SCREW CONVEYOR
SCREW CONVEYOR
CATALOG
CATALOG
&
&
ENGINEERING
ENGINEERING
MANUAL
MANUAL
Phone:
Phone: (
(
308 308)
)
324 324--
75917591Fax: (
Fax: (
308 308)
)
324 324--
75497549[email protected]
[email protected]
TOLL FREE:
TOLL FREE:
www.conveyusa.com
www.conveyusa.com
1-8
It is the responsibility of the contractor, It is the responsibility of the contractor, installer, owner and user to install, installer, owner and user to install, maintain and operate the conveyor, maintain and operate the conveyor, components and, conveyor assemblies in components and, conveyor assemblies in such a manner as to comply with the such a manner as to comply with the Williams-Steiger Occupational Safety and Williams-Steiger Occupational Safety and Health Act and with all state and local la Health Act and with all state and local la wsws and ordinances and the American National and ordinances and the American National Standards Institute (ANSI) B20.1 Safety Standards Institute (ANSI) B20.1 Safety Code.
Code.
In order to avoid an unsafe or hazardous In order to avoid an unsafe or hazardous condition, the assemblies or parts must condition, the assemblies or parts must be installed and operated in accordance be installed and operated in accordance with the following minimum provisions. with the following minimum provisions.
1. Conveyors shall not be operated 1. Conveyors shall not be operated unless all covers and/or guards for the unless all covers and/or guards for the conveyor and drive unit are in place. If conveyor and drive unit are in place. If the conveyor is to be opened for the conveyor is to be opened for inspection cleaning, maintenance or inspection cleaning, maintenance or observation, the electric power to the observation, the electric power to the motor driving the conveyor must be motor driving the conveyor must be LOCKED OUT in such a manner that LOCKED OUT in such a manner that the conveyor cannot be restarted by the conveyor cannot be restarted by anyone; however remote from the area, anyone; however remote from the area, until conveyor cover or guards and until conveyor cover or guards and drive guards have been properly drive guards have been properly replaced.
replaced.
2. If the conveyor must have an open 2. If the conveyor must have an open housing as a condition of its use and housing as a condition of its use and application, the entire conveyor is then application, the entire conveyor is then to be guarded by a railing or fence in to be guarded by a railing or fence in accordance with ANSI standard accordance with ANSI standard B20.1.(Request current edition and B20.1.(Request current edition and addenda)
addenda)
3. Feed openings for shovel, front 3. Feed openings for shovel, front loaders or other manual or mechanical loaders or other manual or mechanical equipment shall be constructed in such equipment shall be constructed in such a way that the conveyor opening is a way that the conveyor opening is covered by a grating. If the nature of covered by a grating. If the nature of the material is such that a grating the material is such that a grating cannot be used, then the exposed cannot be used, then the exposed section of the conveyor is to be gua section of the conveyor is to be gua rdedrded by a railing or fence and there shall be by a railing or fence and there shall be a warning sign posted.
a warning sign posted.
4. Do not attempt any maintenance or 4. Do not attempt any maintenance or repairs of the conveyor until power has repairs of the conveyor until power has been LOCKED OUT.
been LOCKED OUT.
5. Always operate conveyor in 5. Always operate conveyor in accordance with these instructions and accordance with these instructions and those contained on the caution labels those contained on the caution labels affixed to the equipment.
affixed to the equipment.
6. Do not place hands, feet, or any part 6. Do not place hands, feet, or any part of your body, in the conveyor.
of your body, in the conveyor.
7. Never walk on conveyor covers, 7. Never walk on conveyor covers, grating or guards.
grating or guards.
8. Do not use conveyor for any purpose 8. Do not use conveyor for any purpose other than that for which it was other than that for which it was intended.
intended.
9. Do not poke or prod material into the 9. Do not poke or prod material into the conveyor with a bar or stick inserted conveyor with a bar or stick inserted through the openings.
through the openings.
10. Keep area around conveyor drive 10. Keep area around conveyor drive and control station free of debris and and control station free of debris and obstacles.
obstacles.
11. Eliminate all sources of stored 11. Eliminate all sources of stored energy (materials or devices that could energy (materials or devices that could cause conveyor components to move cause conveyor components to move without power applied) before opening without power applied) before opening the conveyor
the conveyor
12. Do not attempt to clear a jammed 12. Do not attempt to clear a jammed conveyor until power has been conveyor until power has been LOCKED OUT.
LOCKED OUT.
13. Do not attempt field modification of 13. Do not attempt field modification of conveyor or components.
conveyor or components.
14. Conveyors are not normally 14. Conveyors are not normally manufactured or designed to handle manufactured or designed to handle materials that are hazardous to materials that are hazardous to personnel. These materials which are personnel. These materials which are hazardous include those that are hazardous include those that are explosive, flammable, toxic or explosive, flammable, toxic or otherwise dangerous to personnel. otherwise dangerous to personnel. Conveyors may be designed to handle Conveyors may be designed to handle these materials. Conveyors are not these materials. Conveyors are not manufactured or designed to comply manufactured or designed to comply with local, state or federal codes for with local, state or federal codes for unfired pressure vessels. If hazardous unfired pressure vessels. If hazardous materials are to be conveyed or if the materials are to be conveyed or if the conveyor is to be subjected to internal conveyor is to be subjected to internal or external pressure, manufacturer or external pressure, manufacturer should be consulted prior to any should be consulted prior to any modifications.
modifications.
CEMA insists that disconnecting and CEMA insists that disconnecting and locking out the power to the motor driving locking out the power to the motor driving the unit provides the only real protection the unit provides the only real protection against injury. Secondary safety devices against injury. Secondary safety devices are available; however, the decision as to are available; however, the decision as to their need and the type required must be their need and the type required must be made by the owner-assembler as we have made by the owner-assembler as we have
no information regarding plant wiring, no information regarding plant wiring, plant environment,
plant environment, the interlocking the interlocking of of thethe screw conveyor with other equipment, screw conveyor with other equipment, extent of plant automation, etc. Other extent of plant automation, etc. Other devices should not be used as a substitute devices should not be used as a substitute for locking out the power prior to removing for locking out the power prior to removing guards or covers. We caution that use of guards or covers. We caution that use of the secondary devices may cause the secondary devices may cause employees to develop a false sense of employees to develop a false sense of security and fail to lock out power before security and fail to lock out power before removing covers or guards. This could removing covers or guards. This could result in a serious injury should the result in a serious injury should the secondary device fail or malfunction. secondary device fail or malfunction. There are many kinds of electrical devices There are many kinds of electrical devices for interlocking of conveyors and conveyor for interlocking of conveyors and conveyor systems such that if one conveyor in a systems such that if one conveyor in a system or process is stopped other system or process is stopped other equipment feeding it, or following it can equipment feeding it, or following it can also be automatically stopped.
also be automatically stopped.
Electrical controls, machinery guards, Electrical controls, machinery guards, railings, walkways, arrangement of railings, walkways, arrangement of installation, training of personnel, etc., are installation, training of personnel, etc., are necessary ingredients for a safe working necessary ingredients for a safe working place. It is the responsibility of the place. It is the responsibility of the contractor, installer, owner and user to contractor, installer, owner and user to supplement the materials and services supplement the materials and services furnished with these necessary items to furnished with these necessary items to make the conveyor installation comply make the conveyor installation comply with the law and accepted standards. with the law and accepted standards. Conveyor inlet and discharge openings Conveyor inlet and discharge openings are designed to connect to other are designed to connect to other equipment or machinery so that the flow equipment or machinery so that the flow of material into and out of the conveyor is of material into and out of the conveyor is completely enclosed.
completely enclosed.
One or more warning labels should be One or more warning labels should be visible on conveyor housings, conveyor visible on conveyor housings, conveyor covers and elevator housings. If the labels covers and elevator housings. If the labels attached to the equipment become attached to the equipment become illegible, please order replacement illegible, please order replacement warning labels from the OEM or CEMA. warning labels from the OEM or CEMA. The Conveyor Equipment Manufacturers The Conveyor Equipment Manufacturers Association (CEMA) has produced an Association (CEMA) has produced an audio-visual presentation entitled “Safe audio-visual presentation entitled “Safe Operation of Screw Conveyors, Drag Operation of Screw Conveyors, Drag Conveyors, and Bucket Elevators.” CEMA Conveyors, and Bucket Elevators.” CEMA encourages acquisition and use of this encourages acquisition and use of this source of safety information to source of safety information to supplement your safety program.
supplement your safety program. SEE OTHER SIDE FOR SEE OTHER SIDE FOR
SAFETY LABELS SAFETY LABELS
WARNING AND SAFETY REMINDERS FOR
WARNING AND SAFETY REMINDERS FOR
SCREW , DRAG , AND BUCKET ELEVATOR CONVEYORS
SCREW , DRAG , AND BUCKET ELEVATOR CONVEYORS
NOTICE:
NOTICE: This document is This document is provided by Cprovided by CEMA as a servEMA as a service to the industry in the iice to the industry in the interest of promoting santerest of promoting safety. fety. It is advisory only aIt is advisory only and it is not a substitutend it is not a substitute for a thorough s
for a thorough safety program. afety program. Users should Users should consult with qualified consult with qualified engineers and oengineers and other safety professther safety professionals. ionals. CEMA makeCEMA makes no representas no representations ortions or warranties, either expressed or implied, and the users of this document assume full responsibility for the safe design and operation of equipment. warranties, either expressed or implied, and the users of this document assume full responsibility for the safe design and operation of equipment.
