Road Map Revision: September 24, 2014
SAP Product Road Map
SAP BusinessObjects Design Studio
Template Revision 20120421 v3.0
5
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
The information in this presentation is confidential and proprietary to SAP and may not be disclosed without
the permission of SAP. This presentation is not subject to your license agreement or any other service or
subscription agreement with SAP. SAP has no obligation to pursue any course of business outlined in this
document or any related presentation, or to develop or release any functionality mentioned therein. This
document, or any related presentation and SAP's strategy and possible future developments, products and
or platforms directions and functionality are all subject to change and may be changed by SAP at any time
for any reason without notice. The information in this document is not a commitment, promise or legal
obligation to deliver any material, code or functionality. This document is provided without a warranty of any
kind, either express or implied, including but not limited to, the implied warranties of merchantability, fitness
for a particular purpose, or non-infringement. This document is for informational purposes and may not be
incorporated into a contract. SAP assumes no responsibility for errors or omissions in this document, except
if such damages were caused by SAP´s willful misconduct or gross negligence.
All forward-looking statements are subject to various risks and uncertainties that could cause actual results
to differ materially from expectations. Readers are cautioned not to place undue reliance on these
forward-looking statements, which speak only as of their dates, and they should not be relied upon in making
purchasing decisions.
6
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
Purpose
Product road maps are designed to support the product adoption planning activities of SAP
customers. A product road map helps a customer match short term and long term goals with
technology plans.
A product road map describes how the feature / function capabilities in an SAP product or
technology are planned to progress over time, in general:
Today = changes in the current release version
Planned Innovations = changes planned in upcoming development releases (next 12-18 months)
Future Direction = proposed themes for a product or technology beyond the planned releases
The product road maps are targeted for use by IT planners, enterprise architects, SAP
Consulting, and SAP consulting partners.
Complementary resources
For a more general description of the business problems / processes being solved and
supported by SAP, refer to Solution Road maps.
For more detailed technical information please refer to the Product Availability Matrix,
Ramp-up Knowledge Transfer materials and product documentation.
7
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
Table of contents
Product Overview
Product description
Road map overview and major product updates
Product Road Map
Today
Planned
Future
Appendix
Product Overview
Product description
9
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio
Product description
Design beautiful, responsive & personalizable BI apps
Fully customizable UI
Custom themes / stylesheets to apply corporate branding
Custom-configurable user workflows that cover key analytical &
planning
SDKs for custom visualizations, extensions & data connectors
Power analytics on BW, HANA & UNX out-of-the-box
Analysts can leverage all analytical features of BW and HANA
and strong 3rd party data support via UNX technology
Pivot table (crosstab) and pivot chart with standard context menu
for OLAP actions
Powerful standard filter & navigation components
Rich set of standard chart types, e.g. waterfall, trellis, heat map
One toolbox for SAP Enterprise BI needs
Stand-alone BI deployments on NW, HANA & BOE
Embedded BI: Integrate seamlessly with new Business Suite on
HANA (Fiori) applications
10
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
Planned Innovations
Future Direction
Today
SAP BusinessObjects Design Studio Roadmap
This is the current state of planning and may be changed by SAP at any time.
(Release 1.4)
Planned Nov 2014
Drag and drop in navigation
panel & navigation panel
usability
Context menu in crosstab
Cell locking (for planning apps)
Report to Report Interface
Script API extensions & global
functions
Multi language support
Enhanced standard analysis
template
Online composition of apps &
bookmarking
Data source SDK
Lumira (CVOM) SDK
Real-time streaming
Fiori / sFin integration
Offline click-through apps
Export data to PDF
Unmerge variables
(performance)
Improved designer experience
Geomaps
Lumira interoperability
Multi-selection in crosstab &
charts
Enhancements: mobile,
charting, scripting, online
composition
Better commentary handling
(based on new BW 7.40 SP8
capabilities)
Export to Microsoft PPT & Word
Pre-calculation & broadcasting
Adhoc exceptions & conditions
BW variants
Dynamic Analysis Office & Lumira
export
Local calculations
Additional hierarchical filter
components
Copy & paste variable values
Call RFC modules from DS scripts
Product Road Map
Today
Planned
12
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
TODAY
Planned Innovations
Future Direction
SAP BusinessObjects Design Studio 1.4
Product road map overview - key themes and capabilities
This is the current state of planning and may be changed by SAP at any time.
Drag and drop in navigation
panel & navigation panel
usability
Context menu in crosstab
Cell locking (for planning apps)
Report to Report Interface
Script API extensions & global
functions
Multi language support
Enhanced standard analysis
template
Online composition of apps &
bookmarking
Data source SDK
Lumira (CVOM) SDK
Real-time streaming
Fiori / sFin integration
Offline click-through apps
Export data to PDF
Unmerge variables
(performance)
Improved designer experience
Geomaps
Lumira interoperability
Multi-selection in crosstab &
charts
Enhancements: mobile,
charting, scripting, online
composition
Better commentary handling
(based on new BW 7.40 SP8
capabilities)
Export to Microsoft PPT & Word
Pre-calculation & broadcasting
Adhoc exceptions & conditions
BW variants
Dynamic Analysis Office & Lumira
export
Local calculations
Additional hierarchical filter
components
Copy & paste variable values
Call RFC modules from DS scripts
Lumira interoperability
(Release 1.4)
Planned Nov 2014
13
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Design beautiful, responsive & personalizable BI apps
Powerful developer support:
DS extension SDK, DS data
source SDK & Lumira SDK
Full OLAP & planning
support
Seamless data access to BW,
HANA, UNX, ESP event
streaming
Personalized online
composition for end-uses
State of the art HTML5
rendering & mobile support
Deployment options: HANA,
NW, BI
Out-of-the-box templates for
Analysis, Planning, Mobile,
Desktop, Self-Service
Embedded BI & Fiori
integration
14
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Major product updates
•
Drag and drop in navigation panel & navigation
panel usability
•
Context menu in crosstab
•
Cell locking (for planning apps)
•
Report to Report Interface
•
Script API extensions & global functions
•
Multi language support
•
Enhanced standard analysis template
•
Online composition of apps & bookmarking
•
Data source SDK
•
Lumira (CVOM) SDK
•
Real-time streaming
•
Fiori / sFin integration
15
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
“Drag & drop” for navigation and filter panel
•
Intuitive navigation via drag & drop in navigation panel
•
Designer can set drag & drop options in navigation
panel properties
New components
•
Checkbox group analog to
Radiobutton Group plus
multi-selection
SAP BusinessObjects Design Studio 1.4
Panel drag & drop and context menu
Drag & drop
within Navigation
panel
Context
menu
Context menu
•
For example: Sort, Display, Hierarchy, Totals, Filter,
Change Drilldown, Attributes
•
Report-Report Interface - “Jump to”
16
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
RRI & planning enhancement
Report-Report Interface
With the RRI, it is possible to call a jump target online
from an application during runtime.
Queries, transactions, reports and applications from
different source systems can be jump targets, along with
web addresses.
Parameterization of the target action is taken from the
drilldown of the cells from which you jump.
New component “Context Menu” gives the designer full
flexibility
Cell lock planning
It is now possible to lock individual input-ready cells in an
application for planning purposes
During runtime you can now freeze one or more selected
values while planning others.
17
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Scripting extensions
Global scripting functions
In complex application script code is called several
times, Prior to 1.4, it was usually assigned to an
invisible button.
It is now possible to create any number of the new
technical component type "Global Script Objects“,
which provides a grouping of global script
functions.
Easier building and maintanance of applications.
e.g. set visible
and set CSS
classes for
such panels
18
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Multi language support
Multi language support
Work with Design Studio applications in native
language
Design time is still English, DS applications are fully
translatable
New component text pool to add translations centrally
19
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Online composition
Use Case 1 - Fragment Bookmarking
The Designer can determine what containers can be saved
as a Fragment Bookmark.
Fragment bookmarks allow the user to bookmark a section
of an application.
This ensures bookmarks are “immune” from UI changes
introduced in a Design Studio application.
Fragment Bookmark
Fragment
Bookmark
20
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Online composition
Use Case 2 - Online Composition
Allows end-users to easily customize & personalize their
apps
Create your own fragments
Users can create fragments from their own Design Studio
applications and add them to fragment galleries
User can compose their own apps out of fragments
Fragments can come from multiple different apps
Fragments are currently tied to a single user across
Multiple Design Studio applications
Save as
Fragment
Save as
Fragment
Save as
Fragment
Save as
Fragmen
t
Save as Fragment
Fragment Gallery
21
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Online composition – fragment building blocks
User empowerment
•
Users can now autonomously create BI applications
online
•
Self-service approach eliminates the time-consuming
process of consulting with development for every little
application change
App designer can determine the behavior and the
degree to which apps can be modified and
(re)-composed
•
App designers can create different online composition
apps for different users & purposes
•
Fragment galleries store and display all the users
personal, cross-application fragments
•
End-users create a new personal layouts simply via
drag & drop
Fragment Gallery
22
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Real time / data streaming
Design Studio 1.4 comes with a real time data extension
package.
This supports the ability to create visualisations with streaming
data from esp. (
Push use case
)
“DS timer component” allows to pull data near real-time (regular
updates 3/5 secs) from HANA or BW (
Pull use case
)
Time based line charts with time axis scaling allow to better
visualise data in real time whether that is streamed or pull based.
Note:
SAP Event Stream Processor enables you to
create and run your own complex event processing
(CEP) applications to derive continuous intelligence
from streaming event data in real time.
23
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Data source SDK
Data source SDK
•
With the data source SDK it will be possible to consume
data from all kinds of data sources (for example CSV
files, via URL, 3rd party sources, or simply local data
manually added via a spreadsheet in design studio)
•
SDK components and charts can consume SDK data
sources
SDK -
JSON
BW/HANA/UN
X
External
Source
As an SDK Developer you
:
•
Reuse the already existing communication format
(‘SDK-JSON’)
•
Need to implement the SDK data source interface with its
main design studio scripting functions
•
Can also implement a data buffer, which extends a SDK
data source that provides the addcell method for easily
adding data to the data source.
24
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Data source SDK
Static datasource
•
Currently 2 components:
•
CSV datasource
•
Static datasource
•
“Static datasource”
delivers an editor grid in the
additional properties to add data manually in the
design time.
•
Supports crosstab: shows numbers and alphabetic
characters. Supports chart: shows numbers, ignores
alphabetic characters.
•
Additional new functions in the script editor, e.g.
Search, format and ‘go to line’.
25
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
CVOM SDK
Lumira & Design Studio interoperability
Mobile
Web
Monitor. Explore. Explain.
Design Studio
Lumira (Desktop)
Explore. Enrich.
Explain.
Design
Studio SDK
Lumira
SDK
Lumira (CVOM) SDK can be leveraged by both
Design Studio* & Lumira Lumira SDK for
visualizations only
Design Studio SDK is DS specific visualizations,
business logic, printing & exporting, drag & drop etc…
26
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
CVOM SDK
Lumira (CVOM) SDK integration to Design Studio
•
Build custom CVOM extensions once and use them both in
Lumira and Design Studio.
•
Application designers can use these chart components
together with the components created with the Design
Studio SDK and the standard components of Design Studio
in their applications.
27
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
SAP Fiori integration
Design Studio and SAP Fiori applications
Embedding of Design Studio applications in SAP Fiori
Launchpad
Seamless drill-through from Fiori applications and KPI tiles to
Design Studio applications (e.g. for deep analysis)
Drill-through from Design Studio to Fiori applications
Key investment in DS 1.4 is to enable those workflows for
Simplified Financials (sFin Wave 6 / SP3 / Netweaver 7.40 SP9 )
Embedding of Design Studio applications in Fiori applications
(future)
DESIGN
STUDIO
CONTENT
DESIGN
STUDIO
CONTENT
DESIGN
STUDIO
CONTENT
DESIGN
STUDIO
CONTENT
DESIGN
STUDIO
CONTENT
DESIGN
STUDIO
CONTENT
DESIGN
STUDIO
CONTENT
DESIGN
STUDIO
CONTENT
DESIGN
STUDIO
CONTENT
DESIGN
STUDIO
CONTENT
DESIGN
STUDIO
CONTENT
Fiori Launchpad sFin Wave 6 with Design Studio
28
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
Design Studio Templates in sFin Wave 6
SAP BusinessObjects Design Studio 1.4
SAP Fiori integration
29
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
PLANNED INNOVATIONS
Future Direction
Today
SAP BusinessObjects Design Studio 1.4
Product road map overview - key themes and capabilities
This is the current state of planning and may be changed by SAP at any time.
Drag and drop in navigation
panel & navigation panel
usability
Context menu in crosstab
Cell locking (for planning apps)
Report to Report Interface
Script API extensions & global
functions
Multi language support
Enhanced standard analysis
template
Online composition of apps &
bookmarking
Data source SDK
Lumira (CVOM) SDK
Real-time streaming
Fiori / sFin integration
Offline click-through apps
Export data to PDF
Unmerge variables
(performance)
Improved designer experience
Geomaps
Lumira interoperability
Multi-selection in crosstab &
charts
Enhancements: mobile,
charting, scripting, online
composition
Better commentary handling
(based on new BW 7.40 SP8
capabilities)
Export to Microsoft PPT & Word
Pre-calculation & broadcasting
Adhoc exceptions & conditions
BW variants
Dynamic Analysis Office & Lumira
export
Local calculations
Additional hierarchical filter
components
Copy & paste variable values
Call RFC modules from DS scripts
Lumira interoperability
(Release 1.4)
Planned Nov 2014
30
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Planned innovations
This is the current state of planning and may be changed by SAP at any time.
Offline click-through apps
Ability to design apps with guided navigation for
offline mobile usage
Export data to PDF
Download data froma DS app into a PDF document
Unmerge variables
Being able to unmerge variables form multile data
sources will gain performance on BW
Geomaps
Out-of-the box geomap component for designers
Lumira interoperability
Taking data from a DS app offline into Lumira
Desktop
Deploy Design Studio applications to Lumira Server
with BIP
Improved designer experience
Reduce the need for scripting in Design Time
Multi selection in cross tab & charts
Select multiple values and pass them on to other
componets, e.g. for filtering
Various enhancements
In areas such as Mobile, Charting, Scripting, Online
Composition
Better commentary
BW only: Based on New BW 7.40 SP8 Capabilities
31
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
FUTURE DIRECTION
Planned Innovations
Today
SAP BusinessObjects Design Studio 1.4
Product road map overview - key themes and capabilities
This is the current state of planning and may be changed by SAP at any time.
Drag and drop in navigation
panel & navigation panel
usability
Context menu in crosstab
Cell locking (for planning apps)
Report to Report Interface
Script API extensions & global
functions
Multi language support
Enhanced standard analysis
template
Online composition of apps &
bookmarking
Data source SDK
Lumira (CVOM) SDK
Real-time streaming
Fiori / sFin integration
Offline click-through apps
Export data to PDF
Unmerge variables
(performance)
Improved designer experience
Geomaps
Lumira interoperability
Multi-selection in crosstab &
charts
Enhancements: mobile,
charting, scripting, online
composition
Better commentary handling
(based on new BW 7.40 SP8
capabilities)
Export to Microsoft PPT & Word
Pre-calculation & broadcasting
Adhoc exceptions & conditions
BW variants
Dynamic Analysis Office & Lumira
export
Local calculations
Additional hierarchical filter
components
Copy & paste variable values
Call RFC modules from DS scripts
Lumira interoperability
(Release 1.4)
Planned Nov 2014
32
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
SAP BusinessObjects Design Studio 1.4
Future direction
FUTURE DIRECTION
This is the current state of planning and may be changed by SAP at any time.
Export to Microsoft PPT & Word
Pre-calculation & broadcasting
Adhoc exceptions & conditions
BW variants
Dynamic Analysis Office & Lumira export
Local calculations
Additional hierarchical filter components
Copy & paste variable values
Call RFC modules from DS scripts
33
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
Related road maps
Readers may also be interested in the following related road maps
Related product road maps available on
Service Marketplace
:
SAP BusinessObjects Analysis, edition for OLAP
SAP BusinessObjects Analysis, edition for Microsoft Office
Other business analytics product road maps can be found on the Analytics tab of the Road Maps page on
Thank you
Road map contacts for customers and partners
35
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
Key links for more information
For customers and partners (1 of 2)
Key links
Road maps on SAP Service
Marketplace
http://service.sap.com/saproadmaps
SAP Community Network
http://www.sdn.sap.com/
Design Studio Release Notes
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?
numm=1948049
PAM information
https://service.sap.com/pam
Documentation
http://help.sap.com/boad
Sizing Information
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?
numm=1177020
Performance Tips and Tricks
http://scn.sap.com/community/businessobjects-design-
studio/blog/2013/11/29/optimize-the-performance-of-your-sap-businessobjects-design-studio-solutions-tips-and-tricks
36
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
Key links for more information
For customers and partners (2 of 2)
Where to go to provide product feedback and ideas
SAP Idea Place
https://ideas.sap.com/ct/s.bix?c=6055F3C4-E8DA-454F-9C49-85D5A5070BCE
Influence programs
http://service.sap.com/influence
SAP User Groups
http://www.sapusergroups.com/
38
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement
Customer
© 2014 SAP SE or an SAP affiliate company.
All rights reserved.
No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP SE or an
SAP affiliate company.
SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP SE
(or an SAP affiliate company) in Germany and other countries. Please see
http://global12.sap.com/corporate-en/legal/copyright/index.epx
for additional
trademark information and notices.
Some software products marketed by SAP SE and its distributors contain proprietary software components of other software vendors.
National product specifications may vary.
These materials are provided by SAP SE or an SAP affiliate company for informational purposes only, without representation or warranty of any kind,
and SAP SE or its affiliated companies shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP SE or
SAP affiliate company products and services are those that are set forth in the express warranty statements accompanying such products and
services, if any. Nothing herein should be construed as constituting an additional warranty.
In particular, SAP SE or its affiliated companies have no obligation to pursue any course of business outlined in this document or any related
presentation, or to develop or release any functionality mentioned therein. This document, or any related presentation, and SAP SE’s or its affiliated
companies’ strategy and possible future developments, products, and/or platform directions and functionality are all subject to change and may be
changed by SAP SE or its affiliated companies at any time for any reason without notice. The information in this document is not a commitment,
promise, or legal obligation to deliver any material, code, or functionality. All forward-looking statements are subject to various risks and uncertainties
that could cause actual results to differ materially from expectations. Readers are cautioned not to place undue reliance on these forward-looking
statements, which speak only as of their dates, and they should not be relied upon in making purchasing decisions.
39
© 2014 SAP SE or an SAP affiliate company. All rights reserved.
This presentation and SAP‘s strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement