• No results found

Simulation of ductile crack growth in cracked pipes using the gtn model

N/A
N/A
Protected

Academic year: 2020

Share "Simulation of ductile crack growth in cracked pipes using the gtn model"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2. (a) Comparison of FE simulation results (Le = 0.2 mm) with experimental J-R data, and (b) the effect of the element size Le on FE simulation results
Figure 3. (a) The effect of
Figure 5. (a) Schematic illustration of crack tip element and FE meshes for simulating C(T) test; the  minimum element size of (b) Le = 0.2mm
Figure 6. The effect of  C in Figure 5(a) on simulated J-R curves.
+4

References

Related documents

The inadequate supply of medical and allied personnel to carry out a good national program for the maternal, child health and crippled children’s services, and the ways and means

Although professional development and evaluation do not cause high levels of teacher efficacy or increased student outcomes, administrators in Lincoln County School District can

Furthermore, after implementation directly on the notification in iDu (iLearning Education) Rinfo at Raharja College, the application of notification as a means of delivering

Thomson MM, Delgado E, Herrero I, et al.: Diversity of mosaic structures and common ancestry of human immunodeficiency virus type 1 BF intersubtype recombinant viruses

From Fig. 39 the occurrences of delayed requests are high. This is as antici- pated, since the elastic services are not prioritized. Thus, its a higher probability that they will

The objective of this study was to study the effect of using the two enamel protective agents before bonding on the shear bond strength of orthodontic brackets bonded with

The advantage of selecting certain features for inclusion in the association rule mining process is that only those attributes relevant to the classifi cation task at hand are used