DPF General Spec

(1)

Product Specification

Product Name

F1020N-PNB

Regulatory Name

(2)

REVISION LIST

Revision

Date

Cause

Revised by

Rev. 0.0 09/02/16 Release preliminary spec S.I. HAN

Rev. 0.1 09/02/27 Correction by Qisda. And updated some item. S.I. HAN

Rev. 0.2 09/04/18 Some item is updated that is compared with ring design. S.I. HAN Rev. 0.3 09/09/02 Remote controller spec and codec list is updated.

Stand life time spec and motion sensor spec is added.

(3)

1. Introduction

1.1 Product Description

Model Name, F1020N is LGE’s new Digital Photo Frame developed by vender will meet the product specification and Performance described herein.

With 10.4” of 4:3 LCD this Digital Photo Frame resolution is 800*600 and other specifications are F1020N has USB A, mini B type, 5 in 1(SD/MMC/xD/MS/MS-pro) slot, Audio out(H/P)-Stereo, internal memory (2GB),

 1GB memory should be tested by Qisda internal side.

new function (Mini-Monitor), new GUI, new design with front filter and W/W Regulatory, Safety and Class-B EMC is required including energy saving.

1.2 Product Summary:

Viewable image size 10.4”

Brightness, Typical 300 cd/m^2 Contrast Ratio, Typical 500 : 1 Response Time, Typical 30 ms Display Resolution 800x600

Display color 16.7M

Digital Controls with 15 Languages OSD

(English French Spanish Dutch Italian German Swedish Greek Polish Portuguese Romanian Russian Greek Korean Japanese Chinese)

1.3 Product Suffix information

Suffix description here below is just reference so Accessory Table has in detail product configuration at each suffix.

Suffix : 6-digit Description

1 Product Description A : Set / C : CKD / S : SKD

2,3 Sales Region Refer to Appendix-A

4 Display Source

5 Regulatory

6 Scaler

Appendix-A  Suffix부여기준(LC

(6)

2. Touch keys, LG Logo LED and Others

2.1. Touch keys

Touch key is 8 keys with LED as like the below and located in right side of bezel at the front view. F1020N is configured as MENU, UP (▲), DOWN (▼), LEFT, RIGHT, OK, SELECT, RETURN

- LED color is Red.

- - I-con : Same with OSD and Romote controller.

- Menu: , UP: , Down: , Left: ,

- Right: , OK: , SELECT: , RETURN:

2.1.1 LED Operation

1. If user approach any keys when LED is off, all LED should be on. 2. If user pushes any keys, touch key should be operated by UI. 3. After detaching a finger, touched LED is off and on.

- Interval (Off time) : < 1sec

4. If user doesn’t push any keys, LED will be off automatically after 10seconds.

- DC Power On : Push DC power button or Adapter plug in. - DC Power Off : Push DC power button.

(7)

- Instant On : Speed depends on the instant on time.

2.2. LG Logo LED - LED color is white.

- Operation : LED is on when orientation is landscape automatically. If user selects logo off, LED should be off. LED is off when orientation is portrait automatically although user selects logo on.

Instant Off mode  LG logo is always On.

- Lightness : Current = 27.7 mA

(8)

2.3. Remote Controller - Distance : Max. 2.5m - Code : NEC Protocal - Force : 150g

- Design : Refer to the below (World wide)

CUSTOM Code : 0x827D

- Japan (Black) - Japan (White)

- Color spec : Refer to the below.

Remote_controller _artwork_090803

(9)

2.4. Intstant On/Off (under 1 sec) - LED Backlight Off

- Must keep last status before pushing the instant key (On  Off) - Background is black.

- Instant off mode  LG logo is On though logo light of setup is off.

2.5. DC Power On/Off

2.5.1 Power On Time (under 2 sec)

- Off mode status : IR is ready for remote controller and DC power button should be operated. - Splash Image : ( It should be shown just from turning ON DPF to system ready for playing.)

booting_image.pn g

1. Power on (really power supply to DPF) 2. Load code from NAND and OS init -> 720ms 3. Wait for Power key event if necessary

4. Load logo file and show it -> 1s~2s. According to logo picture size.

- Interval : From pushing DC power button to displaying the image.

(10)

3. OSD Function

F1020N has new UI and GUI. .

Functional explanation and detail UI operation refer to attached. 3.1 OSD Configurations

DPF_UI_v1

.9_090427_Eng.pdf

Definition_V1.2Key _{Language_Table_}

V1.8_090819 3.2 OSD Factory Out Condition

The below OSD setting should be checked before shipping out as well as F/W version. On operating time, it should be kept within 2 Hours during producing.

If it exceeds 2 hours, operators should reset the operating time using the SVC key . - Power switch : OFF

- Power saving : OFF - Starting mode : Last mode - Orientation : Auto

- Photo Aspect ratio : Original - Video Aspect ratio : Original

- Language : English (Setup when power is on) - Date and Time : 1/1/2009 12:00 AM

- Brightness : Level 5 - Logo Light : On

- Motion Sensor : Off (N/A)

- Volume : 50 3.3 SVC OSD Configurations

SVC OSD is only for service engineer. SVC OSD should be included with the below item.

# Entering method : In Product information menu

=> Input key: Select, Right, Select, Left, Left, Select, Menu - Screen saver : On/Off

- Operating time for checking the life time of panel - Panel maker : AUO (N/A)

- F/W version : Same with product information (N/A) - Reset (N/A)

 Model Option : N/A

 Default value : Screen saver – On Operating time – 0 hr

(11)

4. Electrical

4.1 Main controller, Touch control IC and Memory Information.

Vender should provide main controller and flash memory information such as specification, maker name and production history.

Main controller Name: S5L2010D Maker: Samsung

Touch control IC Name : CG7153AM

Maker : Cypress

NAND Flash Memory Name : K9GAG08U0M-PCB0 / MT29F16G08CBABAWCES Maker : SAMSUNG/Micron

Size : 1G/2G Bytes

SDRAM Memory Name : HY57V281620FTP-6 TSOP

,

EM639165TS-6G Maker : HYNIX, EtronTech

Size : 16M Bytes 4.2. User Interface and Codec List

4.2.1 Card Reader

Card Type Capacity Remark

MS (Memory Stick) 128 MB Standard ver1.4

MS-Pro (Memory Stick Pro) 32 GB Pro ver1.0

SD (Secure Digital) 2 GB SD ver2.0

SDHC (Secure Digital High Capacity) 32 GB SD ver2.0

MMC (Multi Media Card) 2 GB MMC ver 4.1

xD (xD-Picture) 2 GB xD ver1.2

USB storage 8 TB FAT32 limitation

Not support external HDD

4.2.2. USB Cable

-

Type : Straight (Mini B+A) - Maker : XINYA, Honglin - Length : 900 mm

(12)

4.2.3 Codec List

Category Codec Support Remark

Photo JPEG Max: 65535*65535 Up to main

controller spec. BMP

GIF PNG JPEG Progressive

Video MPEG1 Max: 960x608

Max: 10 Mbps MPEG4(ASP) Music PCM, ADPCM,A-law PCM,Mu-ADPCM,A-law PCM PCM16bit/8bit MS-ADPCM 4bit DVI-ADPCM 4bit A-law,Mu-law PCM Channel:dual/mono FS:32/44.1/48KHz 24/22.05/16/12/11.025/8KHz Bitrate: 8-320kbps MP3(Including ID3-Tag)/MPEG Audio FS:32/44.1/48KHz 24/22.05/16/12/11.025/8KHz Bitrate: 8Kbps ~ 320Kbps, VBR/CBR ID3-tag: Alphabet/number/symbol

Code page(ASCII etc.) Channel:dual/mono 4.3 PCB 4.3.1 Main PCB Material(Layer) : Epoxy(4layer) Size : 104.5 x 94.6 mm Thickness: 1.2 mm 4.3.2 Daughter PCB

Material (Layer) : Epoxy(2 layer) Size : 93.27x 74.4 mm

Thickness : 1 mm 4.3.3 LED PCB

Thickness : 1 mm 4.3.4 Keypad PCB

Thickness : 1 mm 4.3.5 IR PCB

(13)

Thickness : 1 mm 4.4 Gold Capacitor

Qisda apply a gold capacitor for RTC.

