RESIDENTIAL HUD SIDE PLUMBING ELECTRIC WATER HEATERS

Main Water Supply Cold Water Inlet Valve Cold Water Supply to Fixtures Hot Water Outlet Union Temperature and Pressure Relief Valve Discharge line 6” maximum above drain Drain line

TEMPERATURE AND PRESSURE RELIEF VALVE A new combination temperature and pressure relief valve, complying with the Standard for Relief Valves and Automatic Gas Shutoff

Relief Valve Pressure Relief Valve Discharge Water Shutoff Drain Valve Valve Hot Water Supply Union Outlet Drain Tube to suitable drain Cold Water Supply Inlet

Shutoff valve is installed after pressure and temperature relief valve on outlet if required by local or national plumbing codes..  If the hot water process is not at the

VALVE COLD INLET WATER LINE HOT OUTLET TO HOUSE TEMPERATURE- PRESSURE RELIEF VALVE DISCHARGE PIPE (Do not cap or plug).. PROVIDE A 6 ″″ AIR GAP

When checking the temperature-pressure relief valve operation, make sure that (1) no one is in front of or around the outlet of the temperature- pressure relief valve discharge

When checking the temperature-pressure relief valve operation, make sure that (1) no one is in front of or around the outlet of the temperature- pressure relief valve discharge

❑ Temperature and Pressure Relief Valve properly installed and discharge line run to open drain.. ❑ Discharge line protected