• No results found

Measurement and characterisation of concrete substrate roughness in patch repairs

N/A
N/A
Protected

Academic year: 2020

Share "Measurement and characterisation of concrete substrate roughness in patch repairs"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1 Details of slab mixes.
Fig. 1 Concrete substrate surfaces obtained using either RRH or an electric hammer.
Fig. 2 Local slopes along the surface profile.
Fig. 3 Schematic diagram of fringe-based laser interferometry equipment used to measure surface roughness of the concrete substrates
+3

References

Related documents

Field experiments were conducted at Ebonyi State University Research Farm during 2009 and 2010 farming seasons to evaluate the effect of intercropping maize with

In addition to presenting a brief note about proportion in Islamic architecture, the attempt is also made to shed some light on the roots of the application of golden section

It was decided that with the presence of such significant red flag signs that she should undergo advanced imaging, in this case an MRI, that revealed an underlying malignancy, which

Also, both diabetic groups there were a positive immunoreactivity of the photoreceptor inner segment, and this was also seen among control ani- mals treated with a

colonial government asked for advices from W. Dutch Colonial Education: The Chinese Experience in Indonesia, 1900-1942. Singapore: Chinese Heritage Centre, 2005, pp..

After successfully supporting the development of the wind power technology, an approach is needed to include the owners of wind turbines in the task of realizing other ways, other

19% serve a county. Fourteen per cent of the centers provide service for adjoining states in addition to the states in which they are located; usually these adjoining states have