• No results found

Optimal Design of Pi Controller for Doubly Fed Induction Generator

N/A
N/A
Protected

Academic year: 2020

Share "Optimal Design of Pi Controller for Doubly Fed Induction Generator"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1 shows the Simulink diagram of DFIGPI. In this model rotor is excited by slip frequency of voltage derived from PI controller

References

Related documents

The stator side converter is used to control the output voltage in direct voltage control manner and the rotor side converter is current controlled where the power imbalance of

Index Terms : Grid side converter(GSC), rotor side converter (RSC), static synchronous compensator (STATCOM)doubly fed induction generator (DFIG), integrated active

The performance measures for IMC-PI controller, IMC-PI tuned using Genetic Algo- rithm (GA) and IMC-PI tuned using Particle Swarm Optimization (PSO) for linearized and decoupled

This paper proposes a voltage control of DC connect voltage for Effective rotor side converter. Consistent DC interface voltage and solidarity control factor of

Bindeshwar Singh, V.Mukherjee , PrabhakarTiwari [2] published a paper on impact assessment of Distributed Generation and FACTS controllers in power systems which reviews the work

The set point for the reactive power can be calculated from the active power set point and a desired power factor [1].The necessary control actions were adopted for the rotor

Experimental testing of the doubly-fed induction machine control algorithm with matrix converter at rotor side has been performed.. Speed control algorithm of the doubly-fed

Robust Control for Different Values of Rotor Resistance In order to verify the robustness of VGPI regulator under motor parameters variations, we have simulated the