APPROVED FOR DISTRIBUTION BY THE SCREW CONVEYOR SECTION OF THE APPROVED FOR DISTRIBUTION BY THE SCREW CONVEYOR SECTION OF THE
CONVEYOR EQUIPMENT MANUFACTURERS ASSOCIATION (CEMA) CONVEYOR EQUIPMENT MANUFACTURERS ASSOCIATION (CEMA)
CEMA Document: SC 2004-01 CEMA Document: SC 2004-01
CEMA Safety Labels
CEMA Safety Labels
The CEMA safety labels shown below should be used on screw conveyors, drag conveyors, and bucket elevators. The CEMA safety labels shown below should be used on screw conveyors, drag conveyors, and bucket elevators. Safety labels should be placed on inlets, discharges, troughs, covers, inspection doors & drive guards. See CEMA Safety labels should be placed on inlets, discharges, troughs, covers, inspection doors & drive guards. See CEMA Safety Label Placement Guidelines on CEMA Web Site: http://www.cemanet.org/safety/guidelines.html
Safety Label Placement Guidelines on CEMA Web Site: http://www.cemanet.org/safety/guidelines.html
PROMINENTLY DISPLAY
PROMINENTLY DISPLAY
THESE
THESE
SAFETY LABELS
SAFETY LABELS
ON
ON
INSTALLED EQUIPMENT
INSTALLED EQUIPMENT
SEE OTHER SIDE FOR SAFETY REMINDERS SEE OTHER SIDE FOR SAFETY REMINDERSNote: Labels alone do not substitute for a thorough in- Note: Labels alone do not substitute for a thorough in- plant safety training program centered on the hazards plant safety training program centered on the hazards
associated with operating your installed equipment. associated with operating your installed equipment. Contact CEMA or Your Equipment Manufacturer for Contact CEMA or Your Equipment Manufacturer for
Replacement Labels Replacement Labels
CONVEYOR EQUIPMENT MANUFACTURERS ASSOCIATION CONVEYOR EQUIPMENT MANUFACTURERS ASSOCIATION
6724 Lone Oak Blvd., Naples, Florida 34109 6724 Lone Oak Blvd., Naples, Florida 34109
239-514-3441 239-514-3441 Exposed screw and
Exposed screw and
moving parts can
moving parts can
cause severe injury
cause severe injury
LOCK
LOCK OUT POWEROUT POWER
before removing before removing cover or servicing cover or servicing CVS930011 CVS930011 CHR930001 CHR930001 Exposed moving Exposed moving
parts can cause
parts can cause
severe injury
severe injury
LOCK OUT POWER
LOCK OUT POWER
before removing before removing g u a r d g u a r d CHS991026 CHS991026 Wa
Walking or lking or standing onstanding on
conveyor covers or
conveyor covers or
gratings can cause
gratings can cause
severe injury severe injury STAY OFF STAY OFF Exposed conveyors Exposed conveyors
and moving parts
and moving parts
can cause severe
can cause severe
i n j u r y
i n j u r y
LOCK
LOCK OUT POWEROUT POWER
before removing before removing cover or servicing cover or servicing CVS930010 CVS930010
Exposed buckets and
Exposed buckets and
moving parts can
moving parts can
cause severe injury
cause severe injury
LOCK OUT POWER
LOCK OUT POWER
before removing before removing cover or servicing cover or servicing CVS930012 CVS930012
WARNING
WARNING
Exposed screw and
Exposed screw and
moving parts can
moving parts can
cause severe injury
cause severe injury
LOCK OUT POWER
LOCK OUT POWER
before removing before removing cover or servicing cover or servicing CHR930011 CHR930011 CEMA Document: SC 2004-01 CEMA Document: SC 2004-01
Table of Contents
Table of Contents
Materials
Materials Classification Classification Code Code Chart Chart Page Page 22 Materials
Materials Characteristics Characteristics Page Page 3-143-14
Capacity
Capacity Table Table Page Page 15-1715-17
Lump
Lump Size Size Table Table Page Page 1818
Horsepower
Horsepower Calculation Calculation Page Page 19-2119-21
Horsepower
Horsepower Nomograph Nomograph Page 22-23Page 22-23
Screw
Screw Conveyor Conveyor Deflection Deflection Page Page 2424 Torque
Torque Rating Rating Page Page 2525
Torque
Torque Nomograph Nomograph Stainless Stainless Steel Steel Page Page 2626 Torque
Torque Nomograph Nomograph Carbon Carbon Steel Steel Page Page 2727 Screw
Screw Flights Flights with with Cuts Cuts and and Folds Folds Page Page 2828 Weld Finishes
Weld Finishes Page 29Page 29
Thermal
Thermal Expansion Expansion Page Page 3030
Descriptive
Descriptive Part Part Numbers Numbers Page Page 3131
Component
Component Selection Selection Page Page 3232
Part
Part Two Two – – Conveyor Conveyor Components Components Page Page 3333 Conveyor
Conveyor Layout Layout Page Page 34-3534-35
Hanger
Hanger Bearings Bearings Page Page 3636
Replacement
Replacement Flighting Flighting Page Page 3737
Sectional
Sectional Screws Screws Page Page 38-3938-39
Sectional
Sectional Flights Flights Page 40Page 40
Sectional
Sectional Screw Screw Ribbons Ribbons Page Page 4141
Troughs
Troughs Page Page 42-4842-48
Discharges
Discharges Page Page 4949
Bulkheads
Bulkheads Page Page 5050
End
End Flanges Flanges Page Page 5151
Clamps
Clamps Page Page 5252
Seals
Seals Page 53-54Page 53-54
Shrouds
Shrouds Page Page 5555
Feet
Feet Page 56Page 56
Saddles
Saddles Page Page 5757
Shafts
Shafts Page Page 58-6058-60
Coupling
Coupling Bolts, Bolts, Internal Internal Collars, Collars, End End Lugs Lugs Page Page 6161 Trough
Trough Ends Ends Page Page 62-6562-65
Trough
Trough End End Bearings Bearings Page Page 66-6766-67
Hanger
Hanger Bearings Bearings Page Page 6868
Hangers
Hangers Page Page 69-7369-73
Gates
Gates Page 74-79Page 74-79
Inlets
Inlets Page Page 8080
Hanger
Hanger Pockets Pockets Page Page 8181
Covers
Covers Page Page 82-8382-83
Cover
Cover Clamps Clamps Page Page 8484
Page 1 Page 1
Material Classificati
Material Classification Code
on Code Chart
Chart
Major Major Class
Class Material Characteristics IncludedMaterial Characteristics Included
Code Code Designation Designation Density
Density Bulk Bulk Density, Density, LooseLoose ActualActual
Lbs/cu. ft. Lbs/cu. ft. Very Fine
Very Fine
No. 200 Sieve (.0029”) And Under No. 200 Sieve (.0029”) And Under No. 100 Sieve (.0059”) And Under No. 100 Sieve (.0059”) And Under No.
No. 40 40 Sieve Sieve (.016”) (.016”) And And UnderUnder
A A200200 A A100100 A A4040 Fi
Finene NoNo. . 6 6 SiSieve eve (.1(.13232”) ”) AnAnd d UnUndeder r BB66 Granular
Granular
½” And Under ½” And Under 3”
3” And And UnderUnder 7”
7” And And UnderUnder
C½ C½ D D33 D D77 *Lumpy *Lumpy 16 “ And Under 16 “ And Under Over 16” To Be Specified Over 16” To Be Specified X = Actual Maximum Size X = Actual Maximum Size
D D1616 D DXX Size Size Irre
Irregulgularar StriStringyngy, , FibrFibrous, ous, CyliCylindrndricalical, , SlabSlabs, s, Etc. Etc. EE
Flowability Flowability
Very Free Flowing – Flow Function > 10 Very Free Flowing – Flow Function > 10 Free Flowing – Flow Function > 4 But < 10 Free Flowing – Flow Function > 4 But < 10 Average Flowability – Flow Function > 2 But < 4 Average Flowability – Flow Function > 2 But < 4 Sluggish – Flow Function < 2
Sluggish – Flow Function < 2
1 1 2 2 3 3 4 4 Abrasiveness Abrasiveness Mildly
Mildly Abrasive Abrasive – – Index Index 1-171-17 Moderately
Moderately Abrasive Abrasive – – Index Index 18-6718-67 Extremely
Extremely Abrasive Abrasive – – Index Index 68-41668-416
5 5 6 6 7 7 Miscellaneous Miscellaneous Properties Properties Or Or Hazards Hazards
Builds Up and Hardens Builds Up and Hardens Generates Static Electricity Generates Static Electricity
Decomposes --- Deteriorates in Storage Decomposes --- Deteriorates in Storage Flammability
Flammability
Becomes Plastic or Tends to Soften Becomes Plastic or Tends to Soften Very Dusty
Very Dusty
Aerates and Becomes Fluid Aerates and Becomes Fluid Explosiveness
Explosiveness Stickiness-Adhesion Stickiness-Adhesion
Contaminable, Affecting Use Contaminable, Affecting Use Degradable, Affecting Use Degradable, Affecting Use
Gives Off Harmful or Toxic Gas or Fumes Gives Off Harmful or Toxic Gas or Fumes Highly Corrosive Highly Corrosive Mildly Corrosive Mildly Corrosive Hygroscopic Hygroscopic
Interlocks, Mats or Agglomerates Interlocks, Mats or Agglomerates Oils Present
Oils Present
Packs Under Pressure Packs Under Pressure
Very Light and Fluffy – May Be Windswept Very Light and Fluffy – May Be Windswept Elevated Temperature Elevated Temperature F F G G H H J J K K L L M M N N O O P P Q Q R R S S T T U U V V W W X X Y Y Z Z HOW TO READ THE MATERIAL CODE FROM MATERIAL CHARACTERISTICS TABLE. HOW TO READ THE MATERIAL CODE FROM MATERIAL CHARACTERISTICS TABLE.
MATERIAL: CHIPS, PULPWOOD MATERIAL: CHIPS, PULPWOOD
Page 2 Page 2
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Acetylenogen (See Calcium Carbide)
Acetylenogen (See Calcium Carbide) Adipic
Adipic Acid Acid 45 45 45A45A10010035 35 30A 30A 0.8 0.8 2B2B
Alfalfa
Alfalfa Meal Meal 14-22 14-22 18B18B6645WY 45WY 30A 30A 0.6 0.6 2D2D
Alfalfa
Alfalfa Pellets Pellets 41-33 41-33 42C½25 42C½25 45 45 0.5 0.5 2D2D Alfalfa
Alfalfa Seeds Seeds 10-15 10-15 13B13B6615N 15N 30B 30B 0.4 0.4 1A-8-C1A-8-C
Almonds,
Almonds, Broken Broken 27-30 27-30 29C½35Q 29C½35Q 30B 30B 0.9 0.9 2D2D Almonds,
Almonds, Whole Whole Shelled Shelled 28-30 28-30 29C½35Q 29C½35Q 30B 30B 0.9 0.9 2D2D Alum,
Alum, Fine Fine 45-50 45-50 48B48B6635U 35U 30A 30A 0.6 0.6 1A-B-C1A-B-C
Alum,
Alum, Lumpy Lumpy 50-60 50-60 55B55B6625 25 30A 30A 1.4 1.4 2A-B2A-B
Alumina
Alumina 55-65 55-65 58B58B6627MY 27MY 15 15 1.8 1.8 3D3D
Alumina,
Alumina, Fines Fines 35 35 35A35A10010027MY 27MY 15 15 1.6 1.6 3D3D
Alumina,
Alumina, Seed Seed or or Briquette Briquette 65 65 65D65D3337 37 15 15 2.0 2.0 3D3D
Aluminate
Aluminate Gel Gel (Aluminate (Aluminate Hydroxide) Hydroxide) 45 45 45B45B6635 35 30B 30B 1.7 1.7 2D2D
Aluminum
Aluminum Chips, Chips, Dry Dry 7-15 7-15 11E45V 11E45V 30A 30A 1.2 1.2 2D2D Aluminum
Aluminum Chips, Chips, Oily Oily 7-15 7-15 11E45V 11E45V 30A 30A 0.8 0.8 2D2D Aluminum
Aluminum Hydrate Hydrate 13-20 13-20 17C½35 17C½35 30A 30A 1.4 1.4 1A-B-C1A-B-C Aluminum Ore (See Bauxite)
Aluminum Ore (See Bauxite) Aluminum
Aluminum Oxide Oxide 60-120 60-120 90A90A10010017M 17M 15 15 1.8 1.8 3D3D
Aluminum
Aluminum Silicate Silicate 49 49 49C½35S 49C½35S 45 45 0.8 0.8 3A-B3A-B Aluminum
Aluminum Sulfate Sulfate 45-58 45-58 52C½25 52C½25 30A 30A 1.0 1.0 1A-B-C1A-B-C Amianthus (See Asbestos-Shredded)
Amianthus (See Asbestos-Shredded) Ammonium
Ammonium Chloride, Chloride, Crystalline Crystalline 45-52 45-52 49A49A10010045FRS 45FRS 30A 30A 0.7 0.7 3A-B3A-B
Ammonium
Ammonium Nitrate Nitrate 45-62 45-62 54A54A404035NTU 35NTU 30A 30A 1.3 1.3 3D3D
Ammonium
Ammonium Sulfate Sulfate 45-58 45-58 52C½35FOTU 52C½35FOTU 30A 30A 1.0 1.0 1A-B-C1A-B-C Andalvsite
Andalvsite (Aluminum (Aluminum Silicate) Silicate) 49 49 49C½35 49C½35 45 45 0.8 0.8 3A-B3A-B Antimony
Antimony Powder Powder AA10010035 35 30B 30B 1.6 1.6 2D2D
Apple
Apple Pomace, Pomace, Dry Dry 15 15 15C½45Y 15C½45Y 30B 30B 1.0 1.0 2D2D Arsenate of Lead (See Lead Arsenate)
Arsenate of Lead (See Lead Arsenate) Arsenic
Arsenic Oxide Oxide (Arsenolite) (Arsenolite) 100-120 100-120 110A110A10010035R35R
Arsenic
Arsenic Pulverized Pulverized 30 30 30A30A10010025R 25R 45 45 0.8 0.8 2D2D
Asbestos-Rock
Asbestos-Rock (Ore) (Ore) 81 81 81D81D3337R 37R 15 15 1.2 1.2 3D3D
Asbestos-Shredded
Asbestos-Shredded 20-40 20-40 30E46XY 30E46XY 30B 30B 1.0 1.0 2D2D Ash,
Ash, Black, Black, Ground Ground 105 105 105B105B6635 35 30A 30A 2.0 2.0 1A-B-C1A-B-C
Ashes,
Ashes, Coal Coal - - Dry Dry - - ½ ½ 35-45 35-45 40C½46TY 40C½46TY 30B 30B 3.0 3.0 3D3D Ashes,
Ashes, Coal Coal - - Dry Dry - - 3 3 35-40 35-40 38D38D3346T 46T 15 15 2.5 2.5 3D3D
Ashes,
Ashes, Coal Coal - - Wet Wet - - ½ ½ 45-50 45-50 48C½46T 48C½46T 30B 30B 3.0 3.0 3D3D Ashes,
Ashes, Coal Coal - - Wet Wet - - 3 3 45-50 45-50 48D48D3346T 46T 15 15 4.0 4.0 3D3D
Asphalt,
Asphalt, Crushed Crushed - - ½ ½ 45 45 45C½45 45C½45 30A 30A 2.0 2.0 1A-B-C1A-B-C Bagasse,
Bagasse, Dry Dry 7-10 7-10 9E45R/XY 9E45R/XY 30A 30A 1.5 1.5 2A-B-C2A-B-C Bakelite,
Bakelite, Fine Fine 30-45 30-45 38B38B6625 25 30A 30A 1.4 1.4 1A-B-C1A-B-C
Baking
Baking Powder Powder 40-55 40-55 48A48A10010035 35 30A 30A 0.6 0.6 1B1B
Baking
Baking Soda Soda (Sodium (Sodium Bicarbonate) Bicarbonate) 40-55 40-55 48A48A10010025 25 30A 30A 1.0 1.0 1B1B
Barite
Barite (Barium (Barium Sulfate) Sulfate) + + ½ ½ - - 3 3 120-180 120-180 150D150D3336 36 15 15 2.6 2.6 3D3D
Barite,
Barite, Powder Powder 120-180 120-180 150A150A10010035X 35X 30B 30B 2.0 2.0 2D2D
Barium
Barium Carbonate Carbonate 72 72 72A72A10010045R 45R 30B 30B 2.0 2.0 3D3D
Bark,
Bark, Wood, Wood, Refuse Refuse 10-20 10-20 15E45TYY 15E45TYY 30B 30B 2.0 2.0 33DD
Page 3 Page 3
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Barley,
Barley, Fine Fine Ground Ground 24-38 24-38 31B31B663535 45 45 0.4 0.4 1A-B-C1A-B-C
Barley,
Barley, Malted Malted 31 31 31C½35 31C½35 30A 30A 0.4 0.4 1A-B-C1A-B-C Barley,
Barley, Meal Meal 28 28 28C½35 28C½35 30A 30A 0.4 0.4 1A-B-C1A-B-C Barley,
Barley, Whole Whole 36-48 36-48 42B42B6625N25N 45 45 0.5 0.5 1A-B-C1A-B-C
Baryte (See Barite) Baryte (See Barite) Basalt
Basalt 80-105 80-105 93B93B662727 15 15 1.8 1.8 3D3D
Bauxite,
Bauxite, Dry, Dry, Ground Ground 68 68 68B68B662525 45 45 1.8 1.8 1A-B-C1A-B-C
Bauxite,
Bauxite, Crushed Crushed – – 3” 3” 75-80 75-80 80D80D333636 15 15 2.5 2.5 3D3D
Beans,
Beans, Castor Castor 36 36 36C½15W 36C½15W 30A 30A 0.8 0.8 1A-B-C1A-B-C Beans,
Beans, Castor, Castor, Meal Meal 35-40 35-40 38B38B6635W35W 30A 30A 0.8 0.8 1A-B-C1A-B-C
Beans,
Beans, Navy Navy – – Dry Dry 48 48 48C½15 48C½15 45 45 0.5 0.5 1A-B-C1A-B-C Beans,
Beans, Navy Navy – – Steeped Steeped 60 60 60C½25 60C½25 45 45 0.8 0.8 1A-B-C1A-B-C Beans, Soy (See Soybeans)
Beans, Soy (See Soybeans) Beet
Beet Pulp Pulp – – Dry Dry 11-1611-16 Beet
Beet Pulp Pulp – – Wet Wet 25-4525-45 Bentonite,
Bentonite, Crude Crude 34-40 34-40 37D37D3345X45X 30B 30B 1.2 1.2 2D2D
Bentonite,
Bentonite, -100 -100 Mesh Mesh 50-60 50-60 55A55A10010025MXY25MXY 30B 30B 0.7 0.7 2D2D
Benzene
Benzene Hexachloride Hexachloride 56 56 56A56A10010045R45R 30A 30A 0.6 0.6 1A-B-C1A-B-C
Bicarbonate
Bicarbonate of of Soda Soda 40-45 40-45 45A45A20020025Y25Y 30A 30A 0.6 0.6 1A-B-C1A-B-C
Blood,
Blood, Dried Dried 35-4535-45 40D40D3345U45U 30A 30A 2.0 2.0 2D2D
Blood,
Blood, Ground, Ground, Dried Dried 30 30 30A30A10010035U35U 30A 30A 1.0 1.0 1A-B1A-B
Bluestone (See Copper Sulfate) Bluestone (See Copper Sulfate) Bone
Bone Ash Ash (Tricalcium (Tricalcium Phosphate) Phosphate) 40-50 40-50 45A45A1001004545 30A 30A 1.6 1.6 1A-B1A-B
Bone
Bone Black Black 20-25 20-25 23A23A10010025Y25Y 30B 30B 1.5 1.5 1A-B1A-B
Bone
Bone Char Char 27-40 27-40 34B34B663535 30B 30B 1.6 1.6 1A-B1A-B
Bones,
Bones, Crushed Crushed 35-50 35-50 43D43D333535 30B 30B 2.0 2.0 2D2D
Bones,
Bones, Ground Ground 50 50 50B50B664545 30B 30B 1.7 1.7 2D2D
Bones,
Bones, Whole Whole 35-50 35-50 43E45V 43E45V 30A 30A 3.0 3.0 D2D2
Bonemeal 50-60
Bonemeal 50-60 55B55B663535 30B 30B 1.7 1.7 2D2D
Borate
Borate of of Lime Lime 60 60 60A60A1001003535 30A 30A 0.6 0.6 1A-B-C1A-B-C
Borax,
Borax, Fine Fine 45-55 45-55 50B50B6625T25T 30B 30B 0.7 0.7 3D3D
Borax,
Borax, Screening- Screening- ½ ½ 55-60 55-60 58C½35 58C½35 30B 30B 1.5 1.5 2D2D Borax,
Borax, 1 1 ½ ½ - - 2 2 Lump Lump 55-60 55-60 58D58D333535 30B 30B 1.8 1.8 2D2D
Borax,
Borax, 2-3 2-3 Lump Lump 60-70 60-70 65D65D333535 30B 30B 2.0 2.0 2D2D
Boric
Boric Acid, Acid, Fine Fine 55 55 55B55B6625T25T 30A 30A 0.8 0.8 3D3D
Boron
Boron 75 75 75A75A1001003737 15 15 1.0 1.0 2D2D
Bran,
Bran, Rice-Rye-Wheat Rice-Rye-Wheat 16-20 16-20 18B18B6635NY35NY 30A 30A 0.5 0.5 1A-B-C1A-B-C
