Product Specifications

15  Download (0)

Full text

(1)

Product

Specifications

November 2012

In

S

to

ck

at

W

O

LF

Ki

tch

en

-at

-a-

Ti

me

(2)

WOLF CLASSIC CABINETS

FINISH PROCESS

Exceptional Style, Exceptional Value

WOLF Classic Cabinets proudly offers eleven of today’s most popular door style/finish combinations at extremely attractive

price points, including no up charges for the upscale look of paints and glazes. With a broad selection of SKUs,

accessories and moldings, WOLF Classic Cabinets will make your design as beautiful as it is affordable.

Quality is in the Details

WOLF Classic Cabinets are proudly made in the USA, factory-assembled from hand selected American Maple without

cams, brackets or clips. All drawer boxes are dovetailed for strength at no additional charge. In addition, our finishes are

machine-applied using the latest technology to ensure a smooth, even look. Corrugated packaging is securely strapped,

fully encasing your product and assuring safe arrival without damage.

Speed and Reliability

Because WOLF Classic Cabinets are manufactured domestically, there’s no need to worry about disrupted supply,

delayed containers or other issues common among similarly priced products. You won’t need to carry a large inventory

or buy extra product as a failsafe. With every SKU in stock at our Pennsylvania or Georgia Distribution Center, your order

is available to ship quickly.

Certified Stewards of the Environment

In addition to being certified with the Kitchen Cabinet Manufacturers Association (KCMA), WOLF products also meet

the standards of the KCMA’s Environmental Stewardship Program (ESP). Participants in the program are held to strict

requirements in support of responsible forest management that promotes sustainability and long-term economic and

environmental benefit. This responsibility includes recycling our saw dust, using low VOC finishes and CARB

approved plywood.

Whether you’re looking for style, quality, affordability – or all three – look no further than WOLF Classic Cabinets.

1. All surfaces are machine sanded

2. Dust particles are removed before entering each

spray machine

3. Product enters an automated finish system where

solvent-based pigment stain is applied

4. Product is sealed and put through a pre-cure

drying process

5. Complete cure is done with slow bake process

6. All edges of parts are hand sanded before put

in a brush sanding machine

7. Final topcoat is applied and put through a pre-cure

process followed by slow bake for final, thorough curing

8. Clear finishes use a catalyzed varnish & Paint finishes

use a pre-catalyzed varnish

9. Products are inspected for defects, cleanliness

and smoothness

10. The front side of the products gets a stain coat,

a sealer coat and final top coat. The backs of drawer

(3)

Naturally occurring wood characteristics such as variations in color, grain, mineral streaks and knots are not considered defects.

Color variations are a natural occurrence due to species, age, character of cabinets, and exposure to UV light and sunlight. Such variations and changes are not considered defects. For these reasons, new and/or replacement cabinets may not match display samples and/or existing cabinets. Warping is the bending or twisting of a part. To measure a door or shelf, lay the product on a flat surface and measure the gap from the surface to the part. The standard allowable tolerance for wood is 1/8” per lineal foot. Materials that fall within specification are considered acceptable, as a part of the natural characteristics of wood.

WOOD CHARACTERISTICS & VARIATIONS

CABINET SPECIFICATIONS

Half-depth adjustable shelf of 3/4” plywood with bull nosed, foil covered front edges. The shelves are held in place with self-locking clips on the sides.

Side panels – 1/2” plywood with matching exterior laminate – glued and stapled in a 1/2” dado in the cabinet’s front frame.

Back panels – made from vinyl covered (inside only) 1/2” plywood – are glued and nailed in a 1/2” dado and stapled to the hang rail and cabinet bottom. All wood 3/4” corner blocks are installed on all corners.

Cabinet fronts are made from 3/4” solid maple wood. Front stiles are pocket drilled and assembled with 1-1/4” screws for rugged durability. Bottoms are 1/2” solid maple wood.

BASE CABINETS

Cabinet fronts are made from 3/4” solid wood. Front stiles are pocket drilled and assembled with 1-1/4” screws for rugged durability. Tops are 1/2” solid maple wood.

