Star Access Codes. Feature Access Code Instruction Call Forwarding No Answer Activation

(1)

www.optimumconnect.co.uk www.datasharp.co.uk

Feature Access Code Instruction

Automatic Callback Deactivation ex. #8 1. Lift Telephone handset. Press the assigned access code (ex.#8).

2. Replace telephone handset

3. The Automatic Callback Deactivation is now off

Call Forwarding Always Activation ex. *72 1. Lift Telephone handset. Press the assigned access code (ex.*72).

2. Enter the Telephone number to which all calls will be forwarded.

3. The System then plays a confirmation announcement and the user hangs up.

4. The Call Forwarding Always service is now on.

Call Forwarding Always Deactivation ex. *73 1. Lift Telephone handset. Press the assigned access code (ex.*73)

3. The Call Forwarding Always is now off.

Call Forwarding Busy Activation ex. *90 1. Lift Telephone handset. Press the assigned access code (ex.*90).

2. Enter the phone number to forward calls when you are on the phone.

4. The Call Forwarding Busy service is now on.

Call Forwarding Busy Deactivation ex. *91 1. Lift Telephone handset. Press the assigned access code (ex.*91).

3. The Call Forwarding Busy service is now off.

Call Forwarding No Answer Activation

ex. *92 1. Lift Telephone handset. Press the assigned access code (ex.*92).

2. Enter phone number to forward calls when you do not answer the phone.

4. The Call Forwarding No Answer Activation is now on.

(2)

Call Forwarding No Answer Deactivation

3. The Call Forwarding No Answer Activation is now off.

Call Forwarding Always to Voicemail Activation

ex. *21# 1. Lift Telephone handset. Press the assigned access code (ex.*21#).

3. The Call Forwarding Always to Voicemail service is now on.

Call Forwarding Always to Voicemail Deactivation

ex. #21# 1. Lift Telephone handset. Press the assigned access code (ex.#21#).

3. The Call Forwarding Always to Voicemail service is now off.

Call Forwarding Busy to Voicemail Activation

ex. *40# 1. Lift Telephone handset. Press the assigned access code (ex.*40#).

3. The Call Forwarding Busy to Voicemail service is now on.

Call Forwarding Busy to Voicemail Deactivation

ex. #40# 1. Lift Telephone handset. Press the assigned access code (ex.#40#)

3. The Call Forwarding Busy to Voicemail service is now off.

Call Forwarding No Answer to Voicemail Activation

ex. *41# 1. Lift Telephone handset. Press the assigned access code (ex.*41#)

3. The Call Forwarding No Answer to Voicemail service is now on.

(3)

Call Forwarding No Answer to Voicemail Deactivation

ex. #41# 1. Lift Telephone handset. Press the assigned access code (ex.#41#)

3. The Call Forwarding No Answer to Voicemail service is now off.

Calling Line ID Delivery Blocking Per Call

2. This results in a confirmation tone followed by a dial tone.

3. The User can then make the call as per usual and their identities are blocked.

4. Dial the intended phone number.

5. The Call is placed, and your caller line ID is not displayed

Calling Line ID Delivery per-call ex. *65 1. Lift Telephone handset. Press the assigned access code (ex.*65).

2. This results in a confirmation tone followed by a dial tone.

3. The User can then make the call as per usual and their identities delivered.

5. The Call is placed, and your Calling Line ID is displayed for this call.

Call Park ex. *68 1. Place the caller on hold.

2. Press the assigned code (ex.*68).

3. Enter extension of phone on which call is to be parked and press # 4. Replace telephone handset. The Call is parked at the entered extension.

Call Park Retrieve ex. *88 1. Lift Telephone handset. Press the assigned code (ex.*88).

2. You are now connected to your parked call.

Call Pickup ex. *98 1. Lift Telephone handset. Press the assigned code (ex.*98).

2. The longest-ringing phone in your Call Pickup group is connected.

(4)

Call Return ex. *69 1. Lift Telephone handset. Press the assigned code (ex.*69).

2. The last incoming phone number is redialled.

Cancel Call Waiting ex. *70 1. Lift the Telephone handset. Press the assigned access code (*70)

2. The System plays down a confirmation announcement and then applies a dial tone.

3. The User then dials the destination number.

4. The Call Waiting service is now turned off so that you can make an uninterrupted call.

5. The Call Waiting service will be back on after the next outgoing phone call.

Clear Voice Message Waiting Indicator

ex. *99 1. Lift the Telephone handset. Press the assigned access code (*99)

2. The audible or visual (on some devices) message waiting indicator on your phone has been cleared.

Direct Voice Mail Transfer ex. *55 1. Place your active call on hold. Press the assigned code (ex. *55).

2. The caller is then redirected to your voicemail.

Directed Call Pickup with Barge-In ex. *33 1. Lift the Telephone handset. Press the assigned access code (ex. *33).

2. Enter the extension where the call is either ringing or active.

3. The User answers or joins the call for the specified extension.

Do Not Disturb Activation ex. *78 1. Lift the Telephone handset. Press the assigned access code (ex. *78).

3. The Do Not Disturb service has been turned on.

4. The phone will not ring while this service is on.

(5)

Do Not Disturb Deactivation ex. *79 1. Lift the Telephone handset. Press the assigned access code (ex. *79).

3. The Do Not Disturb service has been turned off.

Last Number Redial ex. *66 1. Lift the Telephone handset. Press the assigned access code (ex. *66).

2. The last outgoing phone number is redialled.

Per Call Account Code ex. *71 1. Lift the Telephone handset. Press the assigned access code (ex. *71).

2. Dial the account code.

4. The call is placed using the specified account code.

Push to Talk ex. *50 1. Lift handset.

2. Dial *50.

3. You will be prompted for an extension number.

4. Dial the extension of the party/group you wish to tannoy.

5. Say message.

6. Hang up when finished.

(6)

Speed Dial 100 ex. *75 1. Lift the Telephone handset. Press the assigned access code (ex. *75), followed by the prefix and two-digit code representing the phone number you would like to call.

2. The Speed number is dialled.

Programming a Speed Dial Code 100 1. To program a Speed Dial Code through the phone, the User dials the Speed Dial 100 feature access code, (default is *75). The User then hears the “recall dial tone” (three quick beeps and then a dial-tone).

2. The User then dials the two-digit speed code to be created or modified, followed by the digits to be associated with it.

3. The User then ends the programming with # or waits for the inter-digit timer to expire.

4. The service then announces the success or failure of the programming.

Speed Dial 8 ex. *74 1. Lift the Telephone handset. Press the assigned access code (ex. *74), and the 2-9 digit number representing the phone number you would like to call.

2. The Speed number is dialled.

Programming a Speed Dial Code 8 1. To program a Speed Dial Code through the phone, the User dials the Speed Dial 100 feature access code, (default is *74). The User then hears the “recall dial tone” (three quick beeps and then a dial-tone).

2. The User then dials the two-digit speed code to be created or modified, followed by the digits to be associated with it.

3. The User then ends the programming with # or waits for the inter-digit timer to expire.

4. The service then announces the success or failure of the programming.