• No results found

Influence of Sintering Temperature on Densification, Structure and Microstructure of Li and Sb Co Modified (K,Na)NbO3 Based Ceramics

N/A
N/A
Protected

Academic year: 2020

Share "Influence of Sintering Temperature on Densification, Structure and Microstructure of Li and Sb Co Modified (K,Na)NbO3 Based Ceramics"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1 shows the room temperature XRD patterns of < 0.06. It can be seen that a perovskite structure with a small amount of secondary phase Kthe (1 − x)K0.5Na0.5NbO3–xLiSbO3 ceramics with 0.04 < x 3Li2Nb5O15 with the
Figure 3. SEM micrographs of fractured surface of (1 −1 x)K0.5Na0.5NbO3–xLiSbO3 pellets (x = 0.045) sintered at (a) 1060˚C; (b)   080˚C, (c) 1100˚C and (d) 1120˚C
Figure 4. Density of (1 −as a function of  x)K0.5Na0.5NbO3–xLiSbO3 ceramics x.

References

Related documents

Abstract: In this paper, we propose a new approach to constructing similarity measures using the entropy measure for Interval-Valued Intuitionistic Fuzzy Sets.. In addition, we

In addition, we study five recent sovereign defaults and find that the 2001 Argentine default is the most likely to have been triggered by political turnover, and that the behavior

The purpose of this work was to quantitatively evaluate the difference between the rehabilitation effects of an EMG-driven robot hand-assisted upper limb training program conducted

Does the use of the graphing calculator improve high school calculus students‟ reasoning ability in calculus problems applying the definite integral?... In what specific areas

It can be concluded that the presented robot has the design criteria such as suitable degrees of freedom, low inertia and high safety and so is suitable for gait

The main objectives of this thesis are (1) to propose a novel Signal-to- Noise Ratio (SNR) discrimination metric accommodating heterogeneous variance-covariance