• No results found

Development and Verification of the Three-Dimensional Electrostatic Particle Simulation Code for the Study of Blob and Hole Propagation Dynamics

N/A
N/A
Protected

Academic year: 2020

Share "Development and Verification of the Three-Dimensional Electrostatic Particle Simulation Code for the Study of Blob and Hole Propagation Dynamics"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1 and that the strength of B is set as
Table 2Parameters of hole propagation simulations.
Fig. 5Time variations of position of the electron center of massin a hole, xnec, on the x–y plane at z = Lz/2 in the sheath-limited case
Fig. 7Relation between the poloidal hole size, δby, and the hole
+2

References

Related documents

2, when the drug response is high, we found that the top two T4 cell counts and the lowest two infected monocyte/macrophage counts occurred at the fourth level (480 days) and

More specifically the aim of this study was to investigate the associations between health, social and work-related factors, recovery, as well as biological stress markers among

We have provided access to a Remote Import Server which is local to the Exchange environment, to allow importing mail files using an FTP connection and RDP to a

This program introduces high school students to complex corporate transactions, takes them on enrichment trips to visit corporations, and hosts monthly meetings to revisit curriculum

19% serve a county. Fourteen per cent of the centers provide service for adjoining states in addition to the states in which they are located; usually these adjoining states have

The total coliform count from this study range between 25cfu/100ml in Joju and too numerous to count (TNTC) in Oju-Ore, Sango, Okede and Ijamido HH water samples as

Description: The Digital Extra Basic Course is a blended course using the Digital Extra Training Modules, Support material and CMS to make it possible for the learner to

Although the temperature used in the reactive deposition experiments of the bimetallic materials (200ºC) was generally lower than the temperatures employed in the