• No results found

The mechanical properties of red deer antler bone when used in fighting

N/A
N/A
Protected

Academic year: 2020

Share "The mechanical properties of red deer antler bone when used in fighting"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Summary of how the various antlers were produced and used for assessment
Table 2. Design for the experiment testing antler and femur bone specimens under two humidity conditions (wet or room-dry)
Fig. 1. Sampling positions in deer antler and femur for bars used formechanical testing
Fig. 2. (A)weight change in two sets of antlers from the LM game estategroup, differing in the date of cutting, compared with theweight the week before
+4

References

Related documents

Done well, economic policy analysis can inform decision makers about alternative institutional arrange- ments; it can expand the range of choices in the debate; it can provide

We present a case of hemolysis in a glucose-6-phosphate dehydrogenase- (G6PD-) deficient patient receiving high-dose vitamin C infusions for his rheumatoid

EXHAUST DUCTING AFTER ENGINE (TO END OF EXH. AFTERTREATMENT) FG/FGS: 146 GROUP NUMBER (FG) GROUP NAME BOM-No.. STARTING SYSTEM FG/FGS: 170 GROUP

Objective: The aim of this study was to evaluate the in vitro developmental competence of mouse vitrified pre-antral follicles in comparison to isolated

Mission: At Iowa Public Television, we are dedicated to providing quality innovative media and services that educate, inform, enrich and inspire Iowans.. Vision: Iowa is at

Several characteristics are analyzed and used to compare the two types of diurnal streamflow cycles: (1) the sign of the perturba- tion (increase or decrease during the day), (2)

The Warmafloor Floating Floor system is for use when underfloor heating is to be installed on concrete floors where a dry finish to the floor is required, not a screed topping..

We have audited the accompanying consolidated financial statements of Wilton Reinsurance Bermuda Limited and its subsidiary (the “Company”), which comprise the consolidated