Side panels – 1/2” plywood with matching exterior laminate – glued and stapled in a 1/2” dado in the cabinet’s front frame.

Back panels – made from vinyl covered (inside only) 1/2” plywood – are glued and nailed in a 1/2” dado and stapled to the cabinet tops and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet. Adjustable 3/4” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with a self-locking clips on the sides.

WALL CABINETS

FINISH, DRAWERS & HINGES

All drawers are constructed using 5/8” clear finished solid wood with dovetail construction. Drawer bottom is 1/4” plywood in a dado into drawer sides. All drawers (including Pull Outs) are rated for 75lbs.

Saginaw: Side mount, standard epoxy glides

Dartmouth & Hudson: Full extension, under mount glides with soft-close Saginaw: Hidden, six-way adjustable hinge

Dartmouth & Hudson: Hidden, six-way adjustable hinge with installed snap on soft-closing mechanism.

All cabinets that require handing are handed left (hinge is on the left when looking at the cabinet). Wall cabinets can simply be flipped over to change hinging. For base cabinets, remove and flip door then screw to other side. Adjustable 3/4” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with a self-locking clips on the sides. All cabinet front and door surfaces receive stain or paint and a catalyzed clear finish. Our finish provides a deep, rich wood tone that is resistant to household chemicals, water, food stains and mild acids.

(4)

INVENTORIED DOOR STYLES

SAGINAW



Veneer Raised Center Panel



Partial Overlay



All Maple Face Frames & Doors



Wood Dovetailed Drawer



Side-mount Epoxy Glides

Available Colors:



Chestnut (GA)



Crimson (PA)



Honey (PA)

DARTMOUTH



Veneer Recessed Panel Shaker



Full Overlay



All Maple Face Frames & Doors



Wood Dovetailed Drawer



Soft-close Door/Drawer



Full Extension, Undermount Glides



Plywood Center Panel

Available Colors:



Crimson (GA)



Dark Sable (GA)



Honey (PA)



Painted White (PA)

HUDSON



Raised Center Panel Pillow Miter



Full Overlay



All Maple Face Frames & Doors



Wood Dovetailed Drawer



Soft-close Door/Drawer



Full Extension, Undermount Glides



Solid Wood Center Panel

Available Colors:



Painted Antique White (PA)



Crimson w/ Chocolate Glaze (GA)



Heritage Brown w/ Chocolate Glaze (PA)

GA: Stocked in our Georgia Facility / PA: Stocked in our Pennsylvania Facility. Additional colors available by full truckload. See your WOLF Sales Consultant for details.

CIRCA



Slab



Full Overlay



All Maple Face Frames



5/8” Particleboard Door with Maple

Veneer & Maple Veneer banded edges



Wood Dovetailed Drawer



Soft-close Door/Drawer



Full Extension, Undermount Glides



Door Grain Direction: Vertical



Drawer Grain Direction: Horizontal

Available Colors:



Dark Sable (PA)

NOMENCLATURE

B = Base BC = Base Corner BEC = Base End Cabinet BER = Base Easy Reach

BPOF = Base Pull out Fluted Filler (Spice pull out) BPOP = Base Pull out Plain Filler (Spice pull out) BWB = Base Waste Basket

CCROWN = Cove Crown DB = Drawer Base DD = Double Door DEP = Decorative End Panel DWEP = Decorative Wall End Panel DWP = Dishwasher End Panel F = Filler

FB = Furniture Base FF = Fluted Filler FWF = Fluted Wall Filler LGCROWN = Large Crown LS = Lazy Susan MBAT = Batten

MDENTIL = Dentil Moulding

MICW = Inside Corner MLR = Light Rail MOCW = Outside Corner MQR = Quarter Round MROPE = Rope Moulding MSW = Scribe

MWC = Microwave Cabinet OC = Oven Cabinet ORG = Organizer P = Panel POS = Pull Out Shelf PR = Plate Rack REF = Refrigerator Panel REVCROWN = Reversible Crown ROS = Rosette

RW = Refrigerator Wall SB = Sink Base SCB = Sink Corner Base

SCB**FF = Sink Corner Base w/ Front & Floor SLGCROWN = Large Crown for Full Overlay SMCROWN = Small Crown

SSMCROWN = Small Crown for Full Overlay U = Utility

V = Valance VB = Vanity Base

VBL = Vanity Base Left Combo Unit VBR = Vanity Base Right Combo Unit VDB = Vanity Drawer Base VDT = Vanity Drawer Tray VSB = Vanity Sink Base W = Wall

WC = Wall Corner

WDC = Wall Diagonal Cabinet WEC = Wall End Cabinet WF = Wall Filler

WMD = Wall Mullion Door (Door prepped for Glass) WMDC = Wall Mullion Diagonal Cabinet (prepped Glass) WPOF = Wall Pull out Fluted Filler (Spice pull out) WPOP = Wall Pull out Plain Filler (Spice pull out) WR = Wine Rack

B12 =

Base 12” wide

(5)

WALL CABINETS

Cubes RW3312 6 RW3612 6 RW3318 9 RW3618 9 RW3324 11 RW3624 12

24” DEEP REFRIGERATOR

WALL CABINET

24” deep; double doors; all have butt doors. 12” & 18” tall cabinets do not include shelves. 24” cabinets include 1 shelf.

24 12 18 24

12” deep; double doors; no shelf; butt doors

Cubes W3012 3 W3312 3 W3612 3 12 12

12” WALL CABINET

Cubes W2418 DD 5 W3018 4 W3318 5 W3618 5

18” WALL CABINET

12” deep; double doors; no shelf; butt doors

12 18 Cubes W2124 * 4 W2424 DD 4 W2724 5 W3024 5 W3624 6

24” WALL CABINET

12” deep; double doors; one shelf; butt doors * This size comes as single door.

24 12 Cubes W2115 * 3 W2415 DD 3 W3015 4 W3315 4 W3615 4

15” WALL CABINET

15 12

12” deep; double doors; no shelf; butt doors. * These sizes come as single door.

30 12 Cubes W0930 2 W1230 3 W1530 4 W1830 4 W2130 5

30” SINGLE DOOR

WALL CABINET

12” deep; single door; two adjustable shelves W0930 Hudson & Saginaw only -- center panel is recessed due to size limitations

Cubes W0936 3 W1236 3 W1536 4 W1836 5 W2136 6

36” SINGLE DOOR

WALL CABINET

12” deep; single door; three adjustable shelves W0930 Hudson & Saginaw only -- center panel is

recessed due to size limitations

36 12 Cubes W2436 DD 6 W2736 7 W3036 8 W3336 9 W3636 9 W4236 ** 11

12” deep; double doors; three adjustable shelves; all have butt doors EXCEPT 4236. **4236 has stationary exposed stile between doors

36 12

36” DOUBLE DOOR

WALL CABINET

Cubes W2430 DD 5 W2730 6 W3030 7 W3330 7 W3630 8 W4230 ** 9 30 12

30” DOUBLE DOOR

WALL CABINET

12” deep; double doors; two adjustable shelves; all have butt doors EXCEPT 4230. **4230 has stationary exposed stile between doors

(6)

Cubes W0942 3 W1242 4 W1542 5 W1842 6 W2142 7 42 12

42” SINGLE DOOR

WALL CABINET

WALL CABINETS

12” deep; single door; three adjustable shelves; W0930 Hudson & Saginaw only -- center panel is recessed due to size limitations

Cubes W2442 DD 7 W2742 8 W3042 9 W3342 10 W3642 11 W4242 ** 13

12” deep; double doors; three adjustable shelves; all have butt doors EXCEPT 4242. **4242 has stationary exposed stile between doors.

42” DOUBLE DOOR

WALL CABINET

42 12 Cubes WDC2430 10 WDC2436 12 WDC2442 14 WMDC2430 10 WMDC2436 12 WMDC2442 14

DIAGONAL WALL CABINET

STANDARD & DOOR

PREPPED FOR GLASS

30 36 42

24 24

12

See notes in “Standard Walls Prepped for Glass” section for restrictions

Cubes WMD1530 4 WMD1830 4 WMD3030 7 WMD3630 8 WMD1536 4 WMD1836 5 WMD3036 8 WMD3636 9 WMD1542 5 WMD1842 6 WMD3042 9 WMD3642 11

WALL CABINETS

WITH DOORS

PREPPED FOR GLASS

30 36 42

12

Saginaw & Hudson Includes center mullions Dartmouth

Due to style limitations, does NOT include vertical or horizontal mullions Circa

Due to construction methods, mullion doors are not available in Circa. For a comparable look, choose Dartmouth.

Interior finished to match; 90° flat-front shelves edge banded to match interior

GLASS & GLASS CLIPS NOT INCLUDED -- *For exact fit, measure opening before ordering glass.

Cubes WEC1230 3 WEC1236 3 WEC1242 4 MWC3018 4

SPECIALTY WALL

CABINETS

Microwave Cabinet - MWC 18 30 12 30 36 42 Wall End Cabinet - WEC 12 12

MWC inside dimensions: 27” wide x 15” tall; includes loose 3/4” plywood shelf (14” deep) and finished interior to match exterior

(7)

WALL CABINETS

12” deep; single door; two shelves; blind cabinets can be pulled 3” 36” and 42” cabinets come with three shelves.

42” cabinets have double doors.

WALL CORNER

CABINETS

Cubes WC2430 5 WC3030 7 WC3630 8 WC4230 9 WC3036 9 WC3636 9 WC4236 12 WC3042 9 WC3642 11 WC4242 12 12 30 36 42 Wall Corner - WC

Blind opening = 6” on ALL sizes

SAGINAW

Actual Cabinet Width

Door

Width Blind Door Opening Center Stile Width Outside Cabinet Stile Depth of cabinets on the oppos-ing wall A. Minimum Pull (cabinet face frame from wall) B. Maximum Pull (cabinet face frame from wall) C. Minimum Filler Required C. Minimum Filler with 1-1/2” hardware* WC2430 23" 9” 6” 6” 1.5” 12” 0 4.5" 1/2" 2" WC3030, 3036, 3042 29" 15” 6” 6” 1.5” 12” 0 4.5" 1/2" 2" WC3630, 3636, 3642 35" 21” 6” 6” 1.5” 12” 0 4.5" 1/2" 2" WC4230, 4236, 4242 41" 12.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2" CIRCA,

DARTMOUTH & HUDSON

Actual Cabinet Width

Door

Width Blind Door Opening Center Stile Width Outside Cabinet Stile Depth of cabinets on the oppos-ing wall A. Minimum Pull (cabinet face frame from wall) B. Maximum Pull (cabinet face frame from wall) C. Minimum Filler Required C. Minimum Filler with 1-1/2” hardware* WC2430 23" 10.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2" WC3030, 3036, 3042 29" 16.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2" WC3630, 3636, 3642 35" 22.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2" WC4230, 4236, 4242 41" 14” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"

* dimension may change when using larger hardware

(two doors) (two doors) BLIND CABINET

WALL

ADJACENT CABINET B A C KEY

A: Minimum pull for Square Corner cabinets.

(formula: depth of cabinets on opposing wall (blind door opening + outside cabinet stile + 3/4” for functionality)

B: Maximum pull for Square Corner cabinets.

(formula: depth of cabinets on opposing wall (blind door opening (- minus) outside cabinet pull)

C: Minimum filler size required between cabinets.

Minimum pull figured when Square Corner Base/ Wall or adjacent cabinet doors can open 90°.

