• No results found

The beam propagation method used for the design of an integrated optical coupler

N/A
N/A
Protected

Academic year: 2020

Share "The beam propagation method used for the design of an integrated optical coupler"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1: The IO coupler modal
Figure 3: The mode spectrum
Figure 5: The bi-directional simulation results

References

Related documents

(a) Empirical values by year and species (averaged across cohorts and microhabitats); (b) empirical values by year and microhabitat (averaged across species and cohorts). Retained

the Siberian stonechats, whereas the growth rate towards adult wing length is higher in the European stonechats (note, however, that in the European birds the wing

It was decided that with the presence of such significant red flag signs that she should undergo advanced imaging, in this case an MRI, that revealed an underlying malignancy, which

Also, both diabetic groups there were a positive immunoreactivity of the photoreceptor inner segment, and this was also seen among control ani- mals treated with a

The total coliform count from this study range between 25cfu/100ml in Joju and too numerous to count (TNTC) in Oju-Ore, Sango, Okede and Ijamido HH water samples as

Intermittent negative pressure wound therapy with instillation may be promising technique for the treatment of devastating infections associated with tumor prosthesis..

Experiments were conducted to determine appropriate quadrat sizes, efficient allocations of sampling units, satisfactory sample sizes, and data accumulation

19% serve a county. Fourteen per cent of the centers provide service for adjoining states in addition to the states in which they are located; usually these adjoining states have