Product registration

(1)

SFF, Swedish Insurance Association, Sweden

FC, The Federation of Finnish Financial Services, Finland

FNH, Norwegian Insurance Association, Norway

F&P, Danish Insurance Association, Denmark

Registration of anti-intruder products by the

Nordic insurance associations

(2)

Nordic insurance associations 2

1. FOREWORD ... 2

2. REGISTRATION ... 3

3. REGISTRATION PERIOD... 4

4. IMPLEMENTATION ... 4

5. DISCONTINUATION OF PERFORMANCE SPECIFICATIONS ... 4

6. APPLICATION FOR REGISTRATION ... 5

7. DEFINITIONS ... 5

APPENDIX 1: LIST OF PERFORMANCE SPECIFICATIONS FOR ANTI-INTRUDER PRODUCTS (STATING WHICH SPECIFICATIONS ARE APPROVED BY THE INDIVIDUAL INSURANCE ASSOCIATION). ... 8

AUTOMATIC INTRUDER ALARMS (AIA): ... 8

Environmental requirements... 8

Intruder alarm systems ... 9

Alarm transmission systems ... 10

MECHANICAL ANTI-INTRUDER PRODUCTS:... 12

Secure-storage units:... 12

Grating cupboards and plate cupboards ... 14

Intruder-resistant doors... 15

Gates... 15

Windows... 16

Gratings and shutters ... 16

Security glazing... 17

Iron and plywood sheeting ... 18

Locks and latches... 18

Padlocks and padlock fittings... 19

Locks for French windows ... 19

Lockable fittings for windows ... 20

Key-storage boxes ... 20

Container locks, special locks ... 20

Locks for bicycles, mopeds and motor cycles... 21

Locks for boat motors ... 21

Security devices for computer equipment ... 21

Fog diffusers ... 22

APPENDIX 2: APPLICATION FORM... 23

APPENDIX 3: DECLARATION CONCERNING CONFORMITY ... 25

(3)

The Nordic insurance associations, SFF/Sveriges Försäkringsförbund (Sweden),

FC/Finansbranchens Centralförbund (Finland), FNH/Finansnæringens Hovedorganisasjon (Norway) and F&P/Forsikring & Pension (Denmark), have approved a joint system for registration of anti-intruder products applicable to burglary and theft insurance.

In Norway, FNH/Norwegian Insurance Association is represented by FG/Forsikrings-selskapenes Godkjennelsesnevnd.

The aim of the scheme is to promote the intentions of the European Common Market to enable products “approved” in one European country also to be used in another European country. The scheme described in this document applies, however, only to anti-intruder products registered by insurance associations in the Nordic countries. A secondary purpose of the registration scheme is to ensure that insurers and their customers can readily access a list of many suitable anti-intruder products. It should be noted that insurers can stipulate the use of specific anti-intruder devices, and it is only the particular insurance contract that can specify which anti-intruder products may be used for individual security purposes.

Anti-intruder products registered with the insurance association of one Nordic country can be registered with insurance associations in other Nordic countries if the individual association maintains a registration list or if the association lays down special quality requirements for products tested and certified in accordance with performance specifications approved by the insurance association concerned.

2. Registration

An anti-intruder product can be registered when the requester produces:

• A completed application form. (Appendix 2)

• A copy of a certificate issued by an accredited certification agency located in an EU/EEA member state *)

• User guide in the language of the country concerned.

• Installation instructions in the language of the country or in English – unless otherwise specified by the relevant insurance association.

• A declaration (Appendix 3) to the effect that the product must not be modified during the period for which registration applies.

• Where the applicant is a person other than the certificate holder, the certificate holder must provide a declaration in writing authorising the applicant to use the certificate in connection with registration of the product.

*) Requirements to accreditation and certification agencies:

• Certification agency conforming to quality standard EN 45011:1998 / ISO/TEC guide 65:1996. The actual accreditation must cover the involved standards.

• The certification agency must be accredited by an accreditation agency in an EU/EEA member state.

• The accreditation agency must b a member of European Accreditation (EA).

• The certificate must comply with the following:

• The certificate must be in English.

• Certification must be based on a test conducted in accordance with relevant performance specifications, valid at the time of application, and listed in Appendix 1.

• The certificate must include information showing which version of the performance specifications certification was issued under.

(4)

Nordic insurance associations 4 • The certificate must state which class the product achieved under the relevant

performance specifications.

• Documentation must be provided proving the attestation of the certification agency and its authority to issue product certification. Documentation must be in English.

In addition to anti-intruder products tested and certificated in accordance with the above, registration can be provided for mechanical products tested in accordance with performance specifications approved by the Nordic insurance associations (see “Sammenligningsnøgle”, Comparative List dated June 1, 2004, relating to mechanical anti-intruder products – compiled by the Nordic insurance associations), provided that such products are listed in accordance with pt. 1. Such anti-intruder products can be registered when the applicant provides a copy of a valid document of conformity issued by one of the Nordic insurance associations.

Any costs in connection with registration must be met by the applicant. Costs differ in the various national insurance associations.

3. Registration period

Registration is limited in time to the period of validity stated on the certificate or the document of conformity, subject to a maximum registration period of five years. Before expiry of the registration period the applicant can apply for a new registration period by submitting a valid certificate or document of conformity accompanied by a declaration by the applicant (Appendix 3) to the effect that the product is identical to that for which the

certificate or document of conformity was issued. Such an application must be made to each of the Nordic insurance associations with whom it is wished to maintain the registration. The registration of an anti-intruder product can be renewed repeatedly if the product has not changed or if the product continues to have a valid certificate or document of conformity.

4. Implementation

Anti-intruder products which appear on a registration list of products maintained by a Nordic insurance association (cf. pt. 1) can be registered on the registration lists of each of the Nordic countries with the expiry date which applies to registration of the product hitherto.

5. Discontinuation of performance specifications

In the event that performance specifications are no longer recognised in one of the individual national insurance associations, any registered products complying with these specifications can continue to be registered until expiry of the certificate/document of conformity, subject to a maximum period of five years.

In the event that a specific set of performance specifications ceases to be recognised or in the event of discontinuation of performance specifications, each Nordic insurance association can individually opt to continue to register the anti-intruder products concerned in accordance with pt. 3, Registration period.

Withdrawal of the insurance associations’ approval of performance specifications requires a period of at least 12 months’ notice.

Notice of withdrawal of approval of performance specifications will be published on the association’s website or in the form of a notice from the body that issued the specifications.

(5)

6. Application for registration

Application for registration must be submitted to each of the Nordic insurance associations; details of the required procedure are given on their websites.

SFF, Sveriges Försäkringsförbund, www.forsakringsforbundet.com

FC, Finansbranchens Centralförbund, www.fkl.fi

FNH, Finansnæringens Hovedorganisasjon, Norge, www.fnh.no

FG, Forsikringsselskapenes Godkjennelsesnevnd, Norge, www.fg.fnh.no F&P, Forsikring & Pension, www.forsikringenshus.dk/

7. Definitions

This document uses the following definitions:

Accreditation agency Accreditation agency based in an EU/EEA member state and a member of European Accreditation (EA).

Accredited certification agency A certification agency in an EU/EEA country which satisfies quality standard EN

45011:1998 / ISO/IEC Guide 65:1996 for product certification, and is accredited by an accreditation agency in an EU/EEA country under special legislation and is subject to the special control of the accreditation agency. (Certification agencies which are members of the European Fire and Safety Group – EFSG – have specialised in the certification of anti-intruder products.)

CEN The European organisation for national

standards organisations – Comité Européen de Normalisation

CENELEC The European organisation for national

standards organisations in the

electrotechnical field – Comité Européen de Normalisation Électrotechnique

Finansnæringens Hovedorganisation FNH is the organisation representing the financial sector – banks, financial institutions and insurance companies – in Norway.

www.fnh.no

The Federation of Finnish Financial Services FC is a special-interest organisation looking after the joint interests of insurance and banking companies active in Finland.

(6)

Forsikring & Pension An organisation in Denmark representing insurers and cross-company pension funds.

www.ForsikringensHus.dk

Approval document A type of document of conformity, verifying tests and classification of mechanical anti-intruder products tested in accordance with F&P Denmark’s Standard Theft Method. Performance specifications Technical specifications stipulated by a

requesting party – e.g. an insurance company – as a necessary condition of insurance. or

Specification of technical properties for a product, e.g. a standard or other technical specifications approved by one of the Nordic insurance associations, e.g. from CEA, SSF, SFF, FG, FC or F&P.

See Appendix 1.

Document of conformity A document other than a certificate, which confirms conformity with performance specifications, e.g. “SSF-intyg”, “FG-godkjennelse” or “F&P Godkendelsesblad”.

Product certification Process under which an accredited

certification agency issues documentation to the effect that a product has been tested in accordance with and meets the requirements laid down in a defined product standard.

Registration A list of products which accompanies this

document.

Registration scheme The scheme described in this document. Period of registration The period during which a product can be

registered without requiring renewal of registration and which can be a maximum of five (5) years subject to a maximum of the period shown in the certificate or the document of conformity.

Requester Producer, importer or seller of an

anti-intruder product who wishes to have the product included on the insurance association’s registration list.

Certificate Document issued by an accredited

(7)

with an EN, ENV or Technical Specification from CEN or CENELEC.

Anti-intruder products In the context of this document: products providing mechanical resistance to intrusion, e.g. locks, gratings, etc., and products for electronic monitoring, e.g. sensors and central equipment for automatic intruder-alarm systems.

Standard Theft Method (STM) Forensic testing method to assess the intrusion resistance of mechanical anti-intruder products. The method was designed by F&P Denmark.

Sveriges Försäkringsförbund SSF is a joint organisation for insurers who conduct insurance activities in Sweden. The organisation safeguards the interests of members and their opportunities for carrying on business in Sweden and abroad.

(8)

Appendix 1: List of performance specifications for anti-intruder products

(stating which specifications are approved by the individual insurance

association).

Dated references are subject to current and subsequent versions of the standards mentioned.

Automatic intruder alarms (AIA):

European product standards (EN) and Technical specifications (TS) published by CENELEC, and SSF 1014 ver. 3.

Environmental requirements

Specification Title Publication Approved by: FC SFF FNH F&P EN 50130-4:1995 Alarm systems—Part 4:

Electromagnetic compatibility - Product family standard:

Immunity requirements for components of fire, intruder and social alarm systems

December 1995 x - x x

EN 50130-4:1995/A1:1998

Amendment to scope of EN March 1999 x - x x

EN 50130-4:1995/A2:2003

Alarm systems—Part 4:

Electromagnetic compatibility - Product family standard:

Immunity requirements for components of fire, intruder and social alarm systems

September 2003 x - x x

EN 50130-5:1998 Alarm systems—Part 5: Environmental test methods

(9)

Intruder alarm systems

Specification Title Publication Approved by:

FCF SFF FNH F&P EN 50131-1:1997 Alarm systems - Intrusion

systems—Part 1: General requirements

March 1997 x 1x x x

TS 50131-2-2:2004

Alarm systems - Intrusion systems—Part 2-2: Requirements for passive infrared detectors

August 2004 x 1x x x

TS 50131-2-3:2004

Alarm systems - Intrusion systems—Part 2-3:

Requirements for microwave detectors

TS 50131-2-4:2004

Requirements for combined passive infrared and microwave detectors

TS 50131-2-5:2004

Requirements for combined passive infrared and ultrasonic detectors

April 2004 x x x x

TS 50131-2-6:2004

Alarm systems - Intrusion systems—Part 2-6: Requirements for opening contacts (magnetic)

August 2004 x x x x

TS 50131-3:2003 Alarm systems - Intrusion systems—Part 3: Control and indicating equipment

July 2003 x x x x

EN 50131-5-3:200X

Alarm systems - Intrusion systems—Part 5-3: Requirements for

interconnections equipment using radio frequency techniques

July 2005 x x x x

EN 50131-6:1997 Alarm systems - Intrusion systems—Part 6: Power supplies

(10)

SSF 1014-1 Alarm system, Central unit, Specifications and testing

1998

Stop for test

- - - -

SSF 1014-3 Alarm system, materials, specifications and testing

September 2005 x x x x

AIA-212 F&P, Intruder Alarm Systems External key pad, tab 230

April 1998 - - - x

AIA-212 F&P, Intruder Alarm Systems, Key-storage boxes, Temper Test

October 1999 - - - x

AIA-212 F&P, Intruder Alarm Systems, Passive glass break detectors, tab 230

April 2002 x - x x

AIA-212 F&P, Intruder Alarm Systems, Acustic glass break detectors, tab 230

April 1999 x - x x

AIA-212 F&P, Intruder Alarm Systems, Secure-storage switches tab 230

April 1999 x - x x

AIA-212 F&P, Intruder Alarm Systems, Ultrasound detectors, tab 230

April 1999 x - x x

Note 1: incorporated in SSF 1014-3

Alarm transmission systems

FC SFF FNH F&P EN

50136-1-1:1998

Alarm systems - Alarm transmission systems and equipment—Part 1-1: General requirements for alarm

transmission systems

January 1998 - - x x

EN 50136-1-1:1998/A1:2001

transmission systems

(11)

EN 50136-1-2:1998

Alarm systems - Alarm transmission systems and equipment—Part 1-2:

Requirements for systems using dedicated alarm paths

EN 50136-1-3:1998

Requirements for systems with digital communicators using the public switched telephone network

EN 50136-1-4:1998

Requirements for systems with voice communicators using the public switched telephone network

EN 50136-2-1:1998

transmission equipment

EN 50136-2-1:1998/A1:2001

transmission equipment - Amendment 1

EN 50136-2-2:1998

Alarm systems - Alarm transmission systems and equipment—Part 2-2: Requirements for equipment used in systems using dedicated alarm paths

EN 50136-2-3:1998

Alarm systems - Alarm transmission systems and equipment—Part 2-3: Requirements for equipment used in systems with digital communicators using the public switched telephone network

(12)

EN 50136-2-4:1998

Alarm systems - Alarm transmission systems and equipment—Part 2-4: Requirements for equipment used in systems with voice communicators using the public switched telephone network

TS 50136-4:2004 Alarm systems - Alarm transmission systems and equipment—Part 4:

Annunciation equipment used in alarm receiving centres

April 2003 - - x x

TS 50136-7:2004 Alarm systems - Alarm transmission systems and equipment—Part 7: Application guidelines

April 2003 - - x x

CEA 4039:2002-8

Aim Oriented Requirements for Alarm Transmission Systems

August 2002 x - - -

Mechanical anti-intruder products:

Secure-storage units:

European product standards (EN) published by CEN

Specification Title Publication Approved by: _{FC SFF FNH F&P} EN 1143-1 Secure storage units -

Requirements, classification and methods of test for

resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms

August 2005 x x x x

EN 1143-2 Secure storage units -

Requirements, classification and methods of test for resistance to burglary - Part 2: Deposit systems

February 2002 x - x x

EN 14450 Secure storage units -

Requirements, classification and methods of tests for resistance to burglary - Secure safe

(13)

cabinets.

Inter-Nordic standard

Specification Title Publication Approved by: _{FC SFF FNH F&P} INSTA 610 Safe-storage units - Testing and

evaluation of burglary resistance

Stop for test x - x x

INSTA 611 Safe-storage units - Night safes - Testing and evaluation of their burglary resistance

INSTA 612 Safe-storage units - Automated teller machines - Testing and evaluation of burglary resistance

Norsk Standard (Norwegian Standard)

Specification Title Publication Approved by: _{FC SFF FNH F&P} NS 5089 Storage units - Testing and

Dansk Standard (Danish Standard)

Specification Title Publication Approved by: _{FC SFF FNH F&P} DS 2121 Safe-storage units - Testing -

Grades security evaluation

Svensk Standard (Swedish Standard)

(14)

SS 3000 Safe storage units - Testing and evaluation of burglary

resistance

Stop for test - - x x

SS 3492 Burglary protection cupboards and security cupboards - Testing and evaluation of burglary resistance

June 1996 x x x x

Finsk Standard (Finnish Standard)

Specification Title Publication Approved by: _{FC SFF FNH F&P} SFS 5870 Safety cupboards. Testing and

evaluation of burglary

resistance

June 1999 x - x x

Forsikringsselskapenes Godkjennelsesnevnd, Norway

Specification Title Publication Approved by: _{FC SFF FNH F&P} FG-norm Safety cupboards, Insurers’

requirements for testing and approval

1985 - - x x

Standard theft method, F&P Denmark

Specification Title Publication Approved by: _{FC SFF FNH F&P} STM Group 2 F&P, Anti-intruder catalogue,

Marker 110

January 1985

Stop for test July 2005

x - x x

Grating cupboards and plate cupboards

(15)

STM Group 1 F&P, Anti-intruder catalogue, Marker 110

January 1985 - - - x

Intruder-resistant doors

European product standard (ENV) published by CEN

Specification Title Publication Approved by: _{FC SFF FNH F&P} ENV 1627 Windows, doors, shutters -

Burglar resistance -

Requirements and classification

January 1999 x x x x

Norsk Standard (Norwegian Standard)

Specification Title Publication Approved by: _{FC SFF FNH F&P} NS 3170 Doors and doorsets - Burglary

resistance - Classification, requirements and test

January 1992 x - x x

FC SFF FNH F&P SS 817345 Doors and doorsets - Burglar

resistance - Classification, requirements and test

October 1989 x x x x

Marker 110

January 1985

x - x x

Gates

(16)

ENV 1627 Windows, doors, shutters - Burglar resistance -

January 1999 x - x x

Marker 110

January 1985

x - x x

Windows

January 1999 - x - x

Specification Title Publication Approved by: _{FC SFF FNH F&P} SS 818133 Windows - Burglar resistance -

Requirements and test

December 1981 - - - x

Marker 110

January 1985

- - - x

Gratings and shutters

(17)

January 1999 x x x x

Forsikringsselskapenes Godkjennelsesnevn, Norway

Specification Title Publication Approved by: _{FC SFF FNH F&P} FG standard Gratings. Insurers’ rules for

testing and approval.

July 2001 x - x x

Svenska Stöldskyddsföreningen/SSFN (Swedish Theft Prevention Assn.)

FC SFF FNH F&P SSFN 012,

ver. 2

Norm for gratings,

specifications and classification

July 1993 x x x x

SSFN 013, ver. 2

Norm for gratings,

specifications and classification

July 1993 x x x x

Marker 110

January 1985

x - x x

Security glazing

Specification Title Publication Approved by: _{FC SFF FNH F&P} EN 356 Glass in building - Security

glazing - Testing and classification of resistance against manual attack

(18)

EN 1063 Glass in building - Security glazing - Testing and classification of resistance against bullet attack

November 2002 - - x x

Inter-Nordic standard

Specification Title Publication Approved by: _{FC SFF FNH F&P} INSTA 151 Security glazings - Hard body

impact testing

INSTA 152 Security glazings - Sharp body impact testing

INSTA 153 Security glazings - Testing of bullet resistance

FC SFF FNH F&P STM Group 1 F&P, Anti-intruder catalogue,

Marker 110

January 1985

- - x x

Iron and plywood sheeting

Marker 110

January 1985

- - - x

Locks and latches

Specification Title Publication Approved by: _{FC SFF FNH F&P} EN 12209 Building hardware - Locks and

latches - Mechanically operated locks, latches and locking plates - Requirements and test

methods

(19)

EN 1303, ver. 2 Building hardware - Cylinders for locks - Requirements and test methods

February 2005 x 2x x x

Note 2: incorporated in SS 3522

Specification Title Publication Approved by: _{FC SFF FNH F&P} SS 3522,

ver. 4

Door and window fittings - Fixed mounted locks - Classification

December 2004 x x x x

Padlocks and padlock fittings

European product standard (EN) published by CEN

Specification Title Publication Approved by: _{FC SFF FNH F&P} EN 12320 Building hardware - Padlocks

and padlock fittings -

Requirements and test methods

July 2001 x - x x

Specification Title Ugivelse Approved by: _{FC SFF FNH F&P} SSFN 014,

ver. 2

Norm for padlocks, specifications and testing

June 2002 x x x x

SSF 018, ver. 2

Padlock fittings, specifications

and testing April 2005 x x x x

Locks for French windows

Specification Title Publication Approved by: _{FC SFF FNH F&P} SS 3620, class B Door and window fittings -

Burglar resistance - Additional lockable fittings for windows and French windows -

Requirements

(20)

Lockable fittings for windows

Specification Title Publication Approved by: _{FC SFF FNH F&P} SS 3620, class A Door and window fittings -

Burglar resistance - Additional lockable fittings for windows and French windows -

Requirements

February 1989 - x - x

Key-storage boxes

Specification Title Publication Approved by: _{FC SFF FNH F&P} SSFN 024, ver. 1 Key-storage boxes, Specifications x x - x SSFN 025, ver. 1

Key-storage boxes, Testing _x _x _- x

Finsk Standard (Finnish Standard)

FC SFF FNH F&P SFS 5870 Safety cupboards. Testing and

June 1999 x - - x

FC SFF FNH F&P STM Group 1 F&P, Anti-intruder catalogue,

Marker 110

January 1985 x - - x

Container locks, special locks

Marker 110

(21)

FC SFF FNH F&P SSF 1050,

ver. 1

Locking bar June 2005 x x x x

Locks for bicycles, mopeds and motor cycles

Specification Title Publication Approved by: _{FC SFF FNH F&P} SSFN 011,

ver. 2

Locks for bicycles, Specifications and testing

x x x x

FC SFF FNH F&P TFFN 701.

ver. 1

Locks for motor cycles and mopeds. Specifications.

