• No results found

Configuration Optimization for maximum load bearing capacity per unit weight of a Plane Truss using Exhaustive Searching approach

N/A
N/A
Protected

Academic year: 2020

Share "Configuration Optimization for maximum load bearing capacity per unit weight of a Plane Truss using Exhaustive Searching approach"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig 1: A nine member truss with a unit load at the end.
Fig 2: Q m as a function of y.

References

Related documents

For example, the clock branch shared implicit pulsed flip-flop (CBS-ip DEFF), is a double edge triggered flip-flop. Double clock edge triggering method reduces the

The subject of environmental protection was restricted to the areas of renewable energies/efficient use of energy, drinking water supply and wastewater disposal.. Procedure

If the secondary, as well as the pri- mary, deviation with the eyes straight ahead becomes negligible after several weeks of patching, success with the double

Parallelism method by CUDA on the graphics processing unit, in the case the threads have great access to the global memory and shared memory is not used, runtime

The treated MDF along with untreated control samples in six replicates were studied against white rot fungus ( Polyporous versicolor ). After the completion of 12

Objective: To determine if inspiratory capacity (IC) assessment could be useful for chronic obstructive pulmonary disease (COPD) patient management in the primary care

alleles explains the lack of a family history in most patients, and the presence of variants previously described as causing frontotemporal dementia suggests a mechanistic

The supply of glutamate by astrocytes is coordinated with neuronal activity - increase in external concentration of glutamate increases release of glutamine [54]