LGE spec : RTC operates over 24 hours by gold capacitor after unplugging the adapter. It means the saved time data should be keeping continuously.

- The capacity of gold capacitor : 0.22F 4.5 Mini-monitor

4.5.1 Resolution

- landscape mode : 800x600 - Portrait mode : 600x800

4.5.2 Frame rate : 15~20 Frame/s 4.5.3 Orientation of screen

. Auto : Following feedback from DPF pivot sensor. . Manual

4.5.4 RGB to YcbCr conversion & Driver, Transmitting interface. Command Set.zip 4.5.5 PC Requirement USB_mini_monitor _PC_SW_requirements(090629).xls 4.6 Audio out 4.6.1 Speaker (Mono) - Output:0.5W - Size: 14x20x4 - Maker: Power sound 4.6.2 Head phone (Stereo)

- Output : >300mVrms ( 0dBFS, 1KHz, 32 ohm) 4.7 Motion sensor (N/A)

(14)

5. Power Characteristics

F1020N will use adapter.

The Primary rectifier CE capacitor voltage specification will be more than 450V and Fuse should be selected by the maximum inrush current no less than (I^2T) *0.1

All adapter components reability test should be conducted under maximum loaded condition confirmed by LGE. 5.1 Power requirement

5.1.1 Input Voltage / Frequency Range : 90 ~ 264 Vac / 47 ~ 63 Hz 5.1.2 Input Current : ≤0.6 at 100 Vac , ≤0.3 at 240Vac

5.1.2. Output Voltage : 9V ( ± 5% ), 2A 5.2 Type Name

EU/Chile ADS-18C-12N 09018GPG

USA/Japan ADS-18C-12N 09018GPCU

England ADS-18C-12N 09018GPB

China ADS-18C-12 09018GPCN-B

Korea ADS-18C-12N 09018GPK-B

South Africa ADS-18C-12N 09018GPI

Argentina ADS-18C-12N 09018GPA

Brazil ADS-18C-12N 09018GPBR

Israel ADS-18C-12N 09018GPx

India ADS-18C-12N 09018GPI-B

Australia ADS-18C-12N 09018GPSA

5.3 Power Consumption

5.3.1 Measurement Pattern : Maximum load condition.

Min. Typ. Max.

OFF Mode (DC Power Off) - 1 W

STANDBY Mode (Instant Off) 3W

ON Mode 8W

 Need to meet LGE QA spec of power consumption at the off-mode : under 0.8 W.

5.3.2 Energy Saving : Refer to regulation sheet.

Follow the sales region(Adapter) : USA – Energy Star V2.0, Korea Energy saving,

China Energy saving (Grade-1), Australia- MEPS (Level 5)

5.4 Power Efficiency

Adapter power factor should be more than 80% to meet Level-5 of w/w requirement.

Power consumption at No-load is less than 0.3W and efficiency an On-mode be over than 0.0626ln(Pno)+0.622 For all 0, 25, 50, 75, 100% load condition and both 115Vac and 230Vac.

(15)

6.1 Optical Specification

Test conditions are after 30minutes operation with panel nature resolution and Brightness set to 100%. 6.1.1 General Scope

Para meter Specification

Maker AUO

Type TFT Color LCD Module

Active Display Area 10.4 inches diagonal

Pixel Pitch [mm] 0.264(H)×0.264(V)

Electrical Interface TTL

Color Depth 16.7 M

Size [mm] 228.4(H)×175.4(V)×6.2(T) mm

Surface Treatment Anti-Glare

Operating Mode Normally White ( TN )

Back light Unit LED

R/T ( ms ) Typical Rise Time: 12 Fall Time: 18

Max. Rise Time 20 Fall Time 30

6.1.2Optical Characteristic

No Item Criteria Remark

1 Viewing Angle <CR≥10>

Horizontal(Right/Left) : +75º/-75º (Typ.) Vertical(Top/Bottom) : +50º/-60º (Typ.) 2 Luminance Average Luminance (cd/m2₎ _300(Typ.)