Braunite
Braunite (Manganese (Manganese Oxide) Oxide) 120 120 120A120A1001003636 30B 30B 2.0 2.0 2D2D
Bread
Bread Crumbs Crumbs 20-25 20-25 23B35PQ 23B35PQ 30A 30A 0.6 0.6 1A-B-C1A-B-C Brewer’s
Brewer’s Grain, Grain, Spent Spent – – Dry Dry 14-30 14-30 22C½45 22C½45 30A 30A 0.5 0.5 1A-B-C1A-B-C Brewer’s
Brewer’s Grain, Grain, Spent Spent – – Wet Wet 55-60 55-60 58C½45T 58C½45T 30A 30A 0.8-4.0 0.8-4.0 2A-B2A-B Brick,
Ground-Brick, Ground- 11 / / 88 100-120 100-120 110B110B663737 15 15 2.2 2.2 3D3D
Bronze
Bronze Chips Chips 30-50 30-50 40B40B6625N25N 15 15 2.0 2.0 2D2D
Page 4 Page 4
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Buckwheat 37-42
Buckwheat 37-42 40B40B6625N25N 45 45 0.4 0.4 1A-B-C1A-B-C
Calcine,
Calcine, Flour Flour 75-85 75-85 80A80A1001003535 30A 30A 0.7 0.7 1A-B-C1A-B-C
Calcium
Calcium Carbide Carbide 70-90 70-90 80D80D3325N25N 30B 30B 2.0 2.0 2D2D
Calcium Carbonate (See Limestone) Calcium Carbonate (See Limestone) Calcium Fluoride (See Fluospar) Calcium Fluoride (See Fluospar) Calcium Hydrate (
Calcium Hydrate (See Lime Hydrated)See Lime Hydrated)
Calcium
Calcium Hydroxide (See Lime Hydrated)Hydroxide (See Lime Hydrated)
Calcium
Calcium Lactate Lactate 26-2926-29 28D28D3345QTR45QTR 30A 30A 0.6 0.6 2A-B2A-B
Ca
Calclciuium m MaMagngnesesiuium m CaCarbrbononatatee 9090-1-100 00 3030B B 2.2.0 0 2D2D Calcium Oxide (See Lime, Unflaked)
Calcium Oxide (See Lime, Unflaked) Calcium
Calcium Phosphate Phosphate 40-50 40-50 45A45A1001004545 30A 30A 1.6 1.6 1A-B-C1A-B-C
Calcium Sulfate (See Gypsum) Calcium Sulfate (See Gypsum) Carbon,
Carbon, Activated Activated - - Dry Dry 8-20 8-20 14A14A200200 30B 30B 1.2 1.2 2D2D
Carbon
Carbon Black Black – – Fine Fine 4-6 4-6 5A5A200200 30A 30A 0.4 0.4 1A-B-C1A-B-C
Carbon
Carbon Black Black – – Pelleted Pelleted 20-4020-40
Carborundum 100
Carborundum 100 100D100D332727 15 15 3.0 3.0 2D2D
Casein 36
Casein 36 36B36B663535 30B 30B 1.6 1.6 3D3D
Cashew
Cashew Nuts Nuts 32-3732-37 35C35C½45½45 30A 30A 0.7 0.7 2D2D Cast
Cast Iron, Iron, Chips Chips 130-200130-200 165C165C½45½45 30B 30B 4.0 4.0 2D2D Caustic
Caustic Soda Soda 8888 88B88B6635RSU35RSU 30B 30B 1.8 1.8 2D2D
Caustic
Caustic Soda, Soda, Flakes Flakes 47 47 47C47C½45RSUX ½45RSUX 30A 30A 1.5 1.5 3D3D Celite
Celite (Diatomaceous (Diatomaceous Earth) Earth) 11-17 11-17 14A14A404036Y36Y 15 15 1.6 1.6 2D2D
Cement,
Cement, Clinker Clinker 75-9575-95 85D85D333636 15 15 1.8 1.8 3D3D
Cement,
Cement, Mortar Mortar 133133 133B133B6635Q35Q 30A 30A 3.0 3.0 3D3D
Cement,
Cement, Portland Portland 9494 94A94A10010026M26M 30B 30B 1.4 1.4 2D2D
Cement,
Cement, Aerated Aerated (Portland) (Portland) 60-7560-75 68A68A10010016M16M 30B 30B 1.4 1.4 2D2D
Cerrusite (See Lead Carbonate) Cerrusite (See Lead Carbonate) Chalk,
Chalk, Crushed Crushed 75-95 75-95 85D85D332525 30B 30B 1.9 1.9 2D2D
Chalk, Pulverized
Chalk, Pulverized 67-75 67-75 71A71A10010025MXY25MXY 30B 30B 1.4 1.4 2D2D
Charcoal, Ground
Charcoal, Ground 18-28 18-28 23A23A1001004545 30B 30B 1.2 1.2 2D2D
Charcoal,
Charcoal, Lumps Lumps 18-2818-28 23D23D3345Q45Q 30B 30B 1.4 1.4 2D2D
Chips,
Chips, Pulpwood Pulpwood 12-25 12-25 19C½45T 19C½45T 30A 30A 1.0 1.0 2B2B Chocolate,
Chocolate, Cake Cake Pressed Pressed 40-4540-45 45D45D332525 30A 30A 1.5 1.5 2B2B
Chrome
Chrome Ore Ore 125-140125-140 133D133D333636 15 15 2.5 2.5 3D3D
Cinders,
Cinders, Blast Blast Furnace Furnace 5757 57D57D3336T36T 15 15 1.9 1.9 3D3D
Cinders,
Cinders, Coal Coal 4040 40D40D3336T36T 15 15 1.8 1.8 3D3D
Clay,
Clay, Ceramic Ceramic – – Dry Dry 60-8060-80 70A70A10010035P35P 30A 30A 1.5 1.5 1A-B-C1A-B-C
Clay,
Clay, Calcined Calcined 80-10080-100 90B90B663636 30B 30B 2.4 2.4 3D3D
Clay,
Clay, Brick Brick – – Dry, Dry, Fine Fine 100-120 100-120 110C½36 110C½36 30B 30B 2.0 2.0 3D3D Clay
Clay – – Dry, Dry, Lumpy Lumpy 60-75 60-75 68D68D333535 30A 30A 1.8 1.8 2D2D
Clinker, Cement (See Cement, Clinker) Clinker, Cement (See Cement, Clinker)
Page 5 Page 5
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Coal,
Coal, Anthracite Anthracite (River (River & & Culm) Culm) 55-6155-61 60B60B6635TY35TY 30A 30A 1.0 1.0 2A-B2A-B
Coal,
Coal, Anthracite, Anthracite, - - ½ ½ 49-6149-61 55C55C½25½25 30A 30A 1.0 1.0 2A-B2A-B Coal,
Coal, Bituminous Bituminous Mined Mined 40-6040-60 50D50D3335LNXY35LNXY 30A 30A 0.9 0.9 1A-B1A-B
Coal,
Coal, Bituminous, Bituminous, Mined, Mined, Sized Sized 45-5045-50 48D48D3335QV35QV 30A 30A 1.0 1.0 1A-B1A-B
Coal,
Coal, Bituminous, Bituminous, Mined, Mined, Slack Slack 43-50 43-50 47C½45T 47C½45T 30A 30A 0.9 0.9 2A-B2A-B Coal,
Coal, Lignite Lignite 37-4537-45 41D41D3335T35T 30A 30A 1.0 1.0 2D2D
Cocoa,
Cocoa, Beans Beans 30-4530-45 38C38C½25Q½25Q 30A 30A 0.5 0.5 1A-B1A-B Cocoa
Cocoa Nibs Nibs 3535 35C35C½25½25 30A 30A 0.5 0.5 1A-B1A-B Cocoa,
Cocoa, Powdered Powdered 30-35 30-35 33A33A10010045XY45XY 30A 30A 0.9 0.9 1A-B1A-B
Coconut,
Coconut, Shredded Shredded 20-2220-22 21E4521E45 30A 30A 1.5 1.5 2B2B Coffee,
Coffee, Chaff Chaff 2020 20B20B6625MY25MY 30A 30A 1.0 1.0 1A-B1A-B
Coffee,
Coffee, Green Green Bean Bean 25-32 25-32 29C½25PQ 29C½25PQ 30A 30A 0.5 0.5 1A-B1A-B Coffee,
Coffee, Ground Ground Dry Dry 2525 25A25A404035P35P 30A 30A 0.6 0.6 1A-B1A-B
Coffee,
Coffee, Ground Ground Net Net 35-4535-45 40A40A404045X45X 30A 30A 0.6 0.6 1A-B1A-B
Coffee,
Coffee, Roasted Roasted Bean Bean 20-30 20-30 25C½PQ 25C½PQ 45 45 0.4 0.4 1B1B Coffee,
Coffee, Soluble Soluble 1919 19A19A404035PUY35PUY 15 15 0.8 0.8 1B1B
Coke,
Coke, Breeze Breeze 25-3525-35 30C30C½37½37 15 15 1.2 1.2 3D3D Coke,
Coke, Loose Loose 23-3523-35 30D30D773737 15 15 1.2 1.2 3D3D
Coke,
Coke, Calcined Calcined 35-4535-45 40D40D773737 15 15 1.3 1.3 3D3D
Compost 30-50
Compost 30-50 40D40D7745TV45TV 30A 30A 1.0 1.0 3A-B3A-B
Concrete,
Concrete, Pre Pre Mix Mix Dry Dry 85-120 85-120 103C½36V 103C½36V 30B 30B 3.0 3.0 3D3D Copper
Copper Ore Ore 120-150120-150 135Cx36135Cx36 15 15 4.0 4.0 3D3D Copper
Copper Ore, Ore, Crushed Crushed 100-150100-150 125D125D333636 15 15 4.0 4.0 3D3D
Copper
Copper Sulphate Sulphate (Bluestone) (Bluestone) 60-7060-70 65C65C½35½35 30A 30A 1.0 1.0 2A-B-C2A-B-C Copperas (See Ferrous Sulfate)
Copperas (See Ferrous Sulfate) Copra
Copra Cake Cake Ground Ground 40-4540-45 43B43B6645HW45HW 30A 30A 0.7 0.7 1A-B-C1A-B-C
Copra,
Copra, Cake Cake Lumpy Lumpy 25-3025-30 28D28D3335HW35HW 30A 30A 0.8 0.8 2A-B-C2A-B-C
Copra,
Copra, Lumpy Lumpy 2222 22E35HW22E35HW 30A 30A 1.0 1.0 2A-B-C2A-B-C Copra, Meal
Copra, Meal 40-45 40-45 42B42B6635HW35HW 30A 30A 0.7 0.7 2D2D
Cork, Ground Fine
Cork, Ground Fine 5-15 5-15 10B10B6635JNY35JNY 30A 30A 0.5 0.5 1A-B-C1A-B-C
Cork,
Cork, Granulated Granulated 12-1512-15 14C14C½35JY½35JY 30A 30A 0.5 0.5 1A-B-C1A-B-C Corn,
Corn, Cracked Cracked 40-50 40-50 45B45B6625P25P 30A 30A 0.7 0.7 1A-B-C1A-B-C
Corn
Corn Cobs, Cobs, Ground Ground 1717 17C17C½25Y½25Y 30A 30A 0.6 0.6 1A-B-C1A-B-C Corn
Corn Cobs, Cobs, Whole Whole 12-1512-15 14E3514E35 30A 30A 2A-B2A-B Corn
Corn Ear Ear 5656 56E3556E35 30A 30A 2A-B2A-B
Corn
Corn Germ Germ 2121 21B21B6635PY35PY 30A 30A 0.4 0.4 1A-B-C1A-B-C
Corn/Grits 40-45
Corn/Grits 40-45 43B43B6635P35P 30A 30A 0.5 0.5 1A-B-C1A-B-C
Cornmeal 32-40
Cornmeal 32-40 43B43B6635P35P 30A 30A 0.5 0.5 1A-B1A-B
Corn
Corn Oil, Oil, Cake Cake 25 25 25D25D7745HW45HW 30A 30A 0.6 0.6 1A-B1A-B
Corn
Corn Seed Seed 4545 45C45C½25PQ½25PQ 45 45 0.4 0.4 1A-B-C1A-B-C
Page 6 Page 6
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Corn,
Corn, Shelled Shelled 4545 45C½2545C½25 45 45 0.4 0.4 1A-B-C1A-B-C Corn
Corn Sugar Sugar 30-3530-35 33B33B6635PU35PU 30A 30A 1.0 1.0 1B1B
Cottonseed,
Cottonseed, Cake, Cake, Crushed Crushed 40-4540-45 43C½45HW43C½45HW 30A 30A 1.0 1.0 1A-B1A-B Cottonseed,
Cottonseed, Cake, Cake, Lumpy Lumpy 40-4540-45 43D43D7745HW45HW 30A 30A 1.0 1.0 2A-B2A-B
Cottonseed
Cottonseed – – Dry, Dry, Delinted Delinted 22-40 22-40 31C31C½25X½25X 30A 30A 0.6 0.6 1A-B1A-B Cottonseed
Cottonseed – – Dry, Dry, Undelinted Undelinted 18-2518-25 22C½35XY22C½35XY 30A 30A 0.8 0.8 1A-B1A-B Cottonseed,
Cottonseed, Flakes Flakes 20-2520-25 23C½35HWY23C½35HWY 30A 30A 0.8 0.8 1A-B1A-B Cottonseed,
Cottonseed, Hulls Hulls 1212 12B12B6645HW45HW 30A 30A 0.5 0.5 3A-B3A-B
Cottonseed,
Cottonseed, Meal, Meal, Expeller Expeller 25-3025-30 28B28B6645HW45HW 30A 30A 0.5 0.5 3A-B3A-B
Cottonseed,
Cottonseed, Meal, Meal, Extracted Extracted 35-4035-40 37B37B6635HW35HW 30A 30A 0.5 0.5 1A-B1A-B
Cottonseed,
Cottonseed, Meats Meats – – Dry Dry 4040 40B40B6635HW35HW 30A 30A 0.6 0.6 1A-B1A-B
Cottonseed,
Cottonseed, Meats Meats – – Rolled Rolled 35-40 35-40 45D45D3345HW45HW 30A 30A 1.3 1.3 2A-B-C2A-B-C
Cracklings,
Cracklings, Crushed Crushed 40-5040-50 45D45D3345HW45HW 30A 30A 1.3 1.3 2A-B-C2A-B-C
Cryolite,
Cryolite, Dust Dust 75-9075-90 83A83A1001003636 30B 30B 2.0 2.0 2D2D
Cryolite,
Cryolite, Lumpy Lumpy 90-110 90-110 100D100D16163636 30B 30B 2.0 2.0 2D2D
Cullet,
Cullet, Fine Fine 80-12080-120 100C½37100C½37 15 15 2.0 2.0 3D3D Cullet,
Cullet, Lump Lump 80-12080-120 100D100D16163737 15 15 2.5 2.5 3D3D
Cupric Sulphate (See Copper Sulfate) Cupric Sulphate (See Copper Sulfate) Diatomaceous
Diatomaceous Earth Earth 11-1711-17 14A14A404036Y36Y 30B 30B 1.6 1.6 3D3D
Dicalcium
Dicalcium Phosphate Phosphate 40-5040-50 45A45A40403535 30A 30A 1.6 1.6 1A-B-C1A-B-C
Disodium
Disodium Phosphate Phosphate 25-31 25-31 28A28A40403535 30B 30B 0.5 0.5 3D3D
Dolomite (Calcium Magnesium Dolomite (Calcium Magnesium Carbonate),
Carbonate), Crushed Crushed 80-10080-100 90C½26T90C½26T 30B 30B 2.0 2.0 2D2D Dolomite
Dolomite (Cal. (Cal. Mag. Mag. Carbonite) Carbonite) 90-10090-100 95Dx3695Dx36 30B 30B 2.0 2.0 2D2D Earth,
Earth, Loam, Loam, Dry Dry Loose Loose 7676 76C½3676C½36 30B 30B 1.2 1.2 2D2D Ebonite,
Ebonite, Crushed Crushed 63-7063-70 67CY67CY223535 30A 30A 0.8 0.8 1A-B-C1A-B-C
Egg
Egg Powder Powder 1616 16A16A404035MPY35MPY 30A 30A 1.0 1.0 1B1B
Epsom
Epsom Salt Salt (Mag. (Mag. Sulfate) Sulfate) 40-5040-50 45A45A404035U35U 30A 30A 0.8 0.8 1A-B-C1A-B-C
Ethanedioic Acid (See Oxalic Acid) Ethanedioic Acid (See Oxalic Acid) Feldspar, Ground
Feldspar, Ground 65-8065-80 73A73A1001003737 30B 30B 2.0 2.0 2D2D
Feldspar,
Feldspar, Powder Powder 100100 100A100A2002003636 30B 30B 2.0 2.0 2D2D
Feldspar,
Feldspar, Lumps Lumps 90-10090-100 95D95D773737 30B 30B 2.0 2.0 2D2D
Feldspar,
Feldspar, Screenings Screenings 75-8075-80 78C½3778C½37 30B 30B 2.0 2.0 2D2D Ferrous Sulfide –
Ferrous Sulfide – ½½ 120-135120-135 128C½26128C½26 30B 30B 2.0 2.0 1A-B-C1A-B-C Ferrous
Ferrous Sulfide Sulfide – – 100M 100M 105-120105-120 113A113A1001003636 30B 30B 2.0 2.0 1A-B-C1A-B-C
Ferrous
Ferrous Sulfate Sulfate 50-7550-75 63C½35U63C½35U 30B 30B 1.0 1.0 2D2D Fish
Fish Meal Meal 35-4035-40 38C½45HP38C½45HP 30A 30A 1.0 1.0 1A-B-C1A-B-C Fish
Fish Scrap Scrap 40-5040-50 45D45D7745H45H 30A 30A 1.5 1.5 2A-B-C2A-B-C
Flaxseed 43-45
Flaxseed 43-45 44B44B6635X35X 45 45 0.4 0.4 1A-B-C1A-B-C
Flaxseed
Flaxseed Cake Cake (Linseed (Linseed Cake) Cake) 48-5048-50 49D49D7745W45W 30A 30A 0.7 0.7 2A-B2A-B
Page 7 Page 7
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Flaxseed
Flaxseed Meal Meal (Linseed (Linseed Meal) Meal) 25-4525-45 35B35B6645W45W 30A 30A 0.4 0.4 1A-B1A-B
Flour,
Flour, Wheat Wheat 33-4033-40 37A37A404045LP45LP 30A 30A 0.6 0.6 1B1B
Flue
Flue Dust, Dust, Basic Basic Oxygen Oxygen Furnace Furnace 45-6045-60 53A53A404036LM36LM 15 15 3.5 3.5 3D3D
Flue
Flue Dust, Dust, Blast Blast Furnace Furnace 110-125110-125 118A118A40403636 15 15 3.5 3.5 3D3D
Flue
Flue Dust, Dust, Boiler Boiler H. H. Dry Dry 30-45 30-45 38A38A404036LM36LM 15 15 2.0 2.0 3D3D
Fluorspar,
Fluorspar, Fine Fine 80-10080-100 90B90B663636 30B 30B 2.0 2.0 2D2D
Fluorspar,
Fluorspar, Lumps Lumps 90-11090-110 100D100D773636 30B 30B 2.0 2.0 2D2D
Flyash
Flyash – – Dry Dry 30-4530-45 38A38A404036M36M 15 15 3.5 3.5 3D3D
Foundry Sand – Dry (See Sand) Foundry Sand – Dry (See Sand) Fuller’s
Fuller’s Earth Earth – – Dry Dry Raw Raw 30-4030-40 35A35A40402525 30B 30B 2.0 2.0 2D2D
Fuller’s
Fuller’s Earth, Earth, Oily, Oily, Spent Spent 60-6560-65 63C½45OW63C½45OW 15 15 2.0 2.0 3D3D Fuller’s
Fuller’s Earth Earth Calcined Calcined 4040 40A40A1001002525 15 15 2.0 2.0 3D3D
Galena (See Lead Sulfide) Galena (See Lead Sulfide) Gelatin,
Gelatin, Granulated Granulated 3232 32B32B6635PU35PU 30A 30A 0.8 0.8 1B1B
Gilsonite 37
Gilsonite 37 37C½3537C½35 30B 30B 1.5 1.5 3D3D
Glass,
Glass, Batch Batch 80-10080-100 90C½3590C½35 30B 30B 1.5 1.5 3D3D Glue,
Glue, Ground Ground 4040 40B40B6645U45U 30B 30B 1.7 1.7 2D2D
Glue,
Glue, Pearl Pearl 4040 40C½35U40C½35U 45 45 0.5 0.5 1A-B-C1A-B-C Glue,
Glue, Veg. Veg. Powdered Powdered 4040 40A40A404045U45U 30A 30A 0.6 0.6 1A-B-C1A-B-C
Gluten,
Gluten, Meal Meal 4040 40B40B6635P35P 30A 30A 0.6 0.6 1B1B
Grains,
Grains, Distillery, Distillery, Spent Spent Dry Dry 3030 30D30D333535 30A 30A 0.5 0.5 2D2D
Grains,
Grains, Distillery, Distillery, Spent Spent Wet Wet 40-6040-60 50C½45V50C½45V 30A 30A 0.8 0.8 3A-B3A-B Graphite
Graphite Flake Flake 4040 40B40B6625LP25LP 30A 30A 0.5 0.5 1A-B-C1A-B-C
Graphite
Graphite Flour Flour 2828 28A28A10010035LMP35LMP 45 45 0.5 0.5 1A-B-C1A-B-C
Graphite
Graphite Ore Ore 65-7565-75 70D35L70D35L 30A 30A 1.0 1.0 2D2D Granite,
Granite, Fine Fine 80-9080-90 85C½2785C½27 15 15 2.5 2.5 3D3D Grape
Grape Pomace Pomace 15-2015-20 18D18D3345U45U 30B 30B 1.4 1.4 2D2D
Grass
Grass Seed Seed 10-3210-32 11B11B6625PY25PY 30A 30A 0.4 0.4 1A-B-C1A-B-C
Guano – Dry
Guano – Dry 70 70 70C½3570C½35 30 30 2.0 2.0 3A-B3A-B
Gypsum, Calcined
Gypsum, Calcined 55-60 55-60 58B58B6635U35U 30B 30B 1.6 1.6 2D2D
Gypsum,
Gypsum, Calcined, Calcined, Powdered Powdered 60-8060-80 70A70A10010035U35U 30B 30B 2.0 2.0 2D2D
Gypsum,
Gypsum, Raw Raw – – 1 1 70-8070-80 75D75D332525 30B 30B 2.0 2.0 2D2D
Hay,
Hay, Chopped Chopped 8-128-12 10C½35JY10C½35JY 30A 30A 1.6 1.6 2A-B2A-B Hexanedioic
Hexanedioic Acid Acid 4545 45A45A1001003535 30A 30A 0.8 0.8 2B2B
Hominy 35-50
Hominy 35-50 43C½25D43C½25D 30A 30A 0.4 0.4 1A-B-C1A-B-C
Hops,
Hops, Spent Spent – – Dry Dry 3535 35D35D333535 30A 30A 1.0 1.0 2A-B-C2A-B-C
Hops,
Hops, Spent Spent – – Wet Wet 50-5550-55 53D53D3345V45V 30A 30A 1.5 1.5 2A-B2A-B
Ice,
Ice, Crushed Crushed 35-4535-45 40D40D3335Q35Q 30A 30A 0.4 0.4 2A-B2A-B
Ice,
Ice, Flaked Flaked 40-4540-45 43C½35Q43C½35Q 30A 30A 0.6 0.6 1B1B Ice
Ice Cubes Cubes 33-3533-35 34D34D3335Q35Q 30A 30A 0.4 0.4 1B1B
Page 8 Page 8
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Ice,
Ice, Shell Shell 33-3533-35 34D34D3345Q45Q 30A 30A 0.4 0.4 1B1B
Ilmenite
Ilmenite Ore Ore 140-160140-160 150D150D333737 15 15 2.0 2.0 3D3D
Iron
Iron Ore Ore Concentrate Concentrate 120-180120-180 150A150A40403737 15 15 2.2 2.2 3D3D
Iron
Iron Oxide, Oxide, Pigment Pigment 2525 25A25A10010036LMP36LMP 30B 30B 1.0 1.0 1A-B-C1A-B-C
Iron
Iron Oxide, Oxide, Millscale Millscale 7575 75C½3675C½36 30B 30B 1.6 1.6 2D2D Iron Pyrites (See Ferrous Sulfide)
Iron Pyrites (See Ferrous Sulfide) Iron Sulphate (See Ferrous Sulphate) Iron Sulphate (See Ferrous Sulphate) Iron Sulfide (See Ferrous Sulfide) Iron Sulfide (See Ferrous Sulfide) Iron Vitriol (See Ferrous Sulphate) Iron Vitriol (See Ferrous Sulphate) Kafir
Kafir (Corn) (Corn) 40-4540-45 43C½2543C½25 30A 30A 0.5 0.5 3D3D Kaolin
Kaolin Clay Clay 6363 63D63D332525 30A 30A 2.0 2.0 2D2D
Kaolin
Kaolin Clay Clay – – Tale Tale 42-5642-56 49A49A404035LMP35LMP 30B 30B 2.0 2.0 2D2D
Kryalith (See Cryolith) Kryalith (See Cryolith)
Lactose 32
Lactose 32 32A32A404035PU35PU 30A 30A 0.6 0.6 1B1B
Lamp Black (See Carbon Black) Lamp Black (See Carbon Black) Lead
Lead Arsenate Arsenate 7272 72A72A404035R35R 30A 30A 1.4 1.4 1A-B-C1A-B-C
Lead
Lead Arsenite Arsenite 7272 72A72A404035R35R 30A 30A 1.4 1.4 1A-B-C1A-B-C
Lead
Lead Carbonate Carbonate 240-260240-260 250A250A404035R35R 30B 30B 1.0 1.0 2D2D
Lead Ore –
Lead Ore – 11 / / 88 200-270200-270 235B235B663636 15 15 1.4 1.4 3D3D
Lead Ore –
Lead Ore – ½½ 180-230180-230 205C½36205C½36 15 15 1.4 1.4 3D3D Lead
Lead Oxide Oxide (Red (Red Lead) Lead) 30-15030-150 90A90A10010035P35P 30B 30B 1.2 1.2 2D2D
Lead
Lead Oxide Oxide (Red (Red Lead) Lead) 30-18030-180 105A105A20020035LP35LP 30B 30B 1.2 1.2 2D2D
Lead
Lead Sulfide Sulfide 240-260240-260 250A250A10010035R35R 30B 30B 1.0 1.0 2D2D
Lignite (See Coal Lignite) Lignite (See Coal Lignite) Limanite,
Limanite, Ore, Ore, Brown Brown 120120 120C½47120C½47 15 15 1.7 1.7 3D3D Lime,
Lime, Ground, Ground, Unflaked Unflaked 60-6560-65 63B63B6635U35U 30A 30A 0.6 0.6 1A-B-C1A-B-C
Lime
Lime Hydrated Hydrated 4040 40B40B6635LM35LM 30A 30A 0.8 0.8 2D2D
Lime,
Lime, Hydrated, Hydrated, Pulverized Pulverized 32-4032-40 36A36A404035LM35LM 30A 30A 0.6 0.6 1A-B1A-B
Lime, Pebble
Lime, Pebble 53-56 53-56 55C½25HU55C½25HU 30A 30A 2.0 2.0 2A-B2A-B Limestone, Agricultural
Limestone, Agricultural 68 68 68B68B663535 30B 30B 2.0 2.0 2D2D
Limestone,
Limestone, Crushed Crushed 85-9085-90 88Dx3688Dx36 30B 30B 2.0 2.0 2D2D Limestone
Limestone Dust Dust 55-9555-95 75A75A404046MY46MY 30B 30B 2.0 2.0 2D2D
Lindane (See Benzene Hexachoride) Lindane (See Benzene Hexachoride) Linseed (See Flaxseed)
Linseed (See Flaxseed) Litharge (See Lead Oxide) Litharge (See Lead Oxide)
Lithopone 45-50
Lithopone 45-50 48A48A32532535MR35MR 30A 30A 1.0 1.0 1A-B1A-B
Maize (See Milo) Maize (See Milo) Malt,
Malt, Dry, Dry, Ground Ground 20-3020-30 25C25C6635NP35NP 30A 30A 0.5 0.5 1A-B-C1A-B-C
Malt,
Malt, Dry, Dry, Whole Whole 20-3020-30 25C½35N25C½35N 30A 30A 0.5 0.5 1A-B-C1A-B-C Malt,
Malt, Meal Meal 36-4036-40 38B38B6625P25P 30A 30A 0.4 0.4 1A-B-C1A-B-C
Page 9 Page 9
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Malt,
Malt, Sprouts Sprouts 13-1513-15 14C½35P14C½35P 30A 30A 0.4 0.4 1A-B-C1A-B-C Magnesium
Magnesium Chloride Chloride (Magnesite) (Magnesite) 3333 33C½4533C½45 30A 30A 1.0 1.0 1A-B1A-B Manganese
Manganese Dioxide Dioxide 70-8570-85 78A78A10010035NRT35NRT 30A 30A 1.5 1.5 2A-B2A-B
Manganese
Manganese Ore Ore 125-140125-140 133Dx37133Dx37 15 15 2.0 2.0 3D3D Manganese
Manganese Oxide Oxide 120120 120A120A1001003636 30B 30B 2.0 2.0 2D2D
Manganese
Manganese Sulfate Sulfate 7070 70C½3770C½37 15 15 2.4 2.4 3D3D Marble,
Marble, Crushed Crushed 80-9580-95 88B88B663737 15 15 2.0 2.0 3D3D
Marl,
Marl, (Clay) (Clay) 8080 880Dx36880Dx36 30B 30B 1.6 1.6 2D2D Meat,
Meat, Ground Ground 50-5550-55 53E45HQTX53E45HQTX 30B 30B 1.5 1.5 2A-B2A-B Meat,
Meat, Scrap Scrap (w/bone) (w/bone) 4040 40E46H40E46H 30B 30B 1.5 1.5 2D2D Mica,
Mica, Flakes Flakes 17-2217-22 20B20B6616MY16MY 30B 30B 1.0 1.0 2D2D
Mica,
Mica, Ground Ground 13-1513-15 14B14B663636 30B 30B 0.9 0.9 2D2D
Mica,
Mica, Pulverized Pulverized 13-1513-15 14A14A10010036M36M 30B 30B 1.0 1.0 2D2D
Milk,
Milk, Dried, Dried, Flake Flake 5-65-6 6B6B6635PUY35PUY 30A 30A 0.4 0.4 1B1B
Milk,
Milk, Malted Malted 27-3027-30 29A29A404045PX45PX 30A 30A 0.9 0.9 1B1B
Milk,
Milk, Powdered Powdered 20-4520-45 33B33B6625PM25PM 30A 30A 0.5 0.5 1B1B
Milk
Milk Sugar Sugar 3232 32A32A10010035PX35PX 30A 30A 0.6 0.6 1B1B
Mill
Mill Scale Scale (Steel) (Steel) 120-125120-125 123E46T123E46T 3.0 3.0 3D3D Milo,
Milo, Ground Ground 32-3632-36 34B34B662525 30A 30A 0.5 0.5 1A-B-C1A-B-C
Milo,
Milo, Maize Maize (Kafir) (Kafir) 40-4540-45 43B43B6615N15N 30A 30A 0.4 0.4 1A-B-C1A-B-C
Molybdenite
Molybdenite Powder Powder 107107 107B107B662626 30B 30B 1.5 1.5 2D2D
Monosodium
Monosodium Phosphate Phosphate 5050 50B50B663636 30B30B 0.6/2.00.6/2.0 2D2D
Mortar,
Mortar, Wet Wet 150150 150E46T150E46T 30B 30B 3.0 3.0 3D3D
Mustard
Mustard Seed Seed 4545 45B45B6615N15N 45 45 0.4 0.4 1A-B-C1A-B-C
Naphthalene
Naphthalene Flakes Flakes 4545 45B45B663535 30B 30B 0.7 0.7 1A-B-C1A-B-C
Niacin
Niacin (Nicotinic (Nicotinic Acid) Acid) 3535 35A35A404035P35P 30B 30B 0.8 0.8 2D2D
Oat Hulls
Oat Hulls 8-12 8-12 10B10B6635NY35NY 30A 30A 0.5 0.5 1A-B-C1A-B-C
Oats
Oats 26 26 26C½25MN26C½25MN 45 45 0.4 0.4 1A-B-C1A-B-C
Oats,
Oats, Crimped Crimped 19-2619-26 23C½3523C½35 45 45 0.5 0.5 1A-B-C1A-B-C Oats,
Oats, Crushed Crushed 2222 22B22B6645NY45NY 30A 30A 0.6 0.6 1A-B-C1A-B-C
Oats,
Oats, Flour Flour 3535 35A35A1001003535 30A 30A 0.5 0.5 1A-B-C1A-B-C
Oats,
Oats, Rolled Rolled 19-2419-24 22C½35NY22C½35NY 30A 30A 0.6 0.6 1A-B-C1A-B-C Oleo
Oleo Margarine Margarine 5959 59E45HKPWZ59E45HKPWZ 30A 30A 0.4 0.4 2A-B2A-B Orange,
Orange, Peel, Peel, Dry Dry 1515 15E4515E45 15 15 1.5 1.5 2A-B2A-B Oxalic
Oxalic Acid Acid 6060 60B60B6635QS35QS 30A 30A 1.0 1.0 1A-B1A-B
Oyster
Oyster Shells, Shells, Ground Ground 50-6050-60 55C½36T55C½36T 30B 30B 2.0 2.0 3D3D Oyster
Oyster Shells, Shells, Whole Whole 8080 80D80D3336TV36TV 30B 30B 2.5 2.5 3D3D
Paper
Paper Pulp Pulp (4% (4% or or less) less) 6262 62E4562E45 30A 30A 2.0 2.0 2A-B2A-B Paper
Paper Pulp Pulp (6% (6% to to 15%) 15%) 60-6260-62 61E4561E45 30A 30A 2.0 2.0 2A-B2A-B Paraffin Cake
--Paraffin Cake -- ½½ 4545 45C½45K45C½45K 30A 30A 0.6 0.6 1A-B1A-B Peanuts,
Peanuts, Clean, Clean, In In Shell Shell 15-2015-20 18D18D3335Q35Q 30A 30A 0.6 0.6 2A-B2A-B
Page 10 Page 10
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Peanut
Peanut Meal Meal 3030 30B30B6635P35P 30A 30A 0.6 0.6 1B1B
Peanuts,
Peanuts, Raw, Raw, Unshelled Unshelled 15-2015-20 18D18D3336Q36Q 30A 30A 0.7 0.7 3D3D
Peanuts,
Peanuts, Shelled Shelled 35-4535-45 40C½35Q40C½35Q 30A 30A 0.4 0.4 1B1B Peas,
Peas, Dried Dried 45-5045-50 48C½15NQ48C½15NQ 45 45 0.5 0.5 1A-B-C1A-B-C Perlite,
Perlite, Expanded Expanded 8-128-12 10C½3610C½36 30B 30B 0.6 0.6 2D2D Phosphate
Phosphate Acid Acid Fertilizer Fertilizer 6060 60B60B6625T25T 30A30A 1.4/2.51.4/2.5 2A-B2A-B
Phosphate
Phosphate DisodiumDisodium ((See Sod.See Sod. Phosphate)Phosphate)
Phosphate
Phosphate Rock, Rock, Broken Broken 75-8575-85 80D3680D36 30B 30B 2.5 2.5 2D2D Phosphate
Phosphate Rock, Rock, Pulverized Pulverized 6060 60B60B663636 30 30 1.7 1.7 2D2D
Phosphate
Phosphate Sand Sand 90-10090-100 95B95B663737 15 15 2.5 2.5 3D3D
Plaster of Paris (See Gypsum) Plaster of Paris (See Gypsum) Plumbago (See Graphite) Plumbago (See Graphite) Polystyrene
Polystyrene Beads Beads 4040 40B40B6635PQ35PQ 30A 30A 0.4 0.4 1B1B
Polyvinyl,
Polyvinyl, Chloride Chloride Powder Powder 20-3020-30 25A25A10010045KT45KT 30A 30A 1.0 1.0 2B2B
Polyvinyl,
Polyvinyl, Chloride Chloride Pellets Pellets 20-3020-30 25E45KT25E45KT 30A 30A 1.0 1.0 2B2B Polyethylene,
Polyethylene, Resin Resin Pellets Pellets 30-3530-35 33C½45Q33C½45Q 30A 30A 0.4 0.4 1A-B1A-B Potash
Potash (Muriate (Muriate of of Potash) Potash) 7070 70B70B663737 15 15 2.0 2.0 3D3D
Potash
Potash (Muriate (Muriate Mine Mine Run) Run) 7575 75Dx3775Dx37 15 15 2.0 2.0 3D3D Potassium
Potassium Carbonate Carbonate 5151 51B51B663636 30B30B 1.01.0 2D2D
Potassium
Potassium Chloride, Chloride, Pellets Pellets 120-130120-130 125C½25TU125C½25TU 30B 30B 1.6 1.6 3D3D Potassium Nitrate
-Potassium Nitrate -½½ 7676 76C½16NT76C½16NT 30B 30B 1.2 1.2 3D3D Potassium Nitrate –
Potassium Nitrate – 11 / / 88 8080 80B80B6626NT26NT 30A 30A 1.2 1.2 3D3D
Potassium
Potassium Sulfate Sulfate 42-4842-48 45B45B6646X46X 30B 30B 1.0 1.0 2D2D
Potato
Potato Flour Flour 4848 48A48A20020035MNP35MNP 30A 30A 0.5 0.5 1A-B1A-B
Pumice –
Pumice – 11 / / 88 42-4842-48 45B45B664646 15 15 1.5 1.5 3D3D
Pyrite, Pellets
Pyrite, Pellets 120-130120-130 125C½125C½2626 30B 30B 2.0 2.0 3D3D Quartz – 100 Mesh
Quartz – 100 Mesh 70-80 70-80 75A75A1001002727 15 15 1.7 1.7 3D3D
Quartz
-Quartz - ½½ 80-9080-90 85C½2785C½27 15 15 2.02.0
Rice,
Rice, Bran Bran 2020 20B20B6635NY35NY 30A 30A 0.4 0.4 1A-B-C1A-B-C
Rice,
Rice, Grits Grits 42-4542-45 44B44B6635P35P 30A 30A 0.4 0.4 1A-B-C1A-B-C
Rice,
Rice, Polished Polished 3030 30C½15P30C½15P 30A 30A 0.4 0.4 1A-B-C1A-B-C Rice,
Rice, Hulled Hulled 45-4945-49 47C½25P47C½25P 45 45 0.4 0.4 1A-B-C1A-B-C Rice,
Rice, Hulls Hulls 20-2120-21 21B21B6635NY35NY 45 45 0.4 0.4 1A-B-C1A-B-C
Rice,
Rice, Rough Rough 32-3632-36 34C½35N34C½35N 30A 30A 0.6 0.6 1A-B-C1A-B-C Rosin
-Rosin - ½½ 65-6865-68 67C½45Q67C½45Q 30A 30A 1.5 1.5 1A-B-C1A-B-C Rubber,
Rubber, Reclaimed, Reclaimed, Ground Ground 23-5023-50 37C½45Q37C½45Q 30A 30A 0.8 0.8 1A-B-C1A-B-C Rubber,
Rubber, Pelleted Pelleted 50-5550-55 53D53D334545 30A 30A 1.5 1.5 2A-B-C2A-B-C
Rye 42-48
Rye 42-48 45B45B6615N15N 45 45 0.4 0.4 1A-B-C1A-B-C
Rye
Rye Bran Bran 15-2015-20 18B18B6635Y35Y 45 45 0.4 0.4 1A-B-C1A-B-C
Rye
Rye Feed Feed 3333 33B33B663535 30A 30A 0.5 0.5 1A-B-C1A-B-C
Rye
Rye Meal Meal 45-5045-50 38B38B663535 30A 30A 0.5 0.5 1A-B-C1A-B-C
Rye,
Rye, Middlings Middlings 4242 42B42B663535 30A 30A 0.5 0.5 1A-B-C1A-B-C
Page 11 Page 11
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Rye,
Rye, Shorts Shorts 32-3332-33 33C½3533C½35 30A 30A 0.5 0.5 2A-B2A-B Safflower,
Safflower, Cake Cake 5050 50D50D332626 30A 30A 0.6 0.6 2D2D
Safflower,
Safflower, Meal Meal 5050 50B50B663535 30A30A 0.60.6 1A-B-C1A-B-C
Safflower,
Safflower, Seed Seed 4545 45B45B6615N15N 45 45 0.4 0.4 1A-B-C1A-B-C
Saffron (See Safflower) Saffron (See Safflower) Salt Ammoniac
Salt Ammoniac (See Ammonium Chloride)(See Ammonium Chloride)
Salt
Salt Cake, Cake, Dry, Dry, Coarse Coarse 8585 85B85B6636TU36TU 30B 30B 2.1 2.1 3D3D
Salt
Salt Cake, Cake, Dry, Dry, Pulverized Pulverized 65-8565-85 75B75B6636TU36TU 30B 30B 1.7 1.7 3D3D
Salicylic
Salicylic Acid Acid 2929 29B29B6637U37U 30A 30A 0.6 0.6 3D3D
Salt,
Salt, Dry, Dry, Coarse Coarse 45-6045-60 53C½36TU53C½36TU 30B 30B 1.0 1.0 3D3D Salt,
Salt, Dry, Dry, Fine Fine 70-8070-80 75B75B6636TU36TU 30B 30B 1.7 1.7 3D3D
Saltpeter (See Potassium Nitrate) Saltpeter (See Potassium Nitrate) Sand,
Sand, Dry Dry Bank Bank (Damp) (Damp) 110-130110-130 120B120B664747 15 15 2.8 2.8 3D3D
Sand,
Sand, Dry Dry Bank Bank (Dry) (Dry) 90-11090-110 100B100B663737 15 15 1.7 1.7 3D3D
Sand,
Sand, Dry Dry Silica Silica 90-10090-100 95D95D3337Z37Z 15 15 2.6 2.6 3D3D
Sand,
Sand, Foundry Foundry (Shake (Shake Out) Out) 90-10090-100 95D95D3337Z37Z 1515 2.62.6 3D3D
Sand
Sand (Resin (Resin Coated) Coated) Silica Silica 104104 104B104B662727 15 15 2.0 2.0 3D3D
Sand
Sand (Resin (Resin Coated) Coated) Ziron Ziron 115115 115A115A1001002727 15 15 2.3 2.3 3D3D
Sawdust,
Sawdust, Dry Dry 10-1310-13 12B12B6645UX45UX 30A 30A 0.7 0.7 1A-B-C1A-B-C
Sea-Coal 65
Sea-Coal 65 65B65B663636 30B 30B 1.0 1.0 2D2D
Sesame
Sesame Seed Seed 27-4127-41 34B34B662626 30B 30B 0.6 0.6 2D2D
Shale,
Shale, Crushed Crushed 85-9085-90 88C½3688C½36 30B 30B 2.0 2.0 2D2D Shellac, Powdered or Granulated
Shellac, Powdered or Granulated 31 31 31B31B6635P35P 30A 30A 0.6 0.6 1B1B
Silicon Dioxide (See Quartz) Silicon Dioxide (See Quartz) Silica,
Silica, Flour Flour 8080 80A80A40404646 30B 30B 1.5 1.5 2D2D
Silica,
Silica, Gel Gel 4545 45D45D3337HKQU37HKQU 15 15 2.0 2.0 3D3D
Slag,
Slag, Blast Blast Furnace Furnace 130-180130-180 155D155D3337Y37Y 15 15 2.4 2.4 3D3D
Slag,
Slag, Furnace, Furnace, Granular-Dry Granular-Dry 60-6560-65 63C½3763C½37 15 15 2.2 2.2 3D3D Slate, Crushed
-Slate, Crushed - ½½ 80-9080-90 85C½3685C½36 30B 30B 2.0 2.0 2D2D Slate, Ground –
Slate, Ground – 11 / / 88 82-8582-85 84B84B663636 30B 30B 1.6 1.6 2D2D
Sludge,
Sludge, Sewage, Sewage, Dried Dried 40-5040-50 45E47TW45E47TW 30B 30B 0.8 0.8 3D3D Soap,
Soap, Beads Beads or or Granules Granules 15-3515-35 25B25B6635Q35Q 30A 30A 0.6 0.6 2D2D
Soap,
Soap, Chips Chips 15-2515-25 20C½35Q20C½35Q 30A 30A 0.6 0.6 1A-B-C1A-B-C Soap,
Soap, Detergent Detergent 15-5015-50 33B33B6635FQ35FQ 30A 30A 0.8 0.8 1A-B-C1A-B-C
Soap,
Soap, Flakes Flakes 5-155-15 10B10B6635QXY35QXY 30A 30A 0.6 0.6 1A-B-C1A-B-C
Soap,
Soap, Powder Powder 20-2520-25 23B23B6625X25X 30A 30A 0.9 0.9 1A-B-C1A-B-C
Soapstone,
Soapstone, Talc, Talc, fine fine 40-5040-50 45A45A20020045XY45XY 30B 30B 2.0 2.0 1A-B-C1A-B-C
Soda
Soda Ash, Ash, Heavy Heavy 55-6555-65 60B60B663636 30B 30B 1.0 1.0 2D2D
Soda
Soda Ash, Ash, Light Light 20-3520-35 28A28A404036Y36Y 30B 30B 0.8 0.8 2D2D
Sodium
Sodium Aluminate, Aluminate, Ground Ground 7272 72B72B663636 30B 30B 1.0 1.0 2D2D
Sodium Aluminate Fluoride (See Cryolite) Sodium Aluminate Fluoride (See Cryolite) Sodium
Sodium Aluminum Aluminum Sulphate Sulphate 7575 75A75A1001003636 30B 30B 1.0 1.0 2D2D
Sodium Bentonite(See Bentonite) Sodium Bentonite(See Bentonite)
Sodium Bicarbonate (See Baking Soda) Sodium Bicarbonate (See Baking Soda) Page 12
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series
Sodium Chloride ( See Salt) Sodium Chloride ( See Salt)
Sodium Carbonate (See Soda Ash) Sodium Carbonate (See Soda Ash) Sodium Hydrate (See Caustic Soda) Sodium Hydrate (See Caustic Soda) Sodium Hydroxide (See Caustic Soda) Sodium Hydroxide (See Caustic Soda) Sodium Borate (See Borax)
Sodium Borate (See Borax) Sodium
Sodium Nitrate Nitrate 70-8070-80 75D75D3325NS25NS 30A 30A 1.2 1.2 2A-B2A-B
Sodium
Sodium Phosphate Phosphate 50-6050-60 55A3555A35 30B30B 0.9/2.00.9/2.0 1A-B1A-B Sodium Sulfate (See Salt Cake)
Sodium Sulfate (See Salt Cake) Sodium
Sodium Sulfite Sulfite 9696 96B96B6646X46X 30B 30B 1.5 1.5 2D2D
Sorghum, Seed (See Kafir or Milo) Sorghum, Seed (See Kafir or Milo) Soybean
Soybean Cake Cake 40-4340-43 42D42D3335W35W 30A 30A 1.0 1.0 2A-1B-1C2A-1B-1C
Soybean,
Soybean, Cracked Cracked 30-4030-40 35C½36NW35C½36NW 30B30B 0.50.5 2D2D Soybean,
Soybean, Flake, Flake, Raw Raw 18-2518-25 22C½35Y22C½35Y 30A 30A 0.8 0.8 1A-B-C1A-B-C Soybean,
Soybean, Flour Flour 27-3027-30 29A29A404035MN35MN 30A 30A 0.8 0.8 1A-B-C1A-B-C
Soybean,
Soybean, Meal Meal – – Cold Cold 4040 40B40B663535 30A 30A 0.5 0.5 1A-B-C1A-B-C
Soybean,
Soybean, Meal Meal – – Hot Hot 4040 40B40B6635T35T 30A 30A 0.5 0.5 1A-B-C1A-B-C
Soybean,
Soybean, Whole Whole 45-5045-50 48C½26NW48C½26NW 15 15 1.0 1.0 3D3D
Starch 25-50
Starch 25-50 38A38A404015M15M 45 45 1.0 1.0 1A-B-C1A-B-C
Steel Turnings, Crushed
Steel Turnings, Crushed 100-150 100-150 125D125D3346WY46WY 15 15 3.0 3.0 3D3D
Sugar Beet, Pulp – Dry
Sugar Beet, Pulp – Dry 12-15 12-15 14C½2614C½26 30B 30B 0.9 0.9 2D2D Sugar
Sugar Beet, Beet, Pulp Pulp – – Wet Wet 25-4525-45 35C½35X35C½35X 30B 30B 1.2 1.2 1A-B-C1A-B-C Sugar,
Sugar, Refined, Refined, Granulated Granulated – – Dry Dry 50-5550-55 53B53B6635PU35PU 30A 30A 1.2 1.2 1B1B
Sugar,
Sugar, Refined, Refined, Granulated Granulated – – Wet Wet 55-6555-65 60C½35X60C½35X 30A 30A 2.0 2.0 1B1B Sugar,
Sugar, Powdered Powdered 50-6050-60 55A55A10010035PX35PX 30A 30A 0.8 0.8 1B1B
Sugar,
Sugar, Raw Raw 55-6555-65 60B60B6635PX35PX 30A 30A 2.0 2.0 1B1B
Sulphur, Crushed –
Sulphur, Crushed – ½½ 50-6050-60 55C½35N55C½35N 30A 30A 0.8 0.8 1A-B1A-B Sulphur,
Sulphur, Lumpy Lumpy – – 3” 3” 80-8580-85 83D83D3335N35N 30A 30A 0.8 0.8 2A-B2A-B
Sulphur,
Sulphur, Powdered Powdered 50-6050-60 55A55A404035MN35MN 30A 30A 0.8 0.8 1A-B1A-B
Sunflower
Sunflower Seed Seed 19-3819-38 29C½1529C½15 30 30 0.5 0.5 1A-B-C1A-B-C Talcum –
Talcum – ½½ 80-9080-90 85C½3685C½36 30B 30B 0.9 0.9 2D2D
Talcum
Talcum Powder Powder 50-6050-60 55A55A20020036M36M 30B 30B 0.9 0.9 2D2D
Tanbark,
Tanbark, Ground Ground 5555 55B55B664545 30A 30A 0.6 0.6 1A-B-C1A-B-C
Timothy
Timothy Seed Seed 3636 36B36B6635NY35NY 30A 30A 0.6 0.6 1A-B-C1A-B-C
Titanium Dioxide (See Ilmenite Ore) Titanium Dioxide (See Ilmenite Ore) Tobacco,
Tobacco, Scraps Scraps 15-2515-25 20D20D3345Y45Y 30A 30A 0.8 0.8 2A-B2A-B
Tobacco
Tobacco Snuff Snuff 3030 30B30B6645MQ45MQ 30B 30B 0.9 0.9 1A-B-C1A-B-C
Tricalcium
Tricalcium Phosphate Phosphate 40-5040-50 45A45A40404545 30A 30A 1.6 1.6 1A-B1A-B
Triple
Triple Super Super Phosphate Phosphate 50-5550-55 53B53B6636RS36RS 30B 30B 2.0 2.0 3D3D
Trisodium
Trisodium Phosphate, Phosphate, Granular Granular 6060 60B60B663636 30B30B 1.71.7 2D2D
Trisodium
Trisodium Phosphate, Phosphate, Pulverized Pulverized 5050 50A50A40403636 30B 30B 1.6 1.6 2D2D
Page 13 Page 13
Material Characteristics Material Characteristics Material Material Weight Weight Lbs per Lbs per Cu. Ft. Cu. Ft. Material Material Code Code % % Trough Trough Loading Loading Mat’l Mat’l Factor Factor FM FM Comp. Comp. Series Series Tung
Tung Nut Nut Meats, Meats, Crushed Crushed 2828 28D28D3325W25W 30A 30A 0.8 0.8 2A-B2A-B
Tung
Tung Nuts Nuts 25-3025-30 28D28D331515 30A 30A 0.7 0.7 2A-B2A-B
Urea
Urea Prills, Prills, Coated Coated 43-4643-46 45B45B662525 45 45 1.2 1.2 1A-B-C1A-B-C
Vermiculite,
Vermiculite, Expanded Expanded 1616 16C16C½35Y½35Y 30B 30B 0.5 0.5 1A-B1A-B Vermiculite,
Vermiculite, Ore Ore 8080 80D80D333636 30B 30B 1.0 1.0 2D2D
Vetch 48
Vetch 48 48B48B6616N16N 30B 30B 0.4 0.4 1A-B-C1A-B-C
Walnut
Walnut Shells, Shells, Crushed Crushed 35-4535-45 40B40B663636 15 15 1.0 1.0 2D2D
Wheat 45-48
Wheat 45-48 47C47C½25N½25N 45 45 0.4 0.4 1A-B-C1A-B-C
Wheat,
Wheat, Cracked Cracked 40-4540-45 43B43B6625N25N 30A 30A 0.4 0.4 1A-B-C1A-B-C
Wheat,
Wheat, Germ Germ 18-2818-28 23B23B6625N25N 30A 30A 0.4 0.4 1A-B-C1A-B-C
White
White Lead, Lead, Dry Dry 75-10075-100 88A88A404036MR36MR 30B 30B 1.0 1.0 2D2D
Wood
Wood Chips, Chips, Screened Screened 10-3010-30 20D20D3345VY45VY 30A 30A 0.6 0.6 2A-B2A-B
Wood
Wood Flour Flour 16-3616-36 25B25B6635N35N 30A 30A 0.4 0.4 1A-B1A-B
Wood
Wood Shavings Shavings 8-168-16 12E45VY12E45VY 30B 30B 1.5 1.5 2A-B2A-B Zinc
Zinc Concentrate Concentrate Residue Residue 75-8075-80 78B78B663737 15 15 1.0 1.0 3D3D
Zinc
Zinc Oxide, Oxide, Heavy Heavy 30-3530-35 33A33A10010045X45X 30A 30A 1.0 1.0 1A-B1A-B
Zinc
Zinc Oxide, Oxide, Light Light 10-1510-15 13A13A10010045XY45XY 30A 30A 1.0 1.0 1A-B1A-B
Page 14 Page 14
Screw Conveyors – Capacity Table
Screw Conveyors – Capacity Table
Capacity in Cu. Ft. Per Hr.* Capacity in Cu. Ft. Per Hr.* Trough Trough Loading Loading Screw Screw Dia. Dia. Pipe Size Pipe Size (Nom. Dia.) (Nom. Dia.) Used for Used for Capacity Tables Capacity Tables Maximum Maximum RPM RPM AtAt Maximum RPM Maximum RPM At At 1 RPM 1 RPM
45%
45%
6 6 9 9 12 12 14 14 16 16 18 18 20 20 24 24 30 30 2 2 2 ½ 2 ½ 3 3 3 ½ 3 ½ 3 ½ 3 ½ 4 4 4 4 4 4 4 4 165 165 155 155 145 145 140 140 130 130 120 120 110 110 100 100 90 90 368 368 1240 1240 2813 2813 4330 4330 6126 6126 8052 8052 10253 10253 16368 16368 29150 29150 2.23 2.23 8.00 8.00 19.40 19.40 30.93 30.93 47.12 47.12 67.10 67.10 93.21 93.21 163.68 163.68 323.89 323.8930%
30%
AA 6 6 9 9 12 12 14 14 16 16 18 18 20 20 24 24 30 30 2 2 2 ½ 2 ½ 3 3 3 ½ 3 ½ 3 ½ 3 ½ 4 4 4 4 4 4 4 4 120 120 100 100 90 90 85 85 80 80 75 75 70 70 65 65 60 60 180 180 536 536 1164 1164 1753 1753 2514 2514 3355 3355 4350 4350 7093 7093 12955 12955 1.50 1.50 5.36 5.36 12.93 12.93 20.62 20.62 31.42 31.42 44.73 44.73 62.14 62.14 109.12 109.12 215.92 215.9230%
30%
BB 6 6 9 9 12 12 14 14 16 16 18 18 20 20 24 24 30 30 2 2 2 ½ 2 ½ 3 3 3 ½ 3 ½ 3 ½ 3 ½ 4 4 4 4 4 4 4 4 60 60 55 55 50 50 50 50 45 45 45 45 40 40 40 40 35 35 90 90 295 295 647 647 1031 1031 1414 1414 2013 2013 2486 2486 4365 4365 7557 7557 1.50 1.50 5.36 5.36 12.93 12.93 20.62 20.62 31.42 31.42 44.73 44.73 62.14 62.14 109.12 109.12 215.92 215.9215%
15%
6 6 9 9 12 12 14 14 16 16 18 18 20 20 24 24 30 30 2 2 2 ½ 2 ½ 3 3 3 ½ 3 ½ 3 ½ 3 ½ 4 4 4 4 4 4 4 4 60 60 55 55 50 50 50 50 45 45 45 45 40 40 40 40 35 35 45 45 147 147 323 323 516 516 707 707 1006 1006 1242 1242 2182 2182 3779 3779 .75 .75 2.68 2.68 6.46 6.46 10.31 10.31 15.70 15.70 22.36 22.36 31.06 31.06 54.56 54.56 107.96 107.96**Capacities shown are for full pitch screws. Consult factory for inclined conveyors.Capacities shown are for full pitch screws. Consult factory for inclined conveyors. Dimensions are in inches.
Dimensions are in inches. See
See Page 18 for Lump Size LimitationsPage 18 for Lump Size Limitations
Page 15 Page 15
