• No results found

ADSL Router Freedom in a box

N/A
N/A
Protected

Academic year: 2021

Share "ADSL Router Freedom in a box"

Copied!
18
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Graphic help which will guide you along  the whole start up procedure to connect  to the Internet and the advanced  configu-ration of the ADSL Service

References

Related documents

You will need to install one line filter for each device that is connected to a telephone socket Do NOT connect a line filter to the ADSL modem, as it will block the ADSL

On longer phone lines, ADSL2 will provide a data rate increase of 50 kbps for upstream and downstream; a significant increase for those customers who need it most.. This data

L If you use a DSL/ADSL service, we recommend connecting a filter (contact your DSL/ADSL service provider) to the telephone line between the base unit and the telephone line

Verify that the phone line cable is correctly connected to the ADSL connector and to the phone socket (See Step 1 in the section “Start using your ADSL... ” in this guide)..

Typical ADSL Point-to-point system @ISP @home Telephone company ISP company Your home ATM Ethernet splitter ADSL router (bridged mode) DSLAM (ADSL modem @telephone company).

If you are receiving an ADSL Internet access service over the telephone line over which you are receiving Foxtel Home Phone service (such as Foxtel Broadband on ADSL or any

If you are receiving an ADSL Internet access service over the telephone line over which you are receiving Foxtel Home Phone service (such as Foxtel Broadband on ADSL or any

Ø Plug the opposite Router Power Supply telephone cable (right top corner on the Router Power Supply) into the ADSL router/modem socket marked ‘LINE’.. The cable from the top left