Thermo Mechanical Effect on Poly Crystalline Boron Nitride Tool Life During Friction Stir Welding (Dwell Period)
Full text
Figure
Related documents
Strain rate and material flow: Figure 11 shows the strain rate distribution in the tool/ workpiece contact region for two different welding speeds (slow: W1 and high: W2) at
In this thesis, the effects of FSW parameters ( i.e. tool traverse speed and tool rotational speed) have been examined on two different cast alloys with particular focus
Process parameters such as tool rotational speed, tool traverse speed and axial force and tool dimensions play an important role in obtaining a specific
In FSW, the main influencing parameters are rotational speed, welding traversing speed and pressure.The observation from this experimental investigation is that
In this study, considering the effect of rotational and forward speed of welding tool on the mechanical properties of welded region, a hybrid optimization method based on
The minimum and maximum values of the welding parameters, the tool rotational speed and welding speed, were varied for different experiments as shown in table 5 below and
Hence in this paper an attempt was made to study the influence of different tool profiles by keeping the constant process parameters as tool rotational speed,
Dinaharan, “Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum