed by:

L-com

® CONNECTIVITY PRODUCTS 45 Beechwood Drive North Andover, MA 01845 www.L-com.com E-mail: [email protected] Fax: 978-689-9484 Toll Free: 800-343-1455

User Manual

DVI

to

VGA

Conversion Box

ex

tend

it

(2)

Congratulations

on your purchase of the ex•tend•it DVI to VGA Conversion Box. Your complete satisfaction is very important to us. Gefen’s line of KVM (Keyboard Video & Mouse), DVI, ADC, USB, switches, extenders, converters and hubs is designed to make computer use more comfortable, more productive and less expensive.

KVM switches allow access to multiple computers from a single keyboard, while the extenders give the user control over a computer up to 330 feet away from the work area.

The ex•tend•it line offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, and school and corporate training environments.

Our Committment

Gefen will always offer the finest quality product at the best possible price. Included in that price is a lifetime of free support from a team of out-standing engineers.

Introduction

The ex•tend•it DVI to VGA Conversion Box connects analog CRT or LCD monitors to DVI compliant video graphic cards. Analog monitors

can also be used instead of digital monitors in applications requiring two monitor displays side by side.

• Connects computers with DVI-D connectors to analog SVGA monitors or projectors

• Maintains up to 1920 x 1200 x 60 resolution

• Supports DDWG standard for DVI compliant monitors • Installs in seconds

(3)

How to connect the

DVI to VGA Conversion Box

1-

Connect your analog monitor to the HD-15 female connector at the output side of the DVI to VGA Conversion Box.

2-

Connect the DVI (m-m) cable between the DVI connector on the graphic card and the DVI input of the DVI to VGA Conversion Box.

3-

Connect the power supply.

The convertor generates all the compatible digital to analog conversion signals to make the connection between the digital input and the analog output work.

What’s included

• 6 foot DVI-D cable (m-m) • 5V external power supply • DVI to VGA Conversion Box

. Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.

(4)

.

front view

(5)

Wiring Diagram Technical Support: phone:818-884-6294 fax: 818-884-3108 email: [email protected] web: www.gefen.com Technical Support Hours: 9:00 am – 5:00 pm PST Monday -– Friday

Write to: Gefen, Inc.

c/o Customer Service 6265 Variel Avenue Woodland Hills CA 91367-9897 USA

Asking for Assistance

Trademarks:

Macintosh is a trademark of Apple Computer Inc. ex•tend•it is a trademark of Gefen Inc.

The DVI to VGA Conversion Box is a trademark of Gefen Inc. © Copyright 2002 Gefen Inc. All Rights Reserved

(6)

,

-Warranty

Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc. is notified within one (1) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of the repair. Such repairs are warranted for ninety (90) days from the day of re-shipment to the Buyer.

This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty or merchantability or fitness for any particular purpose, all of which are expressly disclaimed. The information in this manual has been carefully checked and is believed to be accurate. However, Gefen Inc. assumes no responsibility for any inaccuracies that may be contained in this manual. In no event will Gefen Inc. be liable for direct, indirect, special incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. The technical information

contained herein regarding DVI to VGA Conversion Box features and specifications is subject to change without notice.

All Rights Reserved © Copyright 2002 Gefen Inc.

ex•tend•it products repeaters Repeaters ADC Repeater DVI Repeater Firewire Repeater extenders ADC•100 DVI•100 USB•100 USB•200 USB•400 USB•500 CAT5•1000 CAT5•2000 CAT5•3000 CAT5•4000 Matrix CAT5•5000 CAT5•6000 CAT5•7000 CAT5•8000 hubs Firewire Hub DVI Hub USB Hub ADC Splitter VGA Splitter VDX•600 switchers DVI Switch ADC Switcher CAT5•4000 Matrix 2x1 DVI Switcher 4x1 DVI Switcher 2x2 DVI Switcher 4x1 VGA Switcher USB Switcher mini PC/Mac PC/Mac 2000 convertors

DVI to ADC Adapter VGA to ADC Adapter DVI to VGA Adapter VGA to DVI Adapter

Adapters

ADC to DVI Adapter ADC to VGA Adapter DVI to VGA Adapter DVImate

DVI Detective

Cables

Fiber Optic Cables USB Cables CAT-5 Cables DVI Cables Firewire Cables PS/2 Cables VGA Cables

(7)

6265 Variel Avenue Woodland Hills, CA 91367

voice: 818 884-6294 fax: 818 884-3108 email: [email protected] website: http://www.gefen.com

Distributed by:

L-com

® CONNECTIVITY PRODUCTS 45 Beechwood Drive North Andover, MA 01845 www.L-com.com E-mail: [email protected] Fax: 978-689-9484 Toll Free: 800-343-1455

References

Related documents

Š Press and hold a port selection pushbutton for more than 2 seconds to bring the KVM focus plus the USB and Audio focus to the computer attached to its corresponding port1. See

The Front Panel buttons allow direct control over KVM switch operation and channel switching. Simply press the PC button for PC port switching. If binding is enabled between PC /

O Online Registration iii OSD Functions 29 Hotkey 27 , 31 Logout 39 Main Screen 27 , 28 Main Screen Headings 28 Navigation 29 Overview 27 Password 27 P Password 27 Pause 38 Port

Š Press and release a port selection switch to bring the KVM focus to the computer attached to its corresponding port.. The USB and Audio focus does not change – they stay with

The CS682 provides three convenient methods of selecting computers: Manual – click the pushbutton on the Remote Port Selector; Mouse – click the mouse’s scroll wheel; and Hotkey –

Press and hold a port selection switch for more than 2 seconds to bring the KVM, USB, and Audio focus to the computer attached to its corresponding port.. Press and hold port

To select the audio signal from any port of 4 connected computers, press the FUNC button in combination with the other pushbuttons.. Press and hold the

3. a) If you are using surface cabling, ensure you have enough Category 5 unshielded twisted pair (UTP) network cabling to connect the Local unit to the Remote unit’s location,