(Full white pattern)

Luminance Uniformity 75% (min.) Remark 1

3 Contrast Ratio 500(Typ.)

4 CIE Color Coordinates Min. Typ. Max.

White Wx 0.260 0.310 0.360 6500K

Wy 0.280 0.330 0.380

(16)

Visual Defects (See Notes) Follow the IIS spec.

Scratch, Dark/White Spot, Dent Fiber, Lint, Foreign material, Polarizer Bubble, total defects Electrical Defects (See Notes)

Bright Dot (Electrical) N≤2 N> allowed number Dark Dot (Electrical) N≤5 N> allowed number Total number of defective dots N≤5 N> allowed number Minimum Distance Between Electrical Defects

Two adjacent Bright Dots N≤1 N> allowed number Two adjacent Dark Dots N≤2 S< allowed distance Distance between defect Bright Dots S≥15 mm S< allowed distance Distance between defect dork Dots S≥15 mm S< allowed distance

Three or More Adjacent dot Not allowed

Line defect(V-Line/H-line/ Cross line) Not Allowed China ( TBD )

Electrical Defects (See Notes) Count Reject

Bright Dot (Electrical) N≤0 N> allowed number Dark Dot (Electrical) N≤3 N> allowed number

Total number of defective dots N≤3 Reject

Minimum Distance Between Electrical Defects

Two adjacent Bright Dots N = 0 N> allowed number Two adjacent Dark Dots N≤1 S< allowed distance Distance between defect Bright Dots Not allowed S<allowed distance

Distance between defect dork Dots S≥10 mm S<allowed distance

Three or More Adjacent dot Not allowed

Line defect(V-Line/H-line/ Cross line) Not Allowed Notes Remark 1: including distance between dark and bright dot.

1. All criteria shall be L<W

2. D= Diameter = (L+W)/2, Unit: mm L= Length, Unit: mm ,

N= Number or Count

S= Separation from Edge to Edge , Unit: mm W= Width, Unit: mm

Spot = Contamination

Dot = Sub-pixel stuck on/off (electrical)

6.3 Image Sticking

Image sticking should be disappeared within two hours under 128-grey background pattern after displaying for 72 hours at chess pattern shown as below

.

(17)

Test Condition ;

Brightness control 100% setting

Screen Pattern is chess pattern at nature resolution.

Chess Pattern

 Screen Saver is required.

- Operation : Adjust the brightness by the hardware post process Fade out and in effect (Black to white) - Operating Condition : over 24 hr with the below status

Case 1. Duration setting value is 24hours (Play List has only one photo) Case 2. Pause on the slide show.

Case 3. Main Menu. Case 4. Each Browser. Case 5. Setup Menu.

Case 6. Clock/Calendar is enabled. (Without photo)

(18)

The calculation method is described in below table and each test criteria is at LGE Test Standard. 7.7.1 Accumulated MTBF

Item PV PQ

Life Test 11,450 10,180

Accelerated Life Test 78,930 52,620

Early Life Test 26,310

Migration Test 2,630 5,260

Accumulated MTBF[hrs] 93,010 94,370

Digital Photo Frame should be tested by LGE test standard. Refer to “LGE test standard V7.5”. 7.2 Components De-rating Requirement

All components must satisfy LGE de-rating requirement and vender test report including raw data will be reported before PV building and report to be revised whether components are changed.

Basic requirements are 1. No Tantalum capacitor

2. Primary Rectifier CE capacitor voltage spec is 450V or over. 3. CAPXON, G-RUXON, SAMXON CE capacitors are not allowed.

Item Voltage (Peak)

Power Current Temperature (@ Amb.=40℃

)

Remark Peak RMS Average

Resistor Dip 70% 50% N/A 100℃ 　

Chip 100℃,

Note-1

Floating 140℃ 　

Capacitor Electrolytic 90% - 　 70%

Note-2 　 Rate-15℃*Note-3 Life time > 20,000 hrs

Poly-film 80% - 80% 80% - Rate-10℃* 　 Ceramic 80% - 80% - - Rate-10℃* 　 Chip - - - 100℃, Note-1 　 DIODE Dip/Chip 80% 80%* 80% - 70% 100℃

Note-6 * Zener Diode Only

Floating -Voltage Abnormal 90%

TR/FET Dip/Chip 80%, Note-4 80% 80% 80% 70% IC DIP/chip 80% 80% 80% - - 　 Transformer Class A - - - 90℃ 　 Class B - - - 110℃ 　 PCB Phenol - - - Soldering Point Spec : 105℃ --> <90℃ Spec : 130℃ --> <100℃ 　 CEM-1 - - - 　 Epoxy - - - 　 Fuse 　 100% - I2xT * 10% Note-575% -　　 Bead/Coil Chip 　　 - 80% - 100℃, Note-1 　 Crystal 　　　 90% 　

Module Front (Glass) 　　　 48℃, Note-7

(19)

Body size < 2012 --> less than 100℃ < 3216 --> less than 85℃

3216 type R,C cannot be mounted upper side of PCB.

Note-2 Permissiable Ripple Spec = I ripple spec x Ff x Ft Note-3 CE Capacitor Life time

Lr : Capacitor Life Spec. Tㅇ: Capacitor Temp Spec. Tx : Capacitor case Temp. ΔT : Capacitor Self Heat

ΔTo: Self Heat Coefficient (85℃ =10, 105℃ = 5) Ia : Measured Ripple Current

Is : Ripple Current spec. Ff : Frequency Factor

Note-4 Abnormal Voltage Derating. * Abnormal Condition < 90% * FET with Avalanche Diode 1. Vds ≤ 100% @ Abnormal Vds ≤ 95% @ normal

2. If Vds is more than 95%, Component maker's Guarantee letter is required about reliability and Diode built-in. Note-5 Fuse Temperature Derating

Fuse Derating considering Temperature factter >= Irms / (0.75 * Tdf) Note-6

If semiconductor component body temperature is over than 100℃, junction temperature margin re-calculation can be acceoted with thermal resistance and it should be less than 80%.

Note-7 Panel Front Temperature at 25(room temperature) Test point is 30mm apart from bezel-end and any-point. 7.3 Reliability test

On the basis of LGE reliability test standard, LGE will do during development period. Supplier provides test samples both PV and PQ.

Alos, Supplier’s Reliability Test Report should be submitted prior than Phase Ext. Detail LGE Reliability Test Standard Ver7.5 is attached as Appendix-B.

(20)

Storage -20 to 60 °C Humidity : Operating 10~80 % Storage 0~ 90 %

Operational Altitude 0 – 5,000m (0 – 16,400 Ft) 7.5 Stand life time requirement

- Left/Right : Min. 750 times

8. Quality Management System

The attached document is LGE Outsourcing QMS standard.

Supploier should follow this process from development and EOL.

LGE OS QMS_20090415

9. Agency / Regulatory Requirement

(21)

W/W regulatory names are below and regulatory requirement is Appendix-C

Appendix-c  LGE_Regulations_ 25th May 2009_LGE.xls

9.2 Safety check

9.2.1 Electric Strength Test : 1) Test Voltage

Basic insulation (L + N - Ground) : 1500V AC or 2121V DC Reinforced insulation (L + N - SELV) : 3000V AC or 4242V DC 9.2.2 Leakage Current: 3.5mA Max

1) Test condition: No signal (Self Raster), Power Switch off 2) Bri. / Con. : Max

9.2.3 Hi – pot test and ground continuous test: 100% test in line

1) According to IEC60950, the adapter used by us is class II. The class II product does not connect to earth. So, it can not test Earth continuity.

2) All units will be 100% Hi-Pot tested by our vender before deliver to Qisda. 3) Hi-Pot test condition by our vender as below:

Test Voltage: AC3750V Frequency: 50Hz Test time: 3 seconds.

9.2.4 Check Safety components: applied safety regulation (Nemko/ cUL/ TUV-GS etc) 9.3 EMC Requirement

9.3.1 EMI ( radiated / conducted ):

Development : more than 5 d B margin, Tested units : 3 sets Each stage, report LGE the tested data and changed points. 1st MP : more than 3 d B margin, Tested units : 3 sets

(22)

No Description Material Color Remark 1 Front cover BF0670F (PMMA+ABS) Black color (half-transparency) Injection

2 Middle Line HF-380-92751 (ABS) Hongsi-red Injection+Painting

3 Back Cover HF-380-92751 (ABS) Black Injection

4 Instant Button HF-380-92751 (ABS) Black Injection

5 Stand HF-380-92751 (ABS) Black Injection+Printing

6 Power button HF-380-92751 (ABS) Black Injection

7 Decoration cab L-1250Y (PC) Red/Black Injection+ Vacuum

evaporation+UV coating+painting

D:\Proe_dat\

LE104F00\Document\Artwork\six_view Model (1).pdf

10.2 Dimensions and weight

Item Set Dimension (Unit : mm) Width (W) 213.7 Depth (D) 271.9 Height (H) 75 Net weight (Kg) 6.84 Gross weight(Kg) 8.04

10.3General Technical data 10.3.1 Cosmetic Limit

(23)

1 Color delta E≤ 2.0 max Based on standard specimen

delta E ≤ 1.0 max Compare with front and rear cover

2 Sink mark,

Flow mark, Weld mark

Not allowed. Evaluation Condition

-.luminace:350+/-50lx. -.Time:5sec./surface -.View Angle:90 degree

-.Distance:700mm from Monitor

3 Others

(scratches,burns blush,surface- contamination, silver-streaks etc.)

Max. Allowable defects (Q’ty and size) Per Surface

Front, top :Size ≤0.11~0.3mm , Q’ty≤ 3 EA Side(R/L) :Size≤ 0.31~0.7mm, Q’ty≤ 4 EA Others : Size ≤0.51~1.0mm, Q’ty≤ 4 EA The distance between two defects may not be less than 100mm.

4 Flash Front, Top≤0.15mm,

Side(R/L) ≤0.2mm Others≤0.3mm

5 Box No dirt or damage

6 Texture MT-11020, MT-11015, MT-11010,

High Glossy

This standard applies to all molded parts and surface finishes unless otherwise specified on the part drawing.

10.3.2 Alignment Limit

No Contents Maximum Allowable Limit Remark

1 LCD/Bezel gap ≤1.0 mm Total gap

Bezel lines must keep parallel to Panel

2 F/Cover & B/Cover gap

≤1.0 mm With cosmetic gap

3 Mismatch Bucket to Bezel Gap≤+ 0 /- 0.5mm Bucket to Bezel Deflection ≤+/- 1.0mm

With cosmetic step

(Back cover cannot be bigger than front cover)

10.3.3 Cosmetic Template

The attached Cosmetic Template is used for judgement.

LGEcosmetic_te mplate(REV.00).pdf

10.4 Screen Alignment Quality Requirement 10.4.1 Centering

(24)

D 10.4.2 Tilt A B Active area(LCD) | A−B | ≤ 1.0 mm E G | C−D | ≤ 1.0 mm Bezel | E−F | ≤ 1.0 mm F H | G−H | ≤ 1.0 mm C D 10.5 Packaging

(25)

Supplier should submit packaging specification

10.5.2 Container Packing Quantity

Container Size Stuffing Qty (Palletizing) Individual

20 feet 1200 N/A

40 feet 2480 N/A

10.5.3 Package Dimensions and weight Item Box Outer size of Box Width 360

( Unit : mm ) Depth 329

Height 124

Gross weight (Kg) 8.04

11. Compatibility / Usability/Optical characteristic

10.1. Compatibility Test

Supplier should provide the memory card list to be tested and LGE will do at PV and PQ qualification period. All problems found by LGE will be closed in time.

11.2 Usability

a. Measurement and check in product specification all items. All system bug or wrong opration are not allowed. 11.3. Optical characteristic

a. Dark Room b. Measurement Items

- Gray scale/Luminance /Contrast ratio/Viewing angle/Cross talk - Response time/flicker/chromatic (white, green, red, blue)

(26)

12. Cosmetic

12.1 Identification label (Detail contents refer to ID label drawing) Product Name : F1020N-PNB

Product Code : F1020N-PNB.AxxVNB MODEL NO.(Regulatory name) : F1020N POWER : DC 9V, 2.0A

SERIAL NO. : YMMRRCCSSSSS (Must printed in ID label directly)  see note-1 Material : PET 50g

Text Color : PANTONE Cool Gray 4, Background  Black, Overprinting color  Black

Note-1. Serial number configuration Y M M R R C C S S S S S 1 2 3 4 5

1) Y : YEAR(Last digit of Year 2005->5, 2006->6 ,… 2) MM : MONTH(01 ~12)

3) RR: SITE CODE FOR EACH PRODUCTION FACTORY

Manufacturing Plant Site Code

LGE Gumi Plant KG

QISDA QC

4)CC : CODE is self-produced by coding program

5)SSSSS : SERIAL NO. 34 Sequential Count(2digits) + Decimals(3digit) SS : 34 Sequential Count

- Use 0 ~9, A ~Z / Not use alphabet I, O SSS : Decimals (Assign 001 ~999)

The serial number should be applied sequentially regardless of the model, suffix and product(Monitor & LCD TV etc.) If the manufactured month is changed it should be restarted from 00001 to ZZ999.

NOTE) Serial NO. Assign Method Per each month, restart

00001~09999, 0a000~0A999, 0B000~0B999 ~~~~0Z999, 10000~19999, 1A000~1A999,1B000~1B999~~~~~1Z999, 20000~29999, 2A000~9Z999,

(27)

ID LABEL _BLACK(090612)- 1

12.2 Barcode label : Gift Box/Box [JAN Code] Production Model :F1020N-PNB GSCP Model : F1020N-PN JAN : 49-89027-001015 [EAN Code] Production Model :F1020N-PNB GSCP Model : F1020N-PN EAN : 8808992664079 [UPC Code] Production Model :F1020N-PNB GSCP Model : F1020N-PN UPC : 719192185883

(28)

12.3 User Manual 12.3.1 Contents

(29)

Contents Description User’s

Guide

•

_PrecautionsImportant

•

_{/ On repackaging / On Disposal}On safety / On Installation / On Cleaning

•

Composition of

product

•

Accessories

•

Name of parts

•

Remote control button names and functions

•

Remote controller sensor

•

Replacing the remote control battery

•

Installation and

connection of product

• _•

Installing type_{Connecting power cord}

•

Connecting USB / Connecting Memory card

•

Before beginning

•

Setting

•

Key-help

•

Home menu

•

Screen Composition and buttons

•

Slide show

•

Playing Photo and Slide show menu

•

Music

•

Playing Music

•

Playing screen composition and buttons

•

Video

•

Playing Music

•

Playing screen composition and buttons

•

File management

•

Screen composition and buttons

•

File management menu

•

File copy/delete

•

Selecting all files/Unselecting all files - Slide show/Select all/Unselect all/Copy /Delete/Rotate/Sort by/Device selection

•

Setup

•

Brightness / Orientation / Photo Aspect Ratio

/ Video Aspect Ratio / Alarm / Music Auto Play / Power saving / Starting mode / Language

/ Date and time / Motion sensor / Power on message / Internal Format / Reset / Product information

•

Motion sensor function

•

Power on message function

•

Troubleshooting

•

Specifications

•

Size

•

Dimension

•

Weight.

•

Resolution

•

Power input

•

Power consumption

•

USB

•

Internal memory

•

Supported file format

•

Supported Memory Cards

•

AC-DC Adapter

•

Service Information DPF

Manager

•

_install DPF Manager & User’s Guide

•

How to install DPF Manager

•

Connecting to PC

(30)

12.4 CD-ROM CD face size : 117mm

A knockout fig is required between 32mm and 35mm diameter. This area is not printable Printing Colors

- Background color : Black

- Text color : Silver (Natural Color) Printing Method : Off-set

(31)

CD CD-ROM Contents - User’s Guide

- DPF Manager - Reference

Language : 19 Languages

; Dutch English French German Greek Indonesian Italian Japanese Korean Polish Portuguese Romanian Russian Spanish Swedish Turkish Simplified Chinese Hebrew Arabic