January 1997 - x x x

Danish Institute for Informative Labelling (DVN)

Specification Title Publication Approved by: _{FC SFF FNH F&P} DVN 5029:3 DVN guidelines for bicycle

locks

August 1993 - - x x

Locks for boat motors

SFF, Swedish Insurance Association, Sweden

Specification Title Publication Approved by: _{FC SFF FNH F&P} SSFN 026,

ver. 1

Locks for outboard motors, Specifications and testing

November 1992 - x - x

Security devices for computer equipment

Marker 110

(22)

Fog diffusers

Verband der Sachversicherer e.V., Germany

Specification Title Publication Approved by: _{FC SFF FNH F&P} VdS 2525 Richlinien für

Sicherungseinrichtungen - Nebelgeräte, anforderungen

99/- - - - x

CNPP, Centre National de Prèvention et de Protection, France

Specification Title Publication Approved by: _{FC SFF FNH F&P} CNPP DTG

04.179

Specification for Smoke or Fog Diffusers

July 2004 - - - x

British Standard, UK

Specification Title Publication Approved by: _{FC SFF FNH F&P} BS 7939-1999 Smoke security devices – Code

of practice for manufacture, installation and maintenance

99/- - - - x

Specification Title Publication Approved by: _{FC SFF FNH F&P} SSF 1043,

ver. 1

Equipment, Fog diffuser – Specifications

2004 - x - x

(23)

Appendix 2: Application form

Forsikring & Pension

Business organisation representing insurance companies and pension funds in Denmark

Forsikringens Hus, Amaliegade 10, 1256 Copenhagen K – Tel. +45 3343 5500.

Application to register an anti-intruder product

Applicant’s name(supplier)

Address

Telephone / fax / e-mail address

Type of product

e.g. glass-break detector or roller shutter

Name of product Class/grade

Manufacturer if different from supplier Address

Telephone / fax / e-mail address

Performance specification (standard)

Certification agency

Certificate no. Certificate expiry date

Comment

Appendix (obligatory)

Copy of product certificate issued by an accredited certification agency and

Copy of certificate showing certification agency’s accreditation for product certification covering the involved standards issued by accreditation agency who is a member of European Accreditation (EA). or

For mechanical security devices: copy of document of conformity from a Nordic insurance organisation (FG, SFF or FC)

Declaration by certificate holder to the effect that the applicant may use the certificate in connection with registration of the product (where the applicant and certificate holder are not the same person).

Information for applicant concerning F&P registration:

The following information must be provided with/on the product: - type of product

- confirmation that the product is F&P registered - date of manufacture

(24)

- information on who provides service, repair and technical assistance. The product must be accompanied by:

- planning and installation instructions in Danish or English - maintenance, service and user’s instructions in Danish

F&P registration is valid for a period of five years not to exceed the date of expiry of the certificate/document of conformity.

If the product is to remain on F&P’s list after that date, a fresh application must be submitted to Forsikring & Pension, Denmark, not later than one month before expiry of the current registration period.

(25)

Appendix 3: Declaration concerning conformity

Forsikring & Pension

Business organisation representing insurance companies and pension funds in Denmark

Forsikringens Hus, Amaliegade 10, 1256 Copenhagen K – Tel. +45 3343 5500.

Declaration concerning conformity

With regard to our application to Forsikring & Pension, Denmark, concerning registration of an anti-intruder product for

____________________________________________________

(product name)

we hereby confirm that we are familiar with F&P’s conditions of registration, and that we accept them and confirm that we will:

• manufacture and/or sell products which are identical to the registered product.

• inform F&P without delay – and if possible in advance – of any modifications in the registered product if such modifications can affect the properties of the product.

• inform F&P without delay of any changes in the applicant company which can affect that company’s obligations in respect of the registered product.

This declaration shall remain in force as long as we manufacture and/or sell the aforesaid product registered with F&P.

Date __________________________________________________________ Signature _____________________________________________________ Name of applicant/supplier _______________________________________