• No results found

A32 0006 1 Tape Specifications for IBM One Half Inch Tape Drives at 556 800 BPI and 3200 FCI Jul69 pdf

N/A
N/A
Protected

Academic year: 2020

Share "A32 0006 1 Tape Specifications for IBM One Half Inch Tape Drives at 556 800 BPI and 3200 FCI Jul69 pdf"

Copied!
16
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2. The write enable ring should conform to the dimensions specified in Figure 3
TABLE I Tolerance
Figure 1. Tape/Reel ASM Revised 17NOV67
Figure . 2 Sectional
+2

References

Related documents

Data path failover and load balancing exclusively support native Fibre Channel Ultrium 2 and Ultrium 3 Tape Drives in a IBM 3582 library using the IBM tape device driver for

NOTE: The HP Smart Array P411 Controller is for connection to external (desktop) tape drives, tape drives in Rack-Mount Kits, tape autoloaders and tape libraries. SAS Tape Drives

Test and site, cognos report design template for building a specific for development of user defined conformed dimension and analysis studio.. Contained all resources at cognos

Provide a dedicated wet exhaust system to capture moist air over the pot/pan and dishwasher. Either provide canopy-type hoods or use the integral hoods furnished by the

Aurora Health Care Bethesda Health Group Bristol Hospice, LLC Centerlight Healthcare CHS Home Care Division Community Home Health Services Covenant Care at Home Family Home

Organizations today are realizing they need to focus more attention on users, authentication, and especially the privileged user access to resources within their

ARUNKUMAR.G M.Tech, Lecturer in E&CE Dept..

The high performance and capacity of the IBM LTO Ultrium 4 Tape Drives, T1600P can help reduce the number of tape cartridges, tape drives and tape libraries required in a