(8)

BASE CABINETS

BASE CORNER CABINETS

Cubes

LS36 26 BER33 18 BER36 26 BC36 18 BC42 21 BC48 23 27 27 30 30 BER33 BER36 18 18 18 18

Easy Reach - BER

34½ Lazy Susan - LS 34½ Base Corner - BC36 Stile: 6’ Blind opening = 9” 34½ 24 36 Base Corner - BC42 Stile: 6’ Blind opening = 13 1/2” 34½ 24 48 Base Corner - BC48 Stile: 6’ Blind opening = 19 1/2” 18 34½ 24 27

24” deep; single door BER: 2 adjustable shelves

BC: 1 adjustable shelf; all styles are standard overlay BER33 & BER36 Saginaw & Hudson only -- center panel is recessed due to size limitations

Actual Cabinet

Width

Door Width Blind Door

Opening Center Stile Width Outside Cabinet Stile Depth of Cabinets on the Opposing Wall Space for Door Operation A. Minimum Pull (cabinet face frame from wall) B. Maximum Pull (cabinet face frame from wall) C. Minimum Filler Required C. Minimum Filler with 1-1/2” hardware* X. Total Minimum Pull Y. Total Maximum Pull BC36 27" 10” 9” 6” 1 1/2” 24” 1/2" 8” 13 1/2” 1/2" 2" 35” 40 1/2” BC42 36" 14 1/2” 13 1/2” 6” 1 1/2” 24” 1/2" 3 1/2” 9" 1/2" 2" 39 1/2” 45” BC48 48" 20 1/2” 19 1/2” 6” 1 1/2” 24” 1/2" 0 3" 1/2" 2" 48” 51”

A: Minimum pull for Square Corner cabinets.

(formula: depth of cabinets on opposing wall (blind door opening + outside cabinet stile + 3/4” for functionality)

B: Maximum pull for Square Corner cabinets.

(formula: depth of cabinets on opposing wall (blind door opening (- minus) outside cabinet pull)

C: Minimum filler size required between

cabinets.* Dimension may change when using

larger hardware

Minimum pull figured when Square Corner Base/Wall or adjacent cabinet doors can open

90°. BLIND CABINET W A LL ADJACENT CABINET B A C X / Y

(9)

34½

24

BASE CABINETS

SINGLE DOOR

BASE CABINET

24” deep; single door, one drawer EXCEPT B09. * B09 has full height door and no drawer. B09 Hudson & Saginaw only -- center panel is recessed due to size limitations

Cubes DB12 6 DB15 8 DB18 9 DB21 11 DB24 12 DB30 15 DB36 18 34½ 24

DRAWER BASE CABINET

24” deep; three drawers. NOTE: Hudson comes with recessed panel top drawer and raised panel bottom drawers.

Cubes B09 * 5 B12 6 B15 8 B18 9 B21 11 34½ 24

DOUBLE DOOR

BASE CABINET

24” deep; double doors, one drawer; butt doors EXCEPT B42. **B42 has two drawers and a stationary exposed stile between doors.

Cubes B24 DD 12 B27 13 B30 15 B33 16 B36 18 B42 ** 21 34½ 24

SINK BASE CABINET

24” deep; double doors, no drawers;

**SB42 has stationary exposed stile between doors and two false fronts. SB42 does NOT have butt doors.

Cubes SB24 DD 12 SB27 13 SB30 15 SB33 16 SB36 18 SB39 19 SB42 ** 21

CORNER SINK

BASE CABINET

24” deep; single door. SCB: full cabinet SCBFF: face frame and floor only

Cubes SCB36 26 SCB33FF 1 SCB36FF 1 34½ 24 Cubes BEC12 L 6 BEC12 R 6 BWB18 9

BEC choose right or left hand; drawer head is stationary BWB includes 2 white 35 quart trash cans

34½ 34½

24

SPECIALTY BASE CABINET

Waste Basket Cabinet BWB18

Base End Cabinet BEC12

Left shown

(10)

TALL / UTILITY CABINETS

Cubes U1884 21 U1890 23 U1896 24 U2484 28 U2490 30 U2496 32

UTILITY CABINET

24” deep; includes one shelf between doors. Unfinished toekick is installed on all units. 84 90 96 24 Cubes SHELFKIT1824 1 SHELFKIT2424 1 Cubes OC3384 39 OC3390 42 OC3396 44

OVEN CABINET

Oven Opening - 24” high x 27” wide; Drawers may be removed and cut out to create a Double Oven opening. Cabinet Openings: OC3384: 18-3/4 x 27 OC3390: 24-3/4 x 27 OC3396: 30-3/4 x 27 NO Shelves in upper cabinet Oven cabinet has a 3” left and right stile running the entire height of the cabinet. As a result, Circa, Dartmouth and Hudson

doors and drawers are not full overlay.

84 90 96

24

PULL OUT SHELF

FOR BASE & TALL

Cubes POS12 1 POS15 1 POS18 1 POS21 1 POS24 1 POS27 1 POS30 1 POS33 1 POS36 1

Single drawer; solid wood dovetail construction -- FIELD INSTALLED

Overall height -- 2¼” Inside height -- 1½”

Pull out shelf includes dove tailed drawer box with side mounted epoxy glides, front spacer, and screws for installation

TALL / UTILITY CABINETS

VANITY CABINETS

Cubes VSB24 DD 11 VSB27 12 VSB30 13 VSB33 14 VSB36 16 VSB48 * 21 34½ 21

VANITY SINK

BASE CABINET

21" deep; double doors; no drawers; butt doors; *VSB48 includes two false fronts and a center mullion between

Cubes VBL30 13 VBR30 13 VBL36 15 VBR36 15 VBL42 18 VBR42 18

VANITY COMBO CABINET

21" deep; double butt doors on 36 & 42 widths, single door on 30" width. VBL: drawers on left / VBR: drawers on right

34½ 21 30 36 42 Cubes VDB12 6 VDB15 7 VDB18 8 21 34½

VANITY DRAWER

BASE CABINET

21” deep; four drawers.

Cubes

VB15 7

VB18 8

VANITY BASE CABINET

21” deep; single door; one drawer.

34½

21

Cubes

VDT36 3

21” deep; trimmable to 27-1/2” wide.

UNDERMOUNT DRAWER

21 36 6-3/8”

(11)

5 49 Straight Valance

ACCESSORIES

Cubes PR30 4 WR30 4 ORG36 2 BARBRACKET 0.1 HOOD 4 HOODT 4

ACCESSORIES & HOODS

18 30 12 Wine Rack - WR30 12” Deep; 18” high; matching interior Organizer - ORG36 12” Deep; 6” high; matching interior 6 12 36 24 30 8

Standard Hood - HOOD

Includes BROAN 250CFM Ventilation Module 30 18 Plate Rack - PR30 12” Deep; 18” high; matching interior 12 24 30 8

Hood w/Trim- HOODT

Includes BROAN 250CFM Ventilation Module

Decorative rail ships loose. Hood may be used with or without rail.

Some items are not designed to hold glazing. In these cases, the item will not have visible decorative glazing .

8 8

Bar Bracket

2-7/16” wide

SPICE RACK PULL OUTS

Plain Front Cubes

WPOP3x30 1 WPOP3x36 1 WPOP3x42 1 BPOP3x30 2 Cubes F330 * 1 F630 * 1 WF336 1 WF636 1 WF342 1 WF642 1 F396 1 F696 1

STANDARD

FILLER

Cubes FF330 * 1 FF630 * 1 FWF336 1 FWF636 1 FWF342 1 FWF642 1 FF396 1 FF696 1

FLUTED

FILLER

Cubes V549RA 0.25 V549ST 0.25 V573RA 0.25 V573ST 0.25

VALANCE

Fluted Front WPOF3x30 1 WPOF3x36 1 WPOF3x42 1 BPOF3x30 2

F330 & F630 may be used for either bases or 30” walls

All fillers are 3/4” thick.

F330 & F630 may be used for either bases or 30” walls. Flutes begin 1-3/4” from each end of the filler. All fillers are 3/4” thick. Includes field-applied filler. This item

must be installed between two cabinets.

Some items are not designed to hold glazing. In these cases , the item will not have visible decorative glazing .

Roman Arch Valance

5 49 73

6.25

6.25

Fillers are finished on the face, left, and right hand sides, however the sides receive a lesser

finish. If you require an end to be exposed we suggest using a valance.

Number of Shelves: BPOP / BPOF - 2 shelves WPOP / WPOF 30” - 3 shelves WPOP / WPOF 36” - 4 shelves WPOP / WPOF 42” - 5 shelves

3 Wall: 30 36 42 Base: 30 Plain Front 3 Wall: 30 36 42 Base: 30 Fluted Front

All valances are 3/4” thick solid maple

Includes field-applied filler. This item must be installed between two cabinets.

(12)

PANELS

P4836 Finished End Panel — 48” x 36” x 1/4” (grain runs with 36”) — plywood veneer P4896 Finished End Panel — 48” x 96” x 1/4” (grain runs with 96”) — plywood veneer

BP4896 Finished Beaded Panel — 48” x 96” x 1/4” (not available with Glaze) (bead runs with 96”) — plywood veneer REFP24 ** Finished Refrigerator Panel — 24” x 96” with 1-1/2” stile — 1/2” vinyl laminate panel

3/4REFP24 ** Finished Refrigerator Panel — 24” x 96” with stained veneer applied to front, back 1 long edge — 3/4” panel REFP30 ** Finished Refrigerator Panel — 30” x 96” with 1-1/2” stile — 1/2” vinyl laminate panel

3/4REFP30 ** Finished Refrigerator Panel — 30” x 96” with stained veneer applied to front, back 1 long edge — 3/4” panel DWP3 ** Dishwasher End Panel with 3” filler — 24” , 34-1/2” with 3” stile — 1/2” vinyl laminate panel

DWP6 ** Dishwasher End Panel with 6” filler — 24” x 34-1/2” tall with 6” stile — 1/2” vinyl laminate panel Cubes 1 1 1 2 2 3 2 2 3

PANELS

DECORATIVE

END PANELS

DWEP30 Decorative End Panel for 30” Wall Cabinet DWEP36 Decorative End Panel for 36” Wall Cabinet DWEP42 Decorative End Panel for 42” Wall Cabinet DEPVB Decorative End Panel for Vanity Base Cabinet

DEPB Decorative End Panel for Base Cabinet

Cubes .10 .10 .10 .10 .10

Some items are not designed to hold glazing. In these cases, the item will not have visible decorative glazing . ** Panels are finished to match with vinyl laminate on “face” side only

Inner side finished in natural vinyl laminate on stained products Inner side finished in white vinyl laminate on painted products 1/4” DWEP30 -10 x 28 DWEP36 -10 x 34 DWEP42 -10 x 40 DEPVB - 19 x 28 DEPB - 22 x 28 Saginaw - Standard Overlay

DWEP30 -11 ¼ x 29 5/16 DWEP36 -11 ¼ x 35 5/16 DWEP42 -11 ¼ x 41 5/16

DEPVB - 20 ¼ x 29 DEPB - 23 ¼ x 29 Circa, Dartmouth & Hudson - Full Overlay

(13)

3/4”

MOULDINGS

1-3/8”

2-1/16”

SMCROWN214

SSMCROWN214

LGCROWN4

2-1/4” Crown;

8 foot long pieces; sold by the piece; .125 cubes

2-1/4” Full Overlay Crown;

Seated on top of cabinet with 3/8” top nailing flange; 8 foot long pieces;

sold by the piece; .25 cubes

4” Full Overlay Crown;

Seated on top of cabinet with 3/8” top nailing flange; 8 foot long pieces;

sold by the piece; .25 cubes

SLGCROWN4

4” Full Overlay Crown;

8 foot long pieces; sold by the piece; .25 cubes

2-1/2” 4” 1-3/8” 2-1/16” 3/8” 3/8” 2-1/2” 4”

Drawings not to scale. Please use dimensions shown. Available in all colors. Some items do not hold glaze. See note below.

ROS3

3” Rosette; $16

sold individually; .1 cubes

ROS6

6” Rosette; $26

sold individually; .1 cubes

1-1/2”

1-1/4”

3/4” 5/16” 1/4”

CCROWN134

MLR

MSW

1-3/4” Cove Crown;

8 foot long pieces; sold by the piece; .125 cubes

Light Rail;

8 foot long pieces; sold by the piece; .083 cubes

Scribe;

8 foot long pieces; sold by the piece; .083 cubes

MBAT

Batten;

8 foot long pieces; sold by the piece; .083 cubes

MQR

Quarter Round;

8 foot long pieces;

sold by the piece; .083 cubes

3/4” 1-1/8” 3/4” 3/4” 3/4” 3/4” 1/4” 3/4” 3/4” 3/4” 3/4”

MICW

MOCW

MDENTIL

Inside Corner;

8 foot long pieces;

sold by the piece; .083 cubes

Outside Corner;

8 foot long pieces;

sold by the piece; .083 cubes

Dentil Inlay;

8 foot long pieces;

sold by the piece; .125 cubes

MROPE

Rope Inlay;

8 foot long pieces; sold by the piece; .125 cubes

FB

4-1/2” Furniture Base;

8 foot long pieces; sold by the piece; .25 cubes

1/4” 3/4” 3/4” 4-1/2 3” 6” 3/4”

REVCROWN

4-way adjustable cove and shaker combo;: 8 foot long pieces; sold by the piece; .25 cubes

2-5/16” 2-1/2” Cove Full Overlay 2-1/4” 2-5/16” Cove Standard Overlay 2-1/2” 2-1/2” Shaker Full Overlay 2-3/8” 2-3/8” Shaker Standard Overlay

TOEKICK

4-1/2” Toekick;

8’long pieces; sold by pc;.083 cubes

1/4” 4-1/2” REVCROWN MSW MBAT MQR MOCW MICW MROPE MDENTIL TOEKICK The items below are not designed to hold glazing. Heritage Brown will not have visible decorative glazing. For Crimson Glaze, order standard Crimson.

(14)

WOLF Classic Cabinets Five-Year Limited Warranty

WOLF Classic Cabinets have been manufactured under the highest standards of quality and workmanship.

FIVE-Year Limited Warranty on Cabinets, Drawer Guides and Hinges

WOLF warrants to original consumer purchasers for five years from date of original purchase that cabinets, drawer,

drawer guides and hinges used in the manufacture of WOLF Classic Cabinets shall be free from defects in material and

workmanship under normal use.

General Warranty Guidelines

Should WOLF Classic Cabinets fail during the applicable warranty period due to defects in the material or workmanship

under normal use, WOLF, in its discretion, will repair or provide the parts necessary to replace the defective products.

This warranty is only applicable to products used in residential applications in the United States and is not transferable.

This warranty does not cover products that are misused, abused, mishandled, improperly installed, improperly stored,

changed, modified or subject to extreme temperatures or extreme moisture levels, or normal wear and tear. This warranty

is not valid for products used for any purpose other than the purpose for which they were originally intended. This warranty

does not cover the cost of installation, removal, subsequent damage or transportation of the defective product, regardless

of whether the work was performed by a contractor, service company or the consumer.

Variations in color and grain pattern are a natural characteristic of wood. Color changes also may result from exposure

to light, heat, smoke, household cleaners, and other elements and environmental conditions that are part of the aging

process. These material variations and changes are not covered by this warranty. WOLF reserves the right to substitute

discontinued product with the most similar product in styling, wood species and color available at the time a claim is

submitted.

Paint finishes are uniquely different from standard wood finishes. On all wood products, expansion and contraction are

typical due to changes in climate conditions. Due to this normal movement, paint finishes may develop slight separation

lines, finish breaks and seam lines. With use of selected hardwoods and veneers, some grain pattern and wood

characteristics (checks, pin knots) as well as seams and joints will remain visible through the paint finish. Over time,

there may be a slight color shift, due to exposure to natural and artificial light. These normal conditions are not considered

quality defects and are not covered by this warranty.

THIS WARRANTY IS THE EXCLUSIVE WARRANTY OF WOLF AND IS IN LIEU OF AND WOLF DISCLAIMS ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or

exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights that

vary from state to state.

To submit a claim under this warranty, contact your nearest WOLF Classic Cabinets dealer or send a letter explaining

the defect along with photos and a dated sales receipt as proof of purchase to the address below.

WARRANTY

(15)

Figure

Updating...

References

Related subjects :