HOW TO USE ADT SECURITY SERVICES, INC.’S SUBCONTRACTORS:
ADT is often called upon for turn key Security Systems & Solutions. This may include additional work that is outside of
ADT’s expertise but integral to the overall solution. Examples of this include but are not limited to the following:
•
Providing a Split Air Conditioning system to keep equipment running at
proper operating temperature.
•
Moving non structural walls or doors to allow an area for equipment and the customer’s surveillance
operator to reside or to install a portal door or sally port.
•
Hiring a locksmith to install door strikes for the card access system.
•
Providing concrete pads for mounting camera poles.
•
Provide proper lighting for Cameras to operate.
•
Hiring a fence contractor to repair a damaged fence so that equipment can be installed properly.
•
Hiring a fiber contractor to reduce the amount of cable that needs to be ran throughout the building.
•
Engage Manufacturer technicians to provide a higher level of maintenance required for specific installed equipment.
•
Trenching to run cable from building to building may include repairing pavement or concrete.
•
Hiring a tree contractor to trim or remove trees to allow for optimum required camera views.
•
Running of conduit and power for cabling and devices in the structure.
Under the aforementioned circumstances, ADT is permitted under Group PT63073 to undertake the following
procedures to ensure both a competitive procurement, lowest cost, and the best services for authorized users
to complete a turn key security system:
Whenever a sub contractor is used ADT solicits three bids for all jobs anticipated to be over $15,000 in cost.
ADT’s list of sub contractors will include their years in business, basic description of work provided and the
regions that they conduct their work. As with the past contract and consistent with all other contracts that
ADT has with NYS the fee for these services will be cost plus 25%. This includes direct expenses to develop
and manage project/contractor milestones, progress billing and field verification of labor quality. It also
includes the following;:
1. ADT takes full ownership of the project from cradle to grave insuring that the end user gets the best
integration possible. This also allows the NYS customer a single point of contact instead of being tasked with
managing multiple trades at one time.
2. ADT works with the NYS customer and usually their consultant to review all the Plans and Specifications.
3. ADT will work with the Engineers and Consultants to clarify any issues with the Plans and Specifications.
4. ADT will then bid the project to three reputable contractors. This usually includes a pre bid meeting and a
walkthrough of the facility.
5. ADT then reviews all Contractor bids and will oversee the selection of a qualified and competent contractor.
6. ADT will arrange and attend a kick off meeting with their contractor and the facility.
7. ADT will oversee that all the specific standards and requirements of the State Customer are followed.
8. ADT will oversee ALL aspects of the project.
9. ADT will work to ensure at project completion that the contractors punch list is not dragged out, that the
facility can assume normal operations without the on going, never ending punch list work.
SERVICE
In the event that a NYS Customer does not have a full maintenance plan in effect and requires Time and Material Service the
following rates shall apply.
1. All LABOR shall be charged as per the Regional rates posted on the current contract.
2. All REPLACEMENT of "ON CONTRACT PARTS" shall be charged as per the current NYS Contract posted
rate.
necessary to return such piece of equipment to the manufacturer for evaluation. If the manufacturer can repair the piece
of equipment or any component of such equipment an estimate will be provided to ADT by the Manufacturer. ADT will
then determine the cost of the repair, which is not to exceed 50% of the replacement cost. If the repair cost exceeds 50%
of the replacement cost, ADT will recommend replacement. If the piece of equipment or any component can be repaired
by the manufacturer for less than 50% of the replacement value, ADT shall authorize such repair via a Purchase Order to
the Manufacturer. The final repair cost will be the net cost of the repair, which includes all shipping and handling
charges, plus an additional fee of 25% of the manufacturers repair cost. Any field repair charges incurred will be billed at
the hourly labor rates posted on our current contract. Upon request, ADT will furnish the Purchase Order provided to the
manufacturer as verification of the repair charge.
4. In the event that ADT chooses to use manufacturer’s representative, field advisor, or sub contractor to perform a
service call or site visit, the cost shall be the same as our sub contractor provision which is cost plus a 25%
markup.
ADT SECURITY SERVICES, INC. LIST OF SUBCONTRACTORS:
Name of Company Scope of Work Regions
TKM
50 Carnation Avenue Building 4
Floral Park, NY 11001 Installation of Fiber, security, fire alarm, voice/data 1, 2, 3, 4 KND Licensed Electrical (WBE)
50C Brook Avenue Dear Park, NY 11729
All phases of Electrical Contracting. We provide services for Building Maintenance systems, fire alarm, security, audio visuals, video
conferencing, sound equipment, lighting, and power. 1, 2
Aim Security Locksmith Inc.
Locksmith service, includes rapair, installation and service of mechanical locking devices and related hardware, low voltage locking devices, such as electric door strikes, magnetic locks, and electrically
controlled hardware, such as panic devices and locksets. 1, 2, 3, 4
Custom Computer Specialists Inc. 70 Suffolk Court
Hauppauge, NY 11788
Large scale IT projects. Custom delivers a wide array of technology services including: project management, onsite staffing, network design, installation and support (LAN/WAN, wireless solutions, IP Telephony, IP video surveillance, network storage and security solutions, etc.), data center services, managed services, warranty repair services, professional development and a complete suite of procurement, warehousing, just-in-time delivery and installation
services. 1, 2, 3, 4
X-United Security Alarm, Inc. Electronic Fire and Security Protection 1 & 3 Life Safety Consulting Corp. Fire Alarm System Engineering 1, 3, 4, 5, 6, 7, 8, 9 American Lock & Alarm
Corporation
2300 Hempstead Turnpike
East Meadow, NY 11554 All aspects of Locksmithing and Electronic Security, including Lock and Door installation and repairs 1 & 2
Cooper Power & Lighting Corp.
Electrical Contractor, all phases of electrical construction including Complete Power & Lighting, Fire Alarm, Low Voltage, Security
Secure Rite Inc Installation of all phases of Burglar & Fire Alarms, CCTV and Access Control. 1 Contemporary Computer Services,
Inc. (CCSI) (SBE) 200 Knickerbocker Road Bohemia, NY 11716
Professional Integration Services – IT Support Services, Maintenance Support Services, Silver Cisco Service Provider, Gold Microsoft Service Provider – Experts in Wireless, IPT, Infrastructure, Security and
Storage 1, 2, 3, 4
Manning, Squire, Henning General contractor to include concrete, masonry, minor site work, and select demo. 7, 8, 9
V.WEIS construction General contractor 7, 8, 9
Kogut Electric PO BOX 1735
Utica, NY 13503-1735 Installation of systems for power distribution, lighting, fire alarm, security, CATV, sound, and nurse call. 5, 6, 7, 8, 9 S&L Electric (SBE)
5313 State Highway 56
Colton, NY 13625 Electrical contracting 6, 7
TEC System
Electrical construction, service, and maintenance in the industrial, commercial, institutional, and residential industries. Cooper and
fiber optic cabling for voice, data, audio, video, and security systems. 7, 8, 9 Skelly Contractors
PO Box 541
Ogdensburg, NY 13660 Plumbing, HVAC, sprinkler, electrical, and sheet metal 6, 7 Billitier Electric
737 Atlantic Avenue Rochester, NY 14609
Electrical contracting services for commercial and industrial projects. Tel/data, security, fire alarm, fiber optic installations and splicing,
electrical maintenance, high voltage, and system design 7, 8, 9 A Village Locksmith
6929 ERIE Rd
Derby, NY 14047 Locks and safes sales and service 7, 8, 9 Al-Bright Electric electrical contractor for residential, commercial, government, and industrial. 1, 2, 3, 4 Folkes Heating & Cooling
850 Rte 9
Fishkill, NY 12524 HVAC 3
Tymetal Corp. PO Box 139
Schuylerville, NY 12871-0139 Aluminum gate manufacturer and installation Statewide George J. Martin & Sons, INC.
(MBE) 2 Cooper Ave.
Rensselaer, NY 12144 Electrical work 4, 5, 6
Northeast Refrig & AC 27 Railroad Ave.
Albany, NY 12205 HVAC and refridgeration installation and service. 5, 6 Joseph P. Magione
187-189 Fourth St Troy, NY 12180
Locksmith and contract door hardware, card access/electric strike/commercial door installation, cameras, and handicap door
TriState Technology
Pre-wire for Access Control, CCTV, and burgular alarm. Turnkey installation of access control, CCTV, and burgular alarm. System
programming of access control and CCTV. Statewide
Suburban Lock and Key Service
Complete locksmith service, specializing in electronic locking hardware applications and installations. Installation of Metal doors
and frames. 7, 8, 9
Barkley Safe & Lock 16 Court Street
Canton, NY 13617-1137 Locksmith services, safe sales and service, alarm and camera installation. 7 Rommel Fence, LLC. (WBE)
PO Box 367
Poland, NY 13431 Fencing, gates, access controls, minor site work 3, 4, 5, 6, 7, 8 Connors-Haas, Inc
6337 Dean PKWY
Ontario, NY 14519 Commercial/Industrial electrical contractor 5, 6, 7, 8, 9 Heartwood Construction General Contractors: Commercial, Industrial, Institutional. New construction. Renovation. Restoration Statewide Bette & Cring
22 Century Hill Dr Ste 201
Latham, NY 12110 General Construction 5, 6, 7
Security Fence Systems 4060 Boston Rd
Bronx, NY 10475 Gates, fences, sliding gates, razor wire 1, 2, 3, 4, 5 American Secured Fence Corp.
2190 Reeds Mill LN
Bronx, NY 10475 Fence 1, 2, 3, 4
BJL Electric Corporation 65 Hemlock Lane
Bay Shore, NY 11706 Install low voltage systems, Fire alarm, CCTV, Card Access. Residential and commercial electrical installations. 1 KGK Electrical Corp
50-01 25 Ave
Woodside, NY 11377 Commercia and residential electrical contractor 2 Wade Electric Commerial and light industrial electrical contractor 2 Mackenzie Automatic Doors
72 Reade St
New York, NY 10007 Door repair and installation 1, 2, 3
Infinite Lock and Doors Locksmith and door repair 3
Murnane Building Contractors Commercial general construction 5, 6, 7, 8 The Pike Company
ONE Circle ST
Rochester, NY 14607 General Construction and construction management Statewide Collins-Hammond Electrical
P O Box 1034
Ogdensburg, NY 13669 Commercial electrical 7
O'Connell Electric 830 Phillips Road
Victor, NY 14564 electrical contractor for residential, commercial, government, and industrial. 3, 4, 5, 6, 7, 8, 9 Excel Builders and Renovators Inc. General Contractors servicing all trades Statewide
Kaplan-Schmidt Electric, Inc 50 Saginaw Drive,
Rochester, NY 14623
Electrical, Fire Alarm systems, security systems, CCTV systems, site electrical work, perimeter fence security systems, sound systems,
paging systems 4, 5, 6, 7, 8, 9
DGB Management, Inc. 145 MALI DR
North Plainview, NJ 07062 Site Surveys, Network Design, Wireless Security Statewide Stilsing Electric, Inc (WBE)
555 South Street
Rensselaer, NY 12144 Commercial electrical 5,6
Suffolk Lock & Security Professionals, Inc. 430 West Montauk Hwy
Lindenhurst, NY 11757 Door hardware, access control systems, alarm systems, CCTV systems, safes, all keys made 1
Bana Electric Corp 50 Gazza Blvd. Farmingdale, NY 11735
Low, Medium, and high voltage power systems, lighting systems, fire alarm systems, public address/interrcom systems, generators, data network cable systems, building sound systems, security systems,
electrical testing and maintenance 1, 2
Perimeter Barrier Systems, Inc. 20 Marconi